Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2021, Sayı: 047, 68 - 79, 31.12.2021

Öz

Destekleyen Kurum

İlgili Değil

Proje Numarası

İlgili Değil

Teşekkür

İlgili Değil

Kaynakça

  • [1] Wonderly, C., Grenestedt, J., Fernlund, G. and Cepus, E.,(2005), Compos. Part B-Eng., 36(5), 417-426
  • [2] Cohades, A., Branfoot, C., Rae, S., Bond, I. and Michaud, V., (2018), Adv. Mater. Interfaces, 5(17), 1800177
  • [3] Meng, M., Chua, Y.J., Wouterson, E. and Ong, C.P.K., (2017), Neurocomputing, 257, 128-135
  • [4] Sanjay, M.R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S. and Pradeep, S., (2018), J. Clean Prod., 172, 566-581
  • [5] Sprenger, S., (2015), J. Compos. Mater., 49(1), 53-63
  • [6] Bush, M.A., Bush, P.J. and Miller, R.G., (2006), J. Forensic Sci., 51(3), 636-642
  • [7] Nissila, T., Hietala, M. and Oksman, K., (2019), Compos. Part A-Appl. S., 125, 105515
  • [8] Reis, A.K.D., Monticelli, F.M., Neves, R.M., de Paula Santos, L.F., Botelho, E.C. and Luis H., (2020), Ornaghi Jr, J. Compos. Mater., 54(27), 4121-4131
  • [9] Şahin, Y., (2006)Introduction to composite materials (In Turkish), Seçkin Publishing, Ankara
  • [10] Elarabi S.M. and Weidong, Y., (2005), J. Ind. Text., 35, 39-45
  • [11] Murugan, R., Ramesh, R. and Padmanabhan, K., (2014), Procedia Eng., 97, 459-468
  • [12] Botelho E.C. and Rezende, M.C., (2006), Polym-Plast. Technol., 45, 61-69
  • [13] Yağmur, S., Kurt, A. and Şeker, U., (2018), Gazi Univ. J. Sci. Part C: Design Tech., 6(3), 705- 714
  • [14] Yetgin, S. H., Ünal, H. and Hatipoğlu, G., (2016), Düzce Univ. S. Tech., 4(1), 167-175
  • [15] Zhang, X., Fan, X., Yan, C., Li, H., Zhu, Y., Li, X. and Yu, L., (2012), ACS Appl. Mater. Inter., 4(3), 1543-1552
  • [16] Das, T.K., Ghosh, P. and Das, N.C., (2019), Adv. Compos. Hybrid Mater., 1-20
  • [17] Eray, S., (2020), In: Metal Oxide Powder Technologies, , Elsevier, Amsterdam, 101-119
  • [18] Shin, S.E., Ko, Y.J. and Bae, D., (2016), Compos. Part B-Eng., 106, 66-73
  • [19] Xu, Z., Zhang, Y., Zhou, J., Qi, M., Shi, J. and Zhang, J., (2020), J. Appl. Polym. Sci., 137(42), 49302
  • [20] Djordjevic, I., Sekulic, D.P. and Stevanovic, M., (2007), J. Reinf. Plast. Comp., 26, 1193-1199
  • [21] Karataş M.A. and Gökkaya, H., (2018), Defence Tech., 14(4), 318-326
  • [22] Karslı N.G. and Aytac, A., (2013), Compos. Part B-Eng., 51, 270-275
  • [23] Dong, F., Hou, G., Cao, F., Yan, F., Liu, L. and Wang, J., (2016), Tribol Int., 101, 291–300
  • [24] Engin, K., Koyuncu, T. and Lüle, F., (2015), Anadolu J. Agricult. Sci., 30(1), 43-50
  • [25] Henerichs, M., Voss, R., Kuster, F. and Wegener, K., (2015), CIRP J. Manuf. Sci. Tech., 9, 136- 145
  • [26] Song, H., (2015), Compos. Part B-Eng., 79, 61-66
  • [27] Akbar, İ. and Liew, K.M., (2020), J. Clean. Prod., 274, 123001
  • [28] Demir, M.E., Çelik, Y.H. and Kılıçkap, E., (2019), J. Polytech., 22(4), 811-817
  • [29] Knoblauch R. and Geddes C.D., (2020), CD, Materials, 13(18), 4004
  • [30] Yue Z. and Economy. J., (2017), Woodhead Publishing, Sawston, 61-131,
  • [31] Güneş. D., (2019), Master Thesis. Kütahya Dumlupınar University, Kütahya,
  • [32] Baral, N., Guezenoc, H., Davies, P. and Baley, C., (2008), Mater. Lett., 62, 1096–1099
  • [33] Bergmann, T., Heimbs, S., and Maier, M., (2015), Compos. Struct., 125, 362-373
  • [34] Shi, Y., Swait, T. and Soutis, C., (2012), Compos. Struct., 94(9), 2902-2913
  • [35] Arslan, G., Fidan, S. and Sınmazçelik, T., (2018), El-Cezeri J. Sci. Eng., 5(1), 182-190

