Exergy Cost Analysis of New Method for Efficiency Improvement in Small Gas Turbines Using LNG Cold Exergy
Abstract
The gas turbine systems are some equipment; that have extensive industrial and military applications due to their unique characteristics. One of the major problems in association with utilization of gas turbines is the output power and thermal efficiency. One of the major methods that are used for increasing the power and thermal efficiency in this type of power systems is compressor's inlet air cooling. In this paper, the effect of fuel replacement for methane gas-fired gas turbines with LNG and cooling the compressor's air inlet with the cold exergy of LNG fuel evaporation will be examined. In the first step, the energy balance equation is applied to the gas turbine with Methane and LNG fuel separately. Then the problem of fuel replacement in some mini and micro gas turbine has been examined and the appropriate engine with the most power and thermal efficiency is selected. In next step, the exergetic analysis of considered systems is performed and exergetic parameters of two systems are compared together. Finally, the advance exergy analysis is performed and effects of fuel replacement on exergetic cost parameter and environmental characteristics are evaluated.
Keywords
References
- [1] Pegg R. Foster, Method and apparatus for increasing power output and/or thermal efficiency of a gas turbine power plant, (1971) US3796045A.
- [2] B. Mohanty, G .PalosoJr, Enhancing gas turbine performance by intake air cooling using an absorption chiller, Heat Recovery Systems and CHP, 15 (1) (1995) 41-50.
- [3] M. De Lucia, C. Lanfranchi, V. Boggio, Benefits of Compressor Inlet Air Cooling for Gas Turbine Cogeneration Plants, International Gas Turbine and Aeroengine Congress and Exposition, (1995) doi:10.1115/95-GT-311.
- [4] Y.S.H. Najjar, Enhancement of performance of gas turbine engines by inlet air cooling and cogeneration system, Applied Thermal Engineering, 16 (2) (1996) 163-173.
- [5] J. Palsson, A. Selimovic, L. Sjunnesson, Combined solid oxide fuel cell and gas turbine systems for efficient power and heat generation, Journal of Power Sources , 86 (1–2) (2000) 442-448.
- [6] A.M. Bassily, Effects of evaporative inlet and after-cooling on the recuperated gas turbine cycle, Applied Thermal Engineering, 21 (18) (2001) 1875-1890.
- [7] F.J. Wang, J.S. Chiou, Integration of steam injection and inlet air cooling for a gas turbine generation system, Energy Conversion and Management, 45 (1) (2004) 15-26.
- [8] M.M. Alhazmya, Y.S.H .Najjar, Augmentation of gas turbine performance using air coolers, Applied Thermal Engineering 24 ( 2–3) (2004) 415-429.
Details
Primary Language
English
Subjects
Engineering
Journal Section
Research Article
Publication Date
December 4, 2018
Submission Date
September 5, 2018
Acceptance Date
October 21, 2018
Published in Issue
Year 2018 Volume: 21 Number: 4