Low density hemp shive particleboards for latent thermal energy storage performance

Year 2021, Volume: 5 Issue: 1, 1 - 9, 31.03.2021

Edgars Kirilovs , Inga Zotova Silvija Kukle Kārlis Pugovičs

https://doi.org/10.30521/jes.805791

Cited By: 9

Abstract

Over the past few decades, climate change and the search for renewable energy sources have become hot topics within the research community. About 30% of the world's energy consumption is in the heating and cooling sector of residential buildings. Such materials can reduce the temperature variations, leading to an improvement in human comfort and decreasing at the same time the energy consumption of buildings. This paper assesses the integration of a microencapsulated phase change material (PCMs) with organic composite phase change as the core material and melamine-formaldehyde as the shell in hemp shive intended for building indoor wallboard. Paraffin waxes are cost-effective and have moderate thermal energy storage density but low thermal conductivity and, hence, require large surface area. Commercial manufactured organic PCM-S28 with a 25-29°C melting point received from MikroCaps Ltd. (Slovenia) has been used. The experimental boards were made using cold pressing technology and with 10% Kleiberit Urea Formaldehyde resin (UF) glue as a binding agent. The experimental boards were made 25 mm thick with a density of 310 ± 20 kg/m3 that qualify them as low-density boards. By adding 5% nanocapsules during the board manufacturing process, the heat capacity is increased by 28%.

Keywords

Energy storage, Hemp shive, Phase change materials, Phase transition heat, Specific heat capacity

Supporting Institution

This work has been supported by the European Regional Development Fund within the Activity 1.1.1.2 “Post-doctoral Research Aid” of the Specific Aid Objective 1.1.1 “To increase the research and innovative capacity of scientific institutions of Latvia and the ability to attract external financing, investing in human resources and infrastructure” of the Operational Programme “Growth and Employment”

