Design and Fabrication of a Mono-Bloc Mixer Extruder Machine for The Production of Gum From Cassava Starch

Yıl 2020, Cilt: 4 Sayı: 1, 29 - 35, 27.03.2020

Ayodeji Omotehinse

Öz

The machines for gum production from cassava starch are very
expensive and complex which made it difficult for local cassava farmers to
procure, install and operate. A simple machine known as Mono-bloc mixer
extruder machine for the production of gum from cassava starch was designed and
fabricated using locally available materials. Several experimental procedures
were carried out which include the selection of materials for the machine,
design calculations for the various parts of the machine, performance
evaluation test and efficiency determination. Performance evaluation test and observation
revealed that for best results, the cooking time of the starch solution with other
gum additives should be 30minutes and the cooking temperature had to be in the
range 80⁰C
– 95⁰C (within the dextrinization zone).
The results also revealed that the designed and fabricated machine could
produce gum from cassava starch effectively and easy to install, operate and
maintain. The machine produced had a capacity of producing 5.175litres of
dextrin gum per minute and an efficiency of 85%.

Anahtar Kelimeler

White dextrin; dextrinization temperature; machine design; fabrication; mono-bloc mixer.

Kaynakça

• [1] B. Daramola and B.A Osanyinlusi, “Investigation on modification of cassava starch using active components of ginger roots”, African Journal of Biotechnology. Vol. 5, No.10, pp 917 – 920, 2006.
• [2] Y.J. Wang, P.P. White, J.I. Jane, “Characterization of starch structures of 17 maize endosperm mutant genotypes with Oh 43 inbred line background”. Cereal Chem. 10: 171-179.
• [3] J.N. BeMiller and W. Lafayette, “Starch Modification: Challenges and Prospects.” Starch and Starke, Vol. 49, No. 2, pp. 127 -131, 1997.
• [4] R.W. Satterwaite, and D.J. Iwinski, “Starch Dextrins” In Industrial Gums, Whistler R.L. and BeMiller J.N. (eds). Second Edition. Academic Press, New York. 1973, pp.577 – 599. Meer, et al.,“A handbook on the Production of Gum”. Second edition Academic press London.
• [5] R.L. Whistler, “Factors influencing gum costs and applications.” In: Industrial Gums. Whistler R.L and BeMiller J.N. (eds.). Second edition. Academic Press, New York. 1973, pp. 5 – 18.
• [6] W.H. McNeely, and K.S. Kang, “Xanthan and some other biosynthetic gums,” In: Industrial Gums. Whistler R.L. and BeMiller J.N. (eds.). Second Edition. Academic Press, New York. 1973, Pp. 474 – 495.
• [7] A.L. Woiciechowski, C.R. Soccol, S.N. Rocha, A. Pandey, “Xanthan gum production from cassava bagasse hydrolysate with Xanthomonas campestris using alternative sources of nitrogen”. Appl Biochem Biotechnol., 118(1-3):305-12, 2004.
• [8] B.A. Aliyu, and K.B. Aliyu, “Re-inventing the production of adhesive from Cassava starch as a career opportunity in chemistry education. International Letters of Natural Sciences”, Vol. 18, pp 12-19, 2014.
• [9] O.S. Azeez, “Production of Dextrins from Cassava Starch. Leonardo Journal of Sciences”, issue 7, pp.7-16, 2005.
• [10] A.J. Gunorubon, “Production of cassava starch based adhesive”, Research Journal in Engineering and Applied Sciences 1(4): pp. 219-214, 2012.