Advanced Exergoeconomic Analysis of Organic Rankine Cycle Waste Heat Recovery System of a Marine Power Plant

Year 2017, Volume: 20 Issue: 3, 140 - 151, 01.09.2017

T. Koroglu , O. S. Sogut

https://doi.org/10.5541/eoguijt.336700

Cited By: 14

Abstract

In this paper, superheated and saturated
vapor ORCs commonly utilized as waste heat recovery systems of a marine power
plant are investigated. First, a parametric study with different organic fluids
has been carried out by applying conventional exergy and exergoeconomic
analyses to the system considered in order to identify the best possible
operating conditions and also to evaluate the findings of conventional
exergy-based analyses. Then, advanced exergy and exergoeconomic analyses have
been performed on ORCs by splitting exergy destruction rates, exergy
destruction costs and investment costs of components and overall system to
identify avoidable parts of costs and exergy destructions. Finally, decision
criteria were suggested on the selection of more appropriate system depending
on the results of the analysis.

Keywords

Organic Rankine cycle; advanced exergy; marine power plant; advanced exergoeconomics; organic fluids

References

• [1] R. K. Pachauri, et al., Climate Change Synthesis Report. Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, 2014. [2] T. Smith, et al., Third IMO GHG Study, International Maritime Organization (IMO), London, 2014. [3] Z. Bazari, T. Longva, “Assessment of IMO mandated energy efficiency measures for international shipping,” International Maritime Organization, 2011. [4] Ø. Buhaug, et al., Second IMO GHG Study. International Maritime Organization (IMO), London, UK, 2009. [5] MARPOL IMO. (2006). Consolidated Edition 2006, MARPOL Annex VI: Regulations for the prevention of air pollution from ships. London: International Maritime Organization, 2006. [6] F. Baldi, & C. Gabrielii, “A feasibility analysis of waste heat recovery systems for marine applications,” Energy, doi:10.1016/j.energy.2014.12.020. [7] MAN Diesel&Turbo., 2014, Waste heat recovery system (WHRS) for reduction of fuel consumption, emissions and EEDI. Kopenhagen, Denmark. [8] S. Alvik, M. S. Eide, O. Endresen, P. Hoffmann, T. Longva, “Pathways to low carbon shipping-abatement potential towards 2030”, TRID, 2009. [9] Wärtsilä. Solution for merchant vessels. In W. r. Corporation (Ed.), 2010. [10] MAN Diesel Turbo., 2014, Thermo efficiency system for reduction of fuel consumption and CO2 emission. Kopenhagen, Denmark,. [11] G. Shu, et al., 2015, “ A review of waste heat recovery on two-stroke IC engine aboard ships,” Renewable and Sust. En. Rev., doi:10.1016/j.rser.2012.11.034. [12] C. Sprouse III, C. Depcik, 2012, “Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery,” Applied Thermal Engineering, doi:10.1016/j.applthermaleng.2012.10.017 [13] I. Vaja, A. Gambarotta, 2009, “Internal Combustion Engine (ICE) bottoming with Organic Rankine Cycles (ORCs),” Energy, doi:10.1016/j.energy. 2009.06.001. [14] K. K. Srinivasan, P. J. Mago, S. R. Krishnan, 2010, “Analysis of exhaust waste heat recovery from a dual fuel low temperature combustion engine using an Organic Rankine Cycle,” Energy, doi:10.1016/j.energy.2010.02.018. [15] H. Tian, G. Shu, H. Wei, X. Liang, L. Liu, 2012, “Fluids and parameters optimization for the organic Rankine cycles (ORCs) used in exhaust heat recovery of Internal Combustion Engine (ICE),” Energy, doi:10.1016/j.energy.2012.09.021. [16] S. Zhu, K. Deng, S. Qu, 2013, “Energy and exergy analyses of a bottoming Rankine cycle for engine exhaust heat recovery,” Energy, doi:10.1016/j.energy.2013.06.031. [17] P. J. Mago, L. M. Chamra, 2008, “Exergy analysis of a combined engine-organic Rankine cycle configuration,” Proceedings of the Institution of Mechanical Engineers, Part A: J. Power Energy, doi:10.1243/09576509JPE642. [18] E. H. Wang, et al., 2011, “Study of working fluid selection of organic Rankine cycle (ORC) for engine waste heat