INVESTIGATION of MECHANICAL PROPERTIES of CARBON FIBRE REINFORCED POLYESTER MATRIX COMPOSITE

Yıl 2021, Sayı: 047, 68 - 79, 31.12.2021

Öz

This study aimed to administer hand lay-up method for designing composite materials in which unidirectional and biaxial carbon fiber reinforcements are placed in a polyester matrix to generate one, two and three layers at room temperature. The samples were laid up from composite plates with the help of a mold in accordance with the fiber direction angle in accordance with the standards. In order to determine the mechanical properties of the samples, tensile, bending and drop weight low velocity impact tests were performed. The tensile test results in composite materials with the same layer number, pointed out that 00 unidirectional fiber reinforced composite materials performed the highest tensile strength values. On the other hand, the biaxial carbon fiber reinforced composite materials had the highest elasticity values of ±450. The highest elasticity values have been found in the unidirectional carbon fiber reinforcements of composite materials with 00 fiber direction angle in terms of bending test results. The biaxial composite materials with a ±450 fiber direction angle showed the highest values of impact tensile strength in drop weight low velocity impact tests. 00 unidirectional fiber reinforced composite materials, which showed the highest elasticity values in tensile and bending tests, were found to be the composite materials with the highest deformation values in the falling weight low velocity impact tests. It appears that increasing the number of layers caused an increase in the impact strength. They can be an alternative to aluminum and glass fiber reinforced polyester matrix composite materials due to their lightness and strength at the same thickness, which is valuable in boats, caravans and design cars.

