BibTex RIS Kaynak Göster

Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations

Yıl 2012, Cilt: 6 Sayı: 3, 69 - 75, 01.11.2012

Öz

In this study, a cutting head for a portable brush cutter was designed and for harvesting four Iranian rice varieties, two varieties of high yielding named Khazar and Fajr and two varieties from local varieties named Binam and Hashemi. Cutting head consisted of a circular saw blade with 24 cm diameter and 2 mm thickness. Designed blade had 136 teeth with 0° rake angle, 30° clearance angle and 6 mm pitch. A simple windrowing system made from aluminum sheet was designed and constructed. The cutting head installed on existent brush cutter and test was conducted in field conditions. For each type of variety, the cutting energy and critical blade speed was computed. Results indicated that compared to local rice varieties Maximum power consumption of about 1.132 kW was obtained for Khazar variety. Results also showed that rice losses of the portable reaper were lower than manual harvesting and field capacity of machine was 4.20 times greater than manual harvesting

Yıl 2012, Cilt: 6 Sayı: 3, 69 - 75, 01.11.2012

Öz

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA77NZ82DV
Bölüm Araştırma Makalesi
Yazarlar

Nesar Mohammadi Baneh Bu kişi benim

Hosein Navıd Bu kişi benim

Mohammad Reza Alızadeh Bu kişi benim

Hamid Reza Ghasem Zadeh Bu kişi benim

Yayımlanma Tarihi 1 Kasım 2012
Yayımlandığı Sayı Yıl 2012 Cilt: 6 Sayı: 3

Kaynak Göster

APA Baneh, N. M., Navıd, H., Alızadeh, M. R., Zadeh, H. R. G. (2012). Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations. Journal of Applied Biological Sciences, 6(3), 69-75.
AMA Baneh NM, Navıd H, Alızadeh MR, Zadeh HRG. Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations. J.appl.biol.sci. Kasım 2012;6(3):69-75.
Chicago Baneh, Nesar Mohammadi, Hosein Navıd, Mohammad Reza Alızadeh, ve Hamid Reza Ghasem Zadeh. “Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations”. Journal of Applied Biological Sciences 6, sy. 3 (Kasım 2012): 69-75.
EndNote Baneh NM, Navıd H, Alızadeh MR, Zadeh HRG (01 Kasım 2012) Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations. Journal of Applied Biological Sciences 6 3 69–75.
IEEE N. M. Baneh, H. Navıd, M. R. Alızadeh, ve H. R. G. Zadeh, “Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations”, J.appl.biol.sci., c. 6, sy. 3, ss. 69–75, 2012.
ISNAD Baneh, Nesar Mohammadi vd. “Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations”. Journal of Applied Biological Sciences 6/3 (Kasım 2012), 69-75.
JAMA Baneh NM, Navıd H, Alızadeh MR, Zadeh HRG. Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations. J.appl.biol.sci. 2012;6:69–75.
MLA Baneh, Nesar Mohammadi vd. “Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations”. Journal of Applied Biological Sciences, c. 6, sy. 3, 2012, ss. 69-75.
Vancouver Baneh NM, Navıd H, Alızadeh MR, Zadeh HRG. Design and Development of a Cutting Head for Portable Reaper Used in Rice Harvesting Operations. J.appl.biol.sci. 2012;6(3):69-75.