recovery,” Energy, doi:10.1016/j.energy.2011.03.041. [19] E. H. Wang, et al., 2012, “Performance analysis of a novel system combining a dual loop organic Rankine cycle (ORC) with a gasoline engine,” Energy, doi:10.1016/j.energy.2012.04.006. [20] B. C. Choi, Y. M. Kim, 2013, “Thermodynamic analysis of a dual loop heat recovery system with trilateral cycle applied to exhaust gases of internal combustion engine for propulsion of the 6800 TEU container ship,” Energy, doi:10.1016/j.energy.2013.05.017. [21] E. Yun, H. Park, S. Y. Yoon, K. C. Kim, “Dual parallel organic Rankine cycle (ORC) system for high efficiency waste heat recovery in marine application,” J. Mechanical Science and Technology, 29, 2509-2515, 2015. [22] D. S. A. Bellolio, V. Lemort, P. Rigo, “Organic Rankine cycles systems for waste heat recovery in marine applications,” in the International Conference on Shipping in Changing Climates, Glasgow, 24-26th November, 2015. [23] J. Song, Y. Song, C.-W. Gu, 2015, “Thermodynamic analysis and performance optimization of an Organic Rankine Cycle (ORC) waste heat recovery system for marine diesel engines,” Energy, doi:10.1016/j.energy.2015.01.108. [24] M.-H. Yang, R.-H. Yeh, 2014, “Analyzing the optimization of an organic Rankine cycle system for recovering waste heat from a large marine engine containing a cooling water system,” Energy Conversion and Management, 88, doi:10.1016/j.enconman.2014.09.044. [25] M.-H. Yang, R.-H. Yeh, 2015, “Thermodynamic and economic performances optimization of an organic Rankine cycle system utilizing exhaust gas of a large marine diesel engine,” Applied Energy, doi:10.1016/j.apenergy.2015.03.083. [26] M.-H. Yang, R.-H. Yeh, 2015, “Thermo-economic optimization of an organic Rankine cycle system for large marine diesel engine waste heat recovery,” Energy, doi:10.1016/j.energy.2015.01.036. [27] M.-H. Yang, 2015, “Thermal and economic analyses of a compact waste heat recovering system for the marine diesel engine using transcritical Rankine cycle,” Energy Conversion and Management, doi:10.1016/j.enconman.2015.10.050. [28] M. Kalikatzarakis, C. A. Frangopoulos, “Multi-criteria selection and thermo-economic optimization of Organic Rankine Cycle system for a marine application,” Int. J. Thermodynamics, 18, 133-141, 2015. [29] T. Koroglu, O. S. Sogut, 2017, “Advanced exergy analysis of an organic Rankine cycle waste heat recovery system of a marine power plant,” J. Thermal Engineering, doi:10.18186/thermal.298614. [30] A. Bejan, M. J. Moran, G. Tsatsaronis, Thermal design and optimization: John Wiley and Sons, 1996. [31] F. Baldi, F. Ahlgren, T.-V. Nguyen, C. Gabrielii, & K. Andersson, “Energy and exergy analysis of a cruise ship,” in the The 28th ECOS: International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2015. [32] F. Baldi, H. Johnson, C. Gabrielii, K. Andersson, 2014, “Energy and exergy analysis of ship energy systems-the case study of a chemical tanker,” in the 27th ECOS, International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. [33] P. Marty, J.-F. Hétet, D. Chalet, P. Corrignan, “Exergy analysis of complex ship energy systems,” in the 7th International Exergy, Energy and Environment Symposium, Valenciennes, France. 27-30 April, 2015. [34] T. J. Kotas, The exergy method of thermal plant analysis: Butterworth Publishers,Stoneham, MA, 1985. [35] T. Morosuk, G. Tsatsaronis, 2009, “Advanced exergy analysis for chemically reacting systems–application to a simple open gas-turbine system” International Journal of Thermodynamics, 12, 105-111. [36] T. Koroglu, O .S. Sogut, 2015, “Advanced exergy analysis of a Marine Diesel Engine waste heat recovery system,” in the International Conference on Shipping in Changing Climates, Glasgow, 24-26th November, 2015. [37] G. Tsatsaronis, T. Morosuk, 2007, “Advanced exergoeconomic evaluation and its application to compression refrigeration machines,” in the ASME 2007 International Mechanical Engineering Congress and Exposition. [38] F. Petrakopoulou, Comparative evaluation of power plants with CO2 capture: thermodynamic, economic and environmental performance. (Dr.