Proje Numarası

İlgili Değil

Kaynakça

  • [1] Wonderly, C., Grenestedt, J., Fernlund, G. and Cepus, E.,(2005), Compos. Part B-Eng., 36(5), 417-426
  • [2] Cohades, A., Branfoot, C., Rae, S., Bond, I. and Michaud, V., (2018), Adv. Mater. Interfaces, 5(17), 1800177
  • [3] Meng, M., Chua, Y.J., Wouterson, E. and Ong, C.P.K., (2017), Neurocomputing, 257, 128-135
  • [4] Sanjay, M.R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S. and Pradeep, S., (2018), J. Clean Prod., 172, 566-581
  • [5] Sprenger, S., (2015), J. Compos. Mater., 49(1), 53-63
  • [6] Bush, M.A., Bush, P.J. and Miller, R.G., (2006), J. Forensic Sci., 51(3), 636-642
  • [7] Nissila, T., Hietala, M. and Oksman, K., (2019), Compos. Part A-Appl. S., 125, 105515
  • [8] Reis, A.K.D., Monticelli, F.M., Neves, R.M., de Paula Santos, L.F., Botelho, E.C. and Luis H., (2020), Ornaghi Jr, J. Compos. Mater., 54(27), 4121-4131
  • [9] Şahin, Y., (2006)Introduction to composite materials (In Turkish), Seçkin Publishing, Ankara
  • [10] Elarabi S.M. and Weidong, Y., (2005), J. Ind. Text., 35, 39-45
  • [11] Murugan, R., Ramesh, R. and Padmanabhan, K., (2014), Procedia Eng., 97, 459-468
  • [12] Botelho E.C. and Rezende, M.C., (2006), Polym-Plast. Technol., 45, 61-69
  • [13] Yağmur, S., Kurt, A. and Şeker, U., (2018), Gazi Univ. J. Sci. Part C: Design Tech., 6(3), 705- 714
  • [14] Yetgin, S. H., Ünal, H. and Hatipoğlu, G., (2016), Düzce Univ. S. Tech., 4(1), 167-175
  • [15] Zhang, X., Fan, X., Yan, C., Li, H., Zhu, Y., Li, X. and Yu, L., (2012), ACS Appl. Mater. Inter., 4(3), 1543-1552
  • [16] Das, T.K., Ghosh, P. and Das, N.C., (2019), Adv. Compos. Hybrid Mater., 1-20
  • [17] Eray, S., (2020), In: Metal Oxide Powder Technologies, , Elsevier, Amsterdam, 101-119
  • [18] Shin, S.E., Ko, Y.J. and Bae, D., (2016), Compos. Part B-Eng., 106, 66-73
  • [19] Xu, Z., Zhang, Y., Zhou, J., Qi, M., Shi, J. and Zhang, J., (2020), J. Appl. Polym. Sci., 137(42), 49302
  • [20] Djordjevic, I., Sekulic, D.P. and Stevanovic, M., (2007), J. Reinf. Plast. Comp., 26, 1193-1199
  • [21] Karataş M.A. and Gökkaya, H., (2018), Defence Tech., 14(4), 318-326
  • [22] Karslı N.G. and Aytac, A., (2013), Compos. Part B-Eng., 51, 270-275
  • [23] Dong, F., Hou, G., Cao, F., Yan, F., Liu, L. and Wang, J., (2016), Tribol Int., 101, 291–300
  • [24] Engin, K., Koyuncu, T. and Lüle, F., (2015), Anadolu J. Agricult. Sci., 30(1), 43-50
  • [25] Henerichs, M., Voss, R., Kuster, F. and Wegener, K., (2015), CIRP J. Manuf. Sci. Tech., 9, 136- 145
  • [26] Song, H., (2015), Compos. Part B-Eng., 79, 61-66
  • [27] Akbar, İ. and Liew, K.M., (2020), J. Clean. Prod., 274, 123001
  • [28] Demir, M.E., Çelik, Y.H. and Kılıçkap, E., (2019), J. Polytech., 22(4), 811-817
  • [29] Knoblauch R. and Geddes C.D., (2020), CD, Materials, 13(18), 4004
  • [30] Yue Z. and Economy. J., (2017), Woodhead Publishing, Sawston, 61-131,
  • [31] Güneş. D., (2019), Master Thesis. Kütahya Dumlupınar University, Kütahya,
  • [32] Baral, N., Guezenoc, H., Davies, P. and Baley, C., (2008), Mater. Lett., 62, 1096–1099
  • [33] Bergmann, T., Heimbs, S., and Maier, M., (2015), Compos. Struct., 125, 362-373
  • [34] Shi, Y., Swait, T. and Soutis, C., (2012), Compos. Struct., 94(9), 2902-2913
  • [35] Arslan, G., Fidan, S. and Sınmazçelik, T., (2018), El-Cezeri J. Sci. Eng., 5(1), 182-190
Toplam 35 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Research Articles
Yazarlar

Deniz Güneş 0000-0003-0056-3789

Murat Çanlı 0000-0002-5275-861X

Levent Urtekin 0000-0003-4348-4749

Proje Numarası İlgili Değil
Yayımlanma Tarihi 31 Aralık 2021
Gönderilme Tarihi 4 Ağustos 2021
Yayımlandığı Sayı Yıl 2021 Sayı: 047

Kaynak Göster

IEEE D. Güneş, M. Çanlı, ve L. Urtekin, “INVESTIGATION of MECHANICAL PROPERTIES of CARBON FIBRE REINFORCED POLYESTER MATRIX COMPOSITE”, JSR-A, sy. 047, ss. 68–79, Aralık 2021.