Araştırma Makalesi
BibTex RIS Kaynak Göster

DESIGN AND FABRICATION OF SOLAR DRYER FOR HIGH POTENTIAL AGRO-PRODUCE IN MIDWEST REGION OF NIGERIA

Yıl 2021, Cilt: 5 Sayı: 2, 47 - 57, 30.06.2020

Öz

Solar drying utilizes sun energy to heat air for the drying of materials. It enhances preservation and shelf life of agricultural-produce. The limitations of the conventional open sun drying which include direct exposure to sun rays, animal attack, improper hygiene and unpredictable rainfall, necessitated the development of a forced draft solar dryer to mitigate such setbacks using locally sourced materials.
The produced dryer comprises of solar collector, fan and drying chamber with tray racks. Air from the DC powered fan is heated up in the collector and channelled to the drying chamber where it aids drying. Design and analysis were done with consideration of the geographical region and period under review. Meteorological data for relative humidity, solar irradiation, wind speed and ambient temperature were obtained using standard equipment. The topography, direction, and maximum solar irradiance impinging on the solar collector were determined by measuring the angle of tilt which was a major factor in the drying process.
Test procedures carried out with drying of yam, cassava and plantain chips within the given period showed that average temperature of the dryer was 45°C and average ambient temperature was 39.4°C. Drying was completed in 2 to 3 days with the dryer, while open sun drying was completed in 5 or more days.
Fabrication and testing of the machine was carried out in a given planting and harvesting period (October to December) in the Midwest southern region of Nigeria hence, data recorded for the period under review will be helpful to farmers in forecasting weather trends and enable them carry out agricultural processing effectively. The rapid rate of drying in the dryer showed it is efficient in the drying of agricultural produce.

Kaynakça

  • Abdullahi, Y, Momoh, M, Garba, MM & Musa, M 2013, Design and Construction of an Adjustable and Collapsible Natural Convection Solar Food Dryer, International Journal of Computational Engineering Research, Vol. 03, Issue 6, pp. 1-8.
  • Akinboro, FG, Adejumobi, IA & Makinde, V 2012, Solar Energy Installation in Nigeria: Observations, Prospect, Problems and Solution, Transnational Journal of Science and Technology, May edition, vol. 2, No.4, pp. 73-84
  • Corcione, M 2007, Heat transfer correlations for free convection from upward-facing horizontal rectangular surfaces, WSEAS TRANSACTIONS on HEAT and MASS TRANSFER, vol. 2, Issue 3, pp. 48-60.
  • Ekechukwu, OV & Norton, B 1997, Review of solar-energy drying systems II: an overview of solar drying technology, Energy Conversion & Management 40, pp. 615-655.
  • Faninger, G 2010, The Potential of Solar Thermal Technologies in a Sustainable Energy Future, IEA Solar Heating & Cooling Programme.
  • Garg, HP 1987, Advance in Solar Energy Technology: heating Agricultural and Photovoltaic application of Solar Energy, vol. 3, The Netherlands: D. Reidel publishing company.
  • Hii, CL, Jangam, SV, Ong, SP & Mujumdar, A.S (2012). Solar Drying: Fundamentals, Applications and Innovations. Centre of Food and Bio-product Processing, University of Nottingham, Malaysia Campus and the Transport Phenomena (TPR) Group, National University of Singapore. http://serve.me.nus.edu.sg/arun/.
  • Soteris, K 2009, Solar energy engineering: processes and systems, Academic Press, London, UK.
Yıl 2021, Cilt: 5 Sayı: 2, 47 - 57, 30.06.2020

Öz

Kaynakça

  • Abdullahi, Y, Momoh, M, Garba, MM & Musa, M 2013, Design and Construction of an Adjustable and Collapsible Natural Convection Solar Food Dryer, International Journal of Computational Engineering Research, Vol. 03, Issue 6, pp. 1-8.
  • Akinboro, FG, Adejumobi, IA & Makinde, V 2012, Solar Energy Installation in Nigeria: Observations, Prospect, Problems and Solution, Transnational Journal of Science and Technology, May edition, vol. 2, No.4, pp. 73-84
  • Corcione, M 2007, Heat transfer correlations for free convection from upward-facing horizontal rectangular surfaces, WSEAS TRANSACTIONS on HEAT and MASS TRANSFER, vol. 2, Issue 3, pp. 48-60.
  • Ekechukwu, OV & Norton, B 1997, Review of solar-energy drying systems II: an overview of solar drying technology, Energy Conversion & Management 40, pp. 615-655.
  • Faninger, G 2010, The Potential of Solar Thermal Technologies in a Sustainable Energy Future, IEA Solar Heating & Cooling Programme.
  • Garg, HP 1987, Advance in Solar Energy Technology: heating Agricultural and Photovoltaic application of Solar Energy, vol. 3, The Netherlands: D. Reidel publishing company.
  • Hii, CL, Jangam, SV, Ong, SP & Mujumdar, A.S (2012). Solar Drying: Fundamentals, Applications and Innovations. Centre of Food and Bio-product Processing, University of Nottingham, Malaysia Campus and the Transport Phenomena (TPR) Group, National University of Singapore. http://serve.me.nus.edu.sg/arun/.
  • Soteris, K 2009, Solar energy engineering: processes and systems, Academic Press, London, UK.
Toplam 8 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Articles
Yazarlar

Harrison Itoje Bu kişi benim

Martins Osikhuemhe Bu kişi benim

Peter Akhator

Bashir Musa

Yayımlanma Tarihi 30 Haziran 2020
Yayımlandığı Sayı Yıl 2021 Cilt: 5 Sayı: 2

Kaynak Göster

IEEE H. Itoje, M. Osikhuemhe, P. Akhator, ve B. Musa, “DESIGN AND FABRICATION OF SOLAR DRYER FOR HIGH POTENTIAL AGRO-PRODUCE IN MIDWEST REGION OF NIGERIA”, IJESA, c. 5, sy. 2, ss. 47–57, 2020.

ISSN 2548-1185
e-ISSN 2587-2176
Period: Quarterly
Founded: 2016
Publisher: Nisantasi University
e-mail:ilhcol@gmail.com