-Ing), Berlin Technical University, Berlin, 2010. [39] F. Cziesla, G. Tsatsaronis, Z. Gao, 2006, “Avoidable thermodynamic inefficiencies and costs in an externally fired combined cycle power plant,” Energy, 31, 1472-1489. [40] A. Gungor, G. Tsatsaronis, H. Gunerhan, & A. Hepbasli, 2014, “ Advanced exergoeconomic analysis of a gas engine heat pump (GEHP) for food drying processes,” Energy Conversion and Management, doi:10.1016/j.enconman.2014.11.044. [41] F. Petrakopoulou, G. Tsatsaronis, T. Morosuk, A. Carassai, 2012, “Advanced exergoeconomic analysis applied to a complex energy conversion system.,” J. Engineering of Gas Turbines and Power, 134, 031801. [42] M. Tan, A. Keçebaş, 2014, “Thermodynamic and economic evaluations of a geothermal district heating system using advanced exergy-based methods,” Energy Conversion and Management, 77, 504-513. [43] G. Tsatsaronis, T. Morosuk, 2008, “A General Exergy-Based Method for Combining a Cost Analysis With an Environmental Impact Analysis: Part I—Theoretical Development,” in the ASME 2008 International Mechanical Engineering Congress and Exposition. [44] G. Tsatsaronis, M.-H. Park, 2002, “On avoidable and unavoidable exergy destructions and investment costs in thermal systems,” Energy Conversion and Management, 43, 1259-1270. [45] Y. A. Cengel, M. A. Boles, Thermodynamics : an engineering approach. New York: McGraw Hill, 2015. [46] T. Morosuk, G. Tsatsaronis, “A new approach to the exergy analysis of absorption refrigeration machines,” Energy, 33, 890-907, 2008. [47] W. D. Seider, J. D. Seader, D. R. Lewin, Product and Process Design principles, Synthesis, Analysis and Evaluation, 2nd ed. New York: John Wiley & Sons, 2003. [48] C. Deniz, 2015, “Thermodynamic and Environmental Analysis of Low-Grade Waste Heat Recovery System for a Ship Power Plant,” Int. J. Energy Science, 5, 23-34. [49] STEAG. (2015). EBSILON®Professional (Version 11). Essen, Germany: STEAG Energy Services GmbH. [50] F. Petrakopoulou, G. Tsatsaronis & T. Morosuk, 2011, “Exergoeconomic Analysis of an Advanced Zero Emission Plant,” J. Engineering for Gas Turbines and Power, doi:10.1115/1.4003641. [51] H. Chen, D. Y. Goswami, E. K. Stefanakos, 2010, “A review of thermodynamic cycles and working fluids for the conversion of low-grade heat,” Ren. Sust. En. Rev., doi:10.1016/j.rser.2010.07.006. [52] U. Larsen, L. Pierobon, F. Haglind, C. Gabrielii, 2013, “Design and optimisation of organic Rankine cycles for waste heat recovery in marine applications using the principles of natural selection,” Energy, doi:10.1016/j.energy.2013.03.021. [53] A. S. Panesar, R. E. Morgan, N. D. D. Miché, M. R. Heikal, 2013, “Working fluid selection for a subcritical bottoming cycle applied to a high exhaust gas recirculation engine,” Energy, doi:10.1016/j.energy.2013.08.015. [54] N. F. Tumen Ozdil, M. R. Segmen, A. Tantekin, “Thermodynamic analysis of an Organic Rankine Cycle (ORC) based on industrial data,” 2015, Appl. Therm. Eng., doi:10.1016/j.applthermaleng.2015.07.079. [55] ASHRAE. (2013). Designation and Safety Classification of Refrigerants ANSI/ASHRAE Standard 34-2013. Retrieved from ashrae.org. [56] F. Petrakopoulou, G. Tsatsaronis, T. Morosuk, & A. Carassai, 2012, “Conventional and advanced exergetic analyses applied to a combined cycle power plant,” Energy, 41(1), 146-152. [57] B. Boundy, S. W. Diegel, L. Wright, & S. C. Davis, Biomass Energy Data Book: Edition 4: Oak Ridge National Laboratory, 2011. [58] P. Stephan, et al., VDI Heat Atlas (2 ed.). Berlin Heidelberg: Springer-Verlag Berlin Heidelberg, 2010. [59] F. Petrakopoulou, G. Tsatsaronis, & T. Morosuk, 2013, “Evaluation of a power plant with chemical looping combustion using an advanced exergoeconomic analysis,” Sustainable Energy Technologies and Assessments, doi:10.1016/j.seta.2013.05.001.