Design Studio Insights: Anthropometric Considerations for Ergonomic Design of Wet Services

Yıl 2023, , 73 - 84, 20.07.2023

Sudipti Biswas

https://doi.org/10.46474/jds.1292295

Öz

Ergonomics is a vital consideration for space design. In architecture education, ergonomics is usually taught in the design studio with various learning methods such as lecture, demonstration, survey, design exercise etc. This article presents an anthropometric study through a design studio exercise dedicated to learning ergonomic considerations. It presents an anthropometric dataset prepared within the studio exercise for designing lavatory and kitchen spaces. In Bangladesh, there is a scarcity of anthropometric data useful for architecture, therefore some reference standards are consulted in the academic and practical field of architecture to integrate ergonomics in design. The presented dataset can serve as a source data for this purpose. Analysis of the derived dataset also raises questions about the suitability of the commonly practiced reference standards.

Anahtar Kelimeler

Ergonomics, Design studio, Architecture, Anthropometry, Reference standards

Destekleyen Kurum

Military Institute of Science and Technology

Proje Numarası

NA

Teşekkür

The author is grateful to Chowdhury Ali Imam and Dristi Chakma who were involved in the studio, all the students a participating in the course, and to the survey participants.

Kaynakça

• Akhter, Z., Begum, J. A., Banu, M. L. A., Alam, M. M., Hossain, S., Amin, N. F., Uddin, M. M., & Yasmin, Q. S. (2010). Stature Estimation Using Head Measurements in Bangladeshi Garo Adult Females. Bangladesh Journal of Anatomy, 7(2), 101–104. https://doi.org/10.3329/bja.v7i2.6096
• Asadujjaman, M., Rashid, M. H. O., & Rana, S. (2019). Anthropometric Measurement of External Ear and Correlation with Age in North Regional People of Bangladesh. Bangladesh Journal of Medical Science, 18(2), 206–210. https://doi.org/10.3329/bjms.v18i2.40686
• Attaianese, E. (2012). A broader consideration of human factor to enhance sustainable building design. Work, 41, 2155–2159. https://doi.org/10.3233/WOR-2012-1020-2155
• Attaianese, E. (2017). Ergonomics of Built Environment i.e. How Environmental Design Can Improve Human Performance and Well—Being in a Framework of Sustainability. Ergonomics International Journal, s1. https://doi.org/10.23880/EOIJ-16000S
• Attaianese, E., & Duca, G. (2012). Human factors and ergonomic principles in building design for life and work activities: An applied methodology. Theoretical Issues in Ergonomics Science, 13(2), 187–202. https://doi.org/10.1080/1463922X.2010.504286
• Biswas, S. (2022). Teaching Ergonomics in the Online Studio. Journal of Design Studio, 4(2), 237–247. https://doi.org/10.46474/jds.1183490 https://doi.org/10.46474/jds.1183490
• Biswas, S., Kundu, G., & Imam, C. A. (2021). Learning Human Factors/Ergonomics (HFE) in Architectural Education: A Study of Studio Approach in Bangladesh. Creative Space, 9(1), 29–41. https://doi.org/10.15415/cs.2021.91003
• Chakraborty, R. K., Asadujjaman, M., & Nuruzzaman, M. (2014). Fuzzy and AHP approaches for designing a hospital bed: A case study in Bangladesh. International Journal of Industrial and Systems Engineering, 17(3), 315–328.
• Charytonowicz, J. (n.d.). Architecture and Ergonomics. 4.
• Costa, A. P. L., Campos, F., & Villarouco, V. (2012). Overview of ergonomics built environment. Work, 41, 4142–4148. https://doi.org/10.3233/WOR-2012-0710-4142
• De Chiara, J., & Callender, J. H. (1990). Time Saver Standards for Building Types (3rd ed.). McGraw-Hill.
• Eilouti, B. (2021). A Framework for Integrating Ergonomics Into Architectural Design. Ergonomics in Design: The Quarterly of Human Factors Applications, 106480462098367. https://doi.org/10.1177/1064804620983672
• Flora, M. S., Mascie-Taylor, C., & Rahman, M. (2009). Conicity Index of Adult Bangladeshi Population and their Socio-Demographic Characteristics. Ibrahim Medical College Journal, 3(1), 1–8. https://doi.org/10.3329/imcj.v3i1.2910
• Fross, K. (2014). Ergonomics in the Practice of Project Architect on Selected Examples. In M. Kurosu (Ed.), Human-Computer Interaction. Theories, Methods, and Tools (Vol. 8510, pp. 77–85). Springer International Publishing. https://doi.org/10.1007/978-3-319-07233-3_8
• Garneau, C. J., & Parkinson, M. B. (2016). A survey of anthropometry and physical accommodation in ergonomics curricula. Ergonomics, 59(1), 143–154. https://doi.org/10.1080/00140139.2015.1052853
• GoB. (2020). Bangladesh National Building Code, BNBC. Government of the People’s Republic of Bangladesh. http://www.dpp.gov.bd/upload_file/gazettes/39201_96302.pdf
• Hendrick, H. W. (2008). Applying ergonomics to systems: Some documented “lessons learned.” Applied Ergonomics, 39(4), 418–426. https://doi.org/10.1016/j.apergo.2008.02.006
