Design and analysis of switched reluctance motor with FEM based Ansys-Maxwell

Year 2022, , 159 - 164, 31.12.2022

Yıldırım Özüpak

https://doi.org/10.51354/mjen.1164604

Cited By: 1

Abstract

In this study, radial forces that create noise, which is a fundamental problem in Switched Reluctance Motor (SRM), are investigated. Since radial force causes stator vibrations and noise caused by magnetic field, a new switched reluctance motor model with increased stator and rotor poles has been designed in order to reduce the radial force acting on the rotor poles. In addition, a structure with high torque and low leakage flux compared to conventional winding structure has been proposed for Switched Reluctance Motors (SRM). The windings of the designed SRM are placed in layers, insulated from each other. Rotor poles are formed to move on both sides of each phase winding. Thus, the flux that will occur in the phase windings axially completes its circuit from the stator poles and the rotor poles. This designed ARM model has been examined by Finite Element Method (FEM. The proposed motor geometry has been analyzed with ANSYS Maxwell-3D, which performs FEM-based solution), and parametric analysis with ANSYS-RMxprt.

Keywords

SRM, Maxwel-3D, FEM

References

• [1]. Irwin, J. D., 2001. “Switched Reluctance Motor Drives; Modeling, Simulation, Analysis, Design, and Applications”, Series Editor, Auburn University, Alabama, A.B.D.
• [2]. Vijayraghavan, P., 2001. “Design of Switched Reluctance Motors and Development of a Universal Controller for Switched Reluctance and Permanent Magnet Brushless DC Motor Drives”, Faculty of the Virginia Polytechnic Institute and State University, Blacksburg, Virginia,
• [3]. Miller, T.J.E., 1993. “Switched Reluctance Motors and their Control”, Magna Physics Publishing and Clarendon Press, Oxford, İngiltere,
• [4]. Nasar, S.A., 1969. “DC Switched Reluctance Motor”, Proc. IEE, Cilt 116, No 6, 1048–1049,
• [5]. Lawrenson, P.J., 1980.Stephenson, J.M., Blenkinsop, P.T., Corda, J. and Fulton, N.N., “Variable-speed Switched Reluctance Motors”, Proc. IEE, Cilt 127, No 4, 253–265,
• [6]. Byrne, J. and Lacy, J.C.; 1976. “Electrodynamic system comprising a variable reluctance machine”, U.S. Patent 3956678.
• [7]. Miller T. J. E., 2001. “Electronic Control of Switched Reluctance Machines”, Oxford, İngiltere, 48-56,
• [8]. Miles A.R. 1991. “Design of a 5 MW, 9000V Switched Reluctance Motor”, IEEE Trans. Energy Conversion, Cilt 6, 484–491,
• [9]. Khwaja M. R., 2000. “Advantages of Switched Reluctance Motor Applications to EV and HEV: Design and Control Issues”, IEEE Transactions on Industrial Applications, Cilt 36, No 1, 1-4,
• [10]. S. S. Ahmad, E. Dhar, P. Kumar, and G. Narayanan, 2016. “Electromagnetic design of a 5-kW, 10,000 rpm switched reluctance machine,” in 2016 7th India International Conference on Power Electronics (IICPE), 1–6.
• [11]. S. Allirani, H. Vidhya, T. Aishwarya, T. Kiruthika, and V. Kowsalya, 2018. “Design and Performance Analysis of Switched Reluctance Motor Using ANSYS Maxwell,” in 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI), pp. 1427–1432.
• [12]. Uzhegov, N.; Barta, J.; Kurfurst, J.; Ondrusek, C.; Pyrhonen, J. 2017. Comparison of High-Speed Electrical Motors for a Turbo Cir-culator Application. IEEE Trans. Ind. Appl., 53, 4308–4317.
• [13]. Lim, M.-S.; Kim, J.-M.; Hwang, Y.S.; Hong, J.-P. 2017. Design of an ultra-high-speed permanent-magnet motor for an electric turbocharger considering speed response characteristics. IEEE/ASME Trans. Mechatron., 22, 774–784.
• [14]. Kocan, S.; Rafajdus, P. 2019. Dynamic model of high speed switched reluctance motor for automotive applications. Transp. Res. Procedia, 40, 302–309.