Modelling and Optimization of Burr Height in Fiber Laser Drilling of Ferritic Stainless Steel

Yıl 2020, Cilt: 1 Sayı: 2, 32 - 39, 26.08.2020

Hüseyin Uzun Tolga Meral , Mustafa Günay

Öz

Laser drilling is the nontraditional machining methods that provides the machining of sheet metal parts with high precision and complex geometry. In laser drilling, the main parameters such as the focal point, gas pressure and feed rate directly affecting the cutting process play important role on the quality characteristics of the part. These parameters significantly influence the main machining outputs or responses such as burr formation and hole quality as well as the machining productivity. Thus, it is important to determine the ideal machining parameters during laser drilling, especially in terms of minimum burr formation. In this study, burr formation during laser drilling of ferritic stainless steel was analyzed in detail and mathematical model of burr height (Bh) was developed. Drilling operations were performed at three different focal point, gas pressure and feed rate. According to the experimental results, the smallest Bh value was obtained with focal point of -5, feed rate of 1200 mm/min and gas pressure of 12 bar. Based on analysis of variance, the most important parameter for burr height was found as the feed speed with 38.71%. The cutting parameters, statistically, were evaluated for the burr height. The R2 value of Bh model obtained by response surface method indicated a robust relationship in high level between the machining parameters and response.

Anahtar Kelimeler

Laser drilling, Stainless steel, Burr height, Mathematical model

Kaynakça

• 1. A.M. Pak, M. Moradi, Hole geometry features analysis in fiber laser percussion drilling process, International Journal of Advances in Mechanical and Automobile Engineering, 2(1): 18-21, 2015.
• 2. B.S. Yilbas, Laser Drilling Practical Applications, Springer, Berlin, 2013.
• 3. K. Jarosz, P. Löschner, P. Nieslony, Effect of cutting speed surface quality and heat-affected zone in laser cutting of 316L stainless steel, International Conference on Manufacturing Engineering and Materials, 6-10 June 2016, NovýSmokovec.
• 4. M. Taskin, U. Caligulu, The effect on the joining of welding power on the laser welding of couple steels AISI 430/1010, Firat University Journal of Engineering Science, 21(1): 11-22, 2009.
• 5. N. Fujita, K. Ohmura, A. Yamamoto, Changes of microstructures and high temperature properties during high temperature service of Niobium added ferritic stainless steels. Material Science and Engineering A, 351(1-2): 272-281, 2003.
• 6. J.C. Aurich, D. Dornfeld, P.J. Arrazola, V. Franke, L. Leitz, S. Min., Burrs-Analysis, control and removal, CIRP Annals, 58(2): 519-542, 2009.
• 7. H. Ozaki, Y. Koike, H. Kawakami, J. Suzuki, Cutting properties of austenitic stainless steel by using laser cutting process without assist gas, Hindawi Publishing Corporation Advances in Optical Technologies, 1-8, 2012.
• 8. D.J. Kotodiya, D.H. Pandya, Parametric analysis of laser machining with response surface method on SS-304, Procedia Technology, 23:376-382, 2016.
• 9. C. Wandera, V. Kujanpaa Optimization of parameters for fibre laser cutting of a 10 mm stainless steel plate, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225:641-649, 2011.
• 10. S. Chatterjee, K. Abhishek, S.S. Mahapatra, Study on surface quality of laser drilled holes: parametric optimization using harmony search algorithm, International Journal of Materials, Mechanics and Manufacturing, 5(4): 251-254 2017.
• 11. J. Petru, T. Zlamal, R. Cep, K. Monkova, P. Monka, Influence of cutting parameters on heat-affected zone after laser cutting, Tehnicki Vjesnik, 20(2): 225-230, 2013.
• 12. M. Moradi, E. Golchin, Investigation on the effects of process parameters on laser percussion drilling using finite element methodology; statistical modelling and optimization, Latin American Journal of Solids and Structures, 14: 464-484, 2017.
• 13. Y.R. Satpute, K.H. Inamdar, An investigation of CO2 laser drilling, Journal of Emerging Technologies and Innovative Research, 6(3): 124-128, 2016.
• 14. C. Yüce, Paslanmaz çelik malzemelerin fiber lazer kesiminde proses parametrelerinin optimizasyonu, Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 24(2): 685-696, 2019.
• 15. H. Uzun, Paslanmaz çeliğin fiber lazerle kesilmesinde işleme parametrelerinin optimizasyonu, Yüksek Lisans Tezi, Karabük Üniversitesi Fen Bilimleri Enstitüsü, Karabük, Türkiye, 2019.
• 16. W. Duan, K. Wang, X. Dong, X. Mei, W. Wang, Z. Fan, Experimental characterizations of burr deposition in Nd: YAG laser drilling: a parametric study, International Journal of Advanced Manufacturing Technology, 76:1529-1542, 2014.
• 17. R.H. Myers, D.C. Montgomery, C.M. Anderson-Cook, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, 4th ed. John Wiley & Sons, Inc., New York, 2016.