• Hoque, A. S. M., Parvez, M. S., Halder, P. K., & Szecsi, T. (2014). Ergonomic design of classroom furniture for university students of Bangladesh. Journal of Industrial and Production Engineering, 31(5), 239–252.
• Hossain, Z. (2015). Estimation of hand anthropometry among Bangladesh adults living in four different areas [PhD Thesis]. Bangladesh Health Professions Institute (The academic institute of CRP ….
• Imrhan, S. N., Sarder, M. D., & Mandahawi, N. (2009). Hand anthropometry in Bangladeshis living in America and comparisons with other populations. Ergonomics, 52(8), 987–998. https://doi.org/10.1080/00140130902792478
• International Ergonomics Association. (2000). What Is Ergonomics (HFE)? https://iea.cc/what-is-ergonomics/
• Islam, M. A., Asadujjaman, M., Nuruzzaman, M., & Mosharraf, M. (2013). Ergonomics consideration for hospital bed design: A case study in Bangladesh. Ergonomics, 1(1).
• Khadem, M. M., & Islam, Md. A. (2014). Development of anthropometric data for Bangladeshi male population. International Journal of Industrial Ergonomics, 44(3), 407–412. https://doi.org/10.1016/j.ergon.2014.01.007
• Klamklay, J., Sungkhapong, A., Yodpijit, N., & E. Patterson, P. (2008). Anthropometry of the southern Thai population. International Journal of Industrial Ergonomics, 38(1), 111–118. https://doi.org/10.1016/j.ergon.2007.09.001
• Ministry of Housing and Public Works. (2008). ইমারত র্নিমাণ বিধিমালা ২০০৮ (Dhaka Metropolitan Building Construction Rules, 2008). Ministry of Housing and Public Works.
• Mokdad, M. (2002). Anthropometric study of Algerian farmers. International Journal of Industrial Ergonomics, 29(6), 331–341.
• Moody, L. (2011). A studio-based approach to teaching ergonomics and human factors. Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 55(1), 545–549.
• Neufert, E., & Neufert, P. (2012). Neufert Architects’ data. John Wiley & Sons.
• Olguntürk, N., & Demirkan, H. (2009). Ergonomics And Universal Design In Interior Architecture Education. METU Journal of the Faculty of Architecture, 26(2), 123–138. https://doi.org/10.4305/METU.JFA.2009.2.7
• Panero, J., & Zelnik, M. (1979). Human Dimension & interior Space: A Source Book of Design Reference Standards. Watson-Guptill.
• Parvez, M. S., Shahriar, M. M., Tasnim, N., & Hoque, A. S. M. (2022). An anthropometry survey of Bangladeshi university students. Journal of Industrial and Production Engineering, 39(2), 89–108.
• Parvez, M. S., Tasnim, N., Talapatra, S., Kamal, T., & Murshed, M. (2021). Are library furniture dimensions appropriate for anthropometric measurements of university students? Journal of Industrial and Production Engineering, 1–16.
• Parvez, M., Talapatra, S., Tasnim, N., Kamal, T., & Murshed, M. (2022). Anthropomorphic Investigation into Improved Furniture Fabrication and Fitting for Students in a Bangladeshi University. Journal of The Institution of Engineers (India): Series C, 103(4), 613–622.
• Parvez, S., Tasnim, N., Talapatra, S., Ruhani, A., & Hoque, A. S. M. (2022). Assessment of Musculoskeletal Problems among Bangladeshi University Students in Relation to Classroom and Library Furniture. Journal of The Institution of Engineers (India): Series C, 103(3), 279–292.
• Pentikis, J., Lopez, M. S., & Thomas, R. E. (2002). Ergonomics evaluation of a government office building. Work, 18(2), 123–131.
• Pheasant, S., & Haslegrave, C. M. (2018). Bodyspace: Anthropometry, ergonomics and the design of work. CRC press.
• Radjiyev, A., Qiu, H., Xiong, S., & Nam, K. (2015). Ergonomics and sustainable development in the past two decades (1992–2011): Research trends and how ergonomics can contribute to sustainable development. Applied Ergonomics, 46, 67–75. https://doi.org/10.1016/j.apergo.2014.07.006
• Sanders, M. S., & McCormick, E. J. (1993). Human Factors in Engineering and Design (7th ed.). McGraw Hill, Inc.
• Shah, R. M., Bhuiyan, M. A. U., Debnath, R., Iqbal, M., & Shamsuzzoha, A. (2013). Ergonomics Issues in Furniture Design: A Case of a Tabloid Chair Design. In A. Azevedo (Ed.), Advances in Sustainable and Competitive Manufacturing Systems (pp. 91–103). Springer International Publishing. https://doi.org/10.1007/978-3-319-00557-7_8
• Shahriar, M. M., Parvez, M. S., & Lutfi, M. (2020). A survey of hand anthropometry of Bangladeshi agricultural farm workers. International Journal of Industrial Ergonomics, 78, 102978. https://doi.org/10.1016/j.ergon.2020.102978
• Tania, I. J., Zaman, F., Morium, U., Akter, M., & Rashid, S. (2020). Anthropometric Study of Facial Height among Tribal (Garo) and Non-Tribal Bangladeshi Female of Greater Mymensingh District in Bangladesh. Journal of Current and Advance Medical Research, 7(1), 36–39.
• Villeneuve, J. (2000). The Contribution of Ergonomics to the Design of Hospital Architecture. Proceedings of the Human Factors and Ergonomics Society Annual Meeting, 44(26), 189–196. https://doi.org/10.1177/154193120004402615