Project Number

1.1.1.2/VIAA/1/16/152

References

• [1] Pacheco-Torgal F. Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020. Construction and Building Materials 2014, 51-162.
• [2] Moreno B., Gonzalo FDA., Ferrandiz JA., Lauret B., Hernandez JA. A building energy simulation methodology to validate energy balance and comfort in zero energy buildings. Journal of Energy Systems 2019; 3: 168-182, DOI: 10.30521/jes.623285
• [3] Cuce E. Impacts of edge seal material on thermal insulation performance of a thermally resistive photovoltaic glazing: CFD research with experimental validation. Journal of Energy Systems 2019; 3: 26-35, DOI: 10.30521/jes.499794
• [4] Wazna M E., Gounni A., Bouari AE., Alami ME., Cherkaoui O. Development, characterization and thermal performance of insulating nonwoven fabrics made from textile waste. Journal of Industrial Textiles 2018; 48: 1167-1183. DOI: 10.1177/1528083718757526
• [5] Cuce E., Cuce PM., Besir AB. Improving thermal resistance of lightweight concrete hollow bricks: A numerical optimisation research for a typical masonry unit. Journal of Energy Systems 2020; 4(3), 121-144. DOI: 10.30521/jes.775961
• [6] Murphy DPL, Behring H, Wieland H. The use of flax and hemp materials for insulating. Proceedings of flax and other bast plants symposium 1997. 79–84.
• [7] Kymalainen H. R., Sjoberg A.M. Flax and hemp fibres as raw materials for thermal insulations. Building and Environment 2008; 43: 1261–1269, DOI: 10.1016/j.buildenv.2007.03.006
• [8] Kosan M., Akkoc A.E., Disili E., Aktas M. Design of an innovative PV/T and heat pump system for greenhouse heating. Journal of Energy Systems 2020; 4: 58-70, DOI: 10.30521/jes.740587
• [9] Lühr C., Pecenka R., Gusovius H.-J. Production of high-quality hemp shives with a new cleaning system. Agronomy Research 2015; 13(1): 130-140.
• [10] Lühr C., Pecenka R., Budde J., Hoffmann T., Gusovius H-J. Comparative investigations of fiberboards resulting from selected hemp varieties. Industrial Crops & Products 2018; 118: 81- 94. DOI: 10.1016/j.indcrop.2018.03.031
• [11] Pecenka R., Fūrll C., Idler C., Grundmann P., Radosavljevic L. Fibre boards and composites from wet preserved hemp. Materials and Product Technology 2009; 36: 208-220.
• [12] Ivanovs S., Rucins A., Valainis O., Belakova D., Kirilovs E., Vidzickis R. Research of technological process of hemp slab production, Engineering for rural development 2015, 202-209.
• [13] Rofie S. Novel Low Density Particleboard from Hemp Shives, Doctoral Thesis. University of Wales, 2005.
• [14] Lee S., Shupe T.F., Hse C.Y. Mechanical and physical properties of agro-based fiberboard. European Journal of Wood and Wood Products 2006. 74-79. ISSN 0018-3768.
• [15] Zalba B., Marin J., Cabeza L.F., Mehling H. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications. Applied Thermal Engineering 2003; 23: 251–283.
• [16] Subramanian E. Integrating phase change materials in building materials: Experimentation, characterization and numerical simulation, Doctoral Thesis. Clemson University, 2011.
• [17] Kuznik F., David D., Johannes K., Roux J-J. A review on phase change materials integrated in building walls. Renewable and Sustainable Energy Reviews 2011; 15 (1): 379-391, DOI: 10.1016/j.rser.2010.08.019
• [18] Hawes D.W., Feldman D., Banu D. Latent heat storage in building materials. Energy and Buildings 1993; 20(1):77-86, DOI: 10.1016/0378-7788(93)90040-2
• [19] Han X., Li Y., Yuan L., Wang Q, Zhang H., Lian H., Zhang G., & Xiao L. Experimental study on effect of microencapsulated phase change coating on indoor temperature response and energy consumption. Advances in Mechanical Engineering 2017; 9(6): 1-8, DOI: 10.1177/168781401770390
• [20] Rao Z., Wang S., Zhang Z. Energy saving latent heat storage and environmental friendly humidity-controlled materials for indoor climate. Renewable and Sustainable Energy Reviews 2012; 16: 3136– 3145. DOI: 10.1016/j.rser.2012.01.053
• [21] Memon S. Phase change material sintegrated in building walls: A state of the art review. Renewable and Sustainable Energy Reviews 2014; 31: 870–906, DOI: 10.1016/j.rser.2013.12.042
• [22] Al-Absi Z.A., Mohd Isa M.H., Ismail M. Phase Change Materials (PCMs) and Their Optimum Position in Building Walls. MDPI Sustainability 2020; 12(4): 1-25, DOI: 10.3390/su12041294
• [23] Sun X., Jovanovic J., Zhang Y., Fan S., Chu Y., Mo Y., Liao S. Use of encapsulated phase change materials in lightweight building walls for annual thermal regulation. Energy 2019; 180: 858-872, DOI: 10.1016/j.energy.2019.05.112
• [24] Santos-Herrero, J.M., Lopez-Guede, J.M., Flores, I., A Short review on the use of renewable energies and model predictive control in buildings, Journal of Energy Systems 2017; 1(3): 112-120 DOI: 10.30521/jes.346653
• [25] LVS EN 322:1993. Wood-based panels - Determination of moisture content.
• [26] LVS EN 933-1:2012. Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method.
• [27] Zarei A. Characterization of szego-milled hemp fibres. [Doctoral Thesis], University of Toronto, 2010.
• [28] LVS EN 323:2000. Wood-based panels - Determination of density.
• [29] LVS ISO 8302: 2001. Thermal insulation - Determination of steady-state thermal resistance and related properties-Guarded Hot Plate apparatus.
• [30] Gendelis S., Jakovičs A., Engelhardt M., Thermal and moisture adsorption/desorption properties for a selection of vegetal insulation materials. 4th Central European Symposium on Building Physics, MATEC Web Conference 2019. 1-5.
• [31] Kozlowski R., Wladyka-Przybylak M. Uses of natural fiber reinforced plastics. In: Wallenberger F.T and Weston N. Natural fibres, plastics and composites. Springler, 2004; 249-262.
• [32] Pfundstein M., Gellert R., Spitzner M., Rudolphi A. Insulating Materials: Principles, Materials, Applications. Regensburg: Auműller Druck, 2008.
• [33] Lekavicius V., Shipkovs P., Ivanovs S., Rucins A. Thermo-Insulation Properties Of Hemp-Based Products. Latvian Journal of Physics and Technical Sciences 2015; 52: 38-51, DOI: 10.1515/lpts-2015-0004