EFFECT OF MISSING PATH AND FORCE ON VIBRATION RESPONSE PREDICTION

Yıl 2016, Cilt: 12 Sayı: 1, 80 - 89, 24.04.2016

Hakan Uçar

Öz

Accurate
prediction of the vibration responses is an essential requirement during the
design and optimization stages of mechanical structures. For this reason, a
vibration response prediction (VRP) methodology, based on a set of frequency
response functions (FRF) and operational responses, is established. In this
methodology, defining the sources and transmission paths of the structure
accurately is critical. Since it is based on the FRFs of the system,
unconsidered sources and/or missing path result in inaccurate predictions. The
goal of this paper is to present the effect of a missing path on the prediction
results. In accordance with this purpose, a three degree-of-freedom system will
be investigated analytically and VRP methodology will be applied along with the
calculated receptances and displacements of the system.

Anahtar Kelimeler

vibration response, matrix inversion, cross-coupling, 3 DOF systems

Kaynakça

• Verheij, J. W., (1982), Multipath Sound Transfer from Resiliently Mounted Shipboard Machinery, TNO, Delft, Netherlands
• Hillary, B., (1983), Indirect Measurement Of Vibration Excitation Forces, PhD Thesis, Imperial College London, Dynamics Section, London.
• Desanghere, G., Identification of external forces based on frequency response measurements, Proc. 8th Int. Seminar on Modal Analysis, Leuven, Belgium, 1983.
• Janssens, M. H. A., Verheij, J. W., and Thompson, D. J., (1999), The use of an equivalent forces method for the experimental quantification of structural sound transmission in ships, Journal of Sound and Vibration, 226(2), pp. 305-328
• Ribeiro, A. M. R., Silva, J. M. M., and Maia, N. M. M., (2000), On the generalisation of the transmissibility concept, Mechanical Systems and Signal Processing, 14(1), pp. 29-35.
• Maia, N. M. M., Silva, J. M. M., and Ribeiro, A. M. R., (2001), The transmissibility concept in multi-degree-of-freedom systems, Mechanical Systems and Signal Processing, 15(1), pp. 129-137.
• Ribeiro, A. M. R., Fontul, M., Maia, N. M. M., and Silva, J. M. M., Further developments on the transmissibility concept for multiple degree of freedom systems, Proceedings of the XIth International Conference on Vibration Engineering, Timisoara, Romania, 2005.
• Gajdatsy, P., Janssens, K., Desmet, W., and Van der Auweraer, H., (2010), Application of the transmissibility concept in transfer path analysis, Mechanical Systems and Signal Processing, 24(7), pp. 1963-1976.
• Roesems, D., Analysis of structure borne noise transmission paths, Proc. 6th Int. Seminar on Modal Analysis, Leuven, Belgium , 1981.
• Verheij, J. W., Experimental procedures for quantifying sound paths to the interior of road vehicles, Proc. 2nd Int. Conference on Vehicle Comfort, pp. 483-491, Bologna, Italy, 1992.
• Efunda, Multiple degree - of - freedom, 2015.