MOBILE PHONE-BASED PHOTOGRAMMETRY FOR 3D MODELING OF SHIP HULLS

Yıl 2021, Cilt: 3 Sayı: 1, 9 - 16, 30.06.2021

Engin Kanun , Murat Yakar

https://doi.org/10.47512/meujmaf.926505

Cited By: 2

Öz

Currently, maritime transportation constitutes the biggest part of world trade. For this reason, ships have a great importance and are effectively used throughout the world. Shipbuilding and ship repair industries frequently utilize engineering processes such as design, manufacture, repair, research and development, quality and control etc. In all the mentioned processes, digital data and CAD drawings of the ships are regularly used by engineers. While all these documents are usually included in the inventory of most ships, there are cases where these documents are lost or unavailable. Reverse engineering studies allow the reconstruction of digital data and CAD drawings of already existing ships. Ships are structures that are difficult to measure due to their sizes, complex geometries and curvature natures. For this reason, measurements are mostly made by advanced technological devices, not by human hands. Photogrammetry and terrestrial laser scanning are two of the most utilized methods contributing to ship surveys. In this study, a mobile phone-based photogrammetric survey method was utilized with the aim of obtaining the digital CAD data of a boat’s hull. Data acquisition, post-processing, accuracy analysis, and results are presented in the study.

Anahtar Kelimeler

3D modeling, Photogrammetry, Hull modeling, Reverse engineering

Teşekkür

The author gratefully appreciates the sincere thanks to the Geomatics Engineering Department of Mersin University for their support and contributions to the development of this work.

Kaynakça

• Abbas, M. A., Lichti, D. D., Chong, A. K., Setan, H., Majid, Z., Lau, C. L., Idris, K. M., & Ariff, M. F. M. (2017). Improvements to the accuracy of prototype ship models measurement method using terrestrial laser scanner. Measurement: Journal of the International Measurement Confederation, 100, 301–310. https://doi.org/10.1016/j.measurement.2016.12.053
• Ackermann, S., Menna, F., Scamardella, A., & Troisi, S. (2008). Digital photogrammetry for high precision 3D measurements in shipbuilding field. 6th CIRP Int. COnf. on ICME, 1(January), 6–11.
• Andreoni, V., Miola, A., & Perujo, A. (2008). Cost Effectiveness Analysis of the Emission Abatement in the Shipping Sector Emissions. In JRC Scientific and Technical Reports (Issue June 2014).
• Athanasios, P. (2020). Development of reverse engineering algorithms for automated generation of ship hulls from hydrostatic curves and general ship data (Diploma thesis, National Technical University of Athens, Athens, Greece). Retrieved from https://dspace.lib.ntua.gr/xmlui/handle/123456789/51418
• Burdziakowski, P., & Tysiac, P. (2019). Combined close range photogrammetry and terrestrial laser scanning for ship hull modelling. Geosciences (Switzerland), 9(5). https://doi.org/10.3390/geosciences9050242
• Deja, M., Dobrzyński, M., & Rymkiewicz, M. (2019). Application of Reverse Engineering Technology in Part Design for Shipbuilding Industry. Polish Maritime Research, 26(2), 126–133. https://doi.org/10.2478/pomr-2019-0032
• Doğan, Y., & Yakar, M. (2018). Gis and Three-Dimensional Modeling for Cultural Heritages. International Journal of Engineering and Geosciences, 50–55. https://doi.org/10.26833/ijeg.378257
• Holm, F. & Kalinovs, V. (2017). Risk and risk management in the shipping industry: An exploratory study of the Danish shipping industry and the perception of risk (Master's thesis, Copenhagen Business School, Copenhagen, Denmark). Retrieved from https://research-api.cbs.dk/ws/portalfiles/portal/60758736/309528_Master_s_thesis.pdf
• Ingle, K. A., Reverse Engineering. New York: McGraw-Hill, 1994.
• Koelman, H. J. (2010). Application of a photogrammetry-based system to measure and re-engineer ship hulls and ship parts: An industrial practices-based report. CAD Computer Aided Design, 42(8), 731–743. https://doi.org/10.1016/j.cad.2010.02.005
• Martelli, M., Vernengo, G., Bruzzone, D., & Notti, E. (2016). Overall efficiency assessment of a trawler propulsion system based on hydrodynamic performance computations. Proceedings of the International Offshore and Polar Engineering Conference, 2016-(June), 875–882.
• Menna, F., & Nocerino, E. (2014). Hybrid survey method for 3D digital recording and documentation of maritime heritage. Applied Geomatics, 6(2), 81–93. https://doi.org/10.1007/s12518-011-0074-9
• Tassetti, A. N., Martelli, M., & Buglioni, G. (2015). Reverse engineering techniques for trawler hull 3D modelling and energy efficiency evaluation. 18th International Conference on Ships and Shipping Research, NAV 2015, June, 1050–1060.
• Unal M, Yakar M, & Yildiz F (2004). Discontinuity surface roughness measurement techniques and the evaluation of digital photogrammetric method. In: Proceedings of the 20th international congress for photogrammetry and remote sensing, ISPRS, 1103– 1108
• Winyall, D., Edwards, J., & Brown, A. (2012). 3D hullform modeling to support naval ship design synthesis and multi-objective optimization. International Ship Design Conference (ISDC), Glasgow, Scotland.
• Yakar, M., 2009. Digital Elevation Model Generation By Robotictotal Station Instrument, Experimental Techniques, March/April 2009, doi: 10.1111/j.1747-1567.2008.00375.x
• Yakar M & Yılmaz H M (2008). Kültürel Miraslardan Tarihi Horozluhan’ın Fotogrametrik Rölöve Çalışması ve 3 Boyutlu Modellenmesi. Selçuk Üniversitesi Mühendislik, Bilim ve Teknoloji Dergisi, 23(2), 25-33.
• Yakar, M., Kabadayı, A., Yiğit, A. Y., Çıkıkçı, K., Kaya, Y. ve Catin, S. S. (2016). Emir Saltuk Kümbeti Fotogrametrik Rölöve Çalışması ve 3 Boyutlu Modellenmesi, Geomatik Dergisi, 1(1), 14-18.
• Yılmaz H M, Karabork H, Yakar M (2000). Yersel Fotogrametrinin Kullanım Alanları, Nigde Universitesi Muhendislik Bilimleri Dergisi, 4(1), 18- 28.