Antibiotic residuals removal via novel fabricated hydrogel from 2-hydroxyethyl methacrylate and sodium methacrylate

Yıl 2023, Cilt: 11 Sayı: 1, 145 - 153, 01.07.2023

Urmat Zholdoshbek Uulu , Sinan Akgöl , Nahit Aktaş

https://doi.org/10.51354/mjen.1288413

Öz

In this study, poly(2-hydroxyethyl-sodium methacrylate) (p(HEMA-SMA)) hydrogels were synthesized as a novel adsorbent to remove antibiotic residues from environmental samples. [p(HEMA-SMA)] co-polymers were synthesized by the free radical photopolymerization method. Synthesized hydrogels were characterized by different methods such as Fourier-transform infrared spectroscopy (FTIR), elemental and scanning electron microscope (SEM), and surface area calculations. The average size surface area of the synthesized hydrogels were 1.515 µm. Penicillin G (Pen. G) was used as the sample antibiotic for the adsorption process. The absorption of the drugs was studied under different environmental conditions. Medium pH, temperature, and hydrogel concentration were varied to achieve the highest absorption. The specific adsorption value (Qmax) of p(HEMA-SMA) copolymers was found 303.03mg/g for Penicillin G at the 0,35 mg/mL of initial Pen. G concentration. In conclusion, we suggest a novel microstructure, selective, low-cost adsorption polymeric material for the removal of Pen. G as the template antibiotic.

Anahtar Kelimeler

removal of penicillin G, copolymer, sorption isotherm

Destekleyen Kurum

Kyrgyz-Turkish Manas University

Proje Numarası

0009-0007-2219-8870

Kaynakça

• Aqda, T. G., Behkami, S., Raoofi, M., & Bagheri, H. (2019). Graphene oxide-starch-based micro-solid phase extraction of antibiotic residues from milk samples. Journal of Chromatography A, 1591, 7–14.
• Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017). Modelling and interpretation of adsorption isotherms. Journal of Chemistry, 2017, 1–11.
• Bulut, Y., Gözübenli, N., & Aydın, H. (2007). Equilibrium and kinetics studies for adsorption of direct blue 71 from aqueous solution by wheat shells. Journal of Hazardous Materials, 144, 300–306pp.
• Congur, G., Senay, H., Turkcan, C., Canavar, E., Erdem, A., & Akgol, S. (2013). Estrone specific molecularly imprinted polymeric nanospheres: Synthesis, characterization and applications for electrochemical sensor development. Combinatorial Chemistry & High Throughput Screening, 16(7), 503–510.
• Çorman, M. E., & Akgöl, S. (2012). Preparation of molecular imprinted hydrophobic polymeric nanoparticles havingstructural memories for lysozyme recognition. Artificial Cells, Blood Substitutes, and Biotechnology, 40(4), 245–255.
• Dincer, S., & Yigittekin, E. S. (2017). Spreading of antibiotic resistance with wastewater. Biological Wastewater Treatment and Resource
• Foo, K. Y., & Hameed, B. H. (2010). Insights into the modeling of adsorptionisothermsystems. Chemical Engineering Journal, 156(1), 2–10.
• Ghose, S., Hubbard, B. B., & Cramer, S. M. (2005). Protein interactions in hydrophobic charge induction chromatography (HCIC). Biotechnology Progress, 21, 498pp.
• Inanan, T., Tüzmen, N., Akgöl, S., & Denizli, A. (2016). Selective cholesterol adsorption by molecular imprinted polymeric nanospheres and application to GIMS. International Journal of Biological Macromolecules, 92, 451– 460.
• Inyinbor, A. A., Adekola, F. A., & Olatunji, G. A. (2016). Kinetics, isotherms and thermodynamic modeling of liquid phase adsorption of Rhodamine B dye onto Raphia hookerie fruit epicarp. Water Resources and Industry, 15, 14–27.
• Joshi, S. (2002). HPLC separation of antibiotics present in formulated and unformulated samples. Journal of Pharmaceutical and Biomedical Analysis, 28(5), 795–809.
• Kamranifar, M., Allahresani, A., & Naghizadeh, A. (2019). Synthesis and characterizations of a novel CoFe2O4@ CuS magnetic nanocomposite and investigation of its efficiency for photocatalytic degradation of penicillin G antibiotic in simulated wastewater. Journal of Hazardous Materials, 366, 545–555.
• Koch, C., Poghossian, A., Schöning, M. J., & Wege, C. (2018). Penicillin detection by tobacco mosaic virus- assisted colorimetric biosensors. Nanotheranostics, 2(2), 184–196.
• Kraemer, S. A., Ramachandran, A., & Perron, G. G. (2019). Antibiotic pollution in the environment: from microbial ecology to public policy. Microorganisms, 7(6), 180.
• Kuru, C. İ., Türkcan, C., Uygun, M., Okutucu, B., & Akgöl, S. (2014). Preparation and characterization of silanized poly(HEMA) nanopolymers for recognition of sugars. Artificial Cells, Nanomedicine, and Biotechnology, 44, 835–841.
• Lingzhi, L., Haojie, G., Dan, G., Hongmei, M., Yang, L., Mengdie, J., Chengkun, Z., & Xiaohui, Z. (2018). The role of two-component regulatory system in β-lactam antibiotics resistance. Microbiological Research, 215, 126–129.
• Lobanovska, M., & Pilla, G. (2017). Focus: Drug development: Penicillin’s discovery and antibiotic resistance: Lessons for the future? The Yale Journal of Biology and Medicine, 90(1), 135.
• Malkoç, E. (2006). Ni(II) removal from aqueous solutions using cone biomass of Thuja orientalis. Journal of Hazardous Materials, 137, 899–908pp.
• Moreno-González, D., Rodríguez-Ramírez, R., del Olmo-Iruela, M., & García-Campaña, A. M. (2017). Validation of a new method based on salting-out assisted liquid-liquid extraction and UHPLC-MS/MS for the determination of betalactam antibiotics in infant dairy products. Talanta, 167, 493–498.
• Okocha, R. C., Olatoye, I. O., & Adedeji, O. B. (2018). Food safety impacts of antimicrobial use and their residues in aquaculture. Public Health Reviews, 39(1), 1–22.
• Paulino, A. T., Minasse, F. A. S., Guilherme, M. R., Reis, A. V., Muniz, E. C., & Nozaki, J. (2006). Novel adsorbent based on silkworm chrysalides for removal of heavy metals from wastewaters. Journal of Colloid and Interface Science, 301, 479–487pp.
• Pinder, N., Brenner, T., Swoboda, S., Weigand, M. A., & HoppeTichy, T. (2017). Therapeutic drug monitoring of beta-lactam antibiotics–influence of sample stability on the analysis of piperacillin, meropenem, ceftazidime and flucloxacillin by HPLC-UV. Journal of Pharmaceutical and Biomedical Analysis, 143, 86–93.
• Samanidou, V., Michaelidou, K., Kabir, A., & Furton, K. G. (2017). Fabric phase sorptive extraction of selected penicillin antibiotic residues from intact milk followed by high performance liquid chromatography with diode array detection. Food Chemistry, 224, 131–138.
• Türkmen, D., Bereli, N., Çorman, M. E., Shaikh, H., Akgöl, S., & Denizli, A. (2014). Molecular imprinted magnetic nanoparticles for controlled delivery of mitomycin C. Artificial Cells, Nanomedicine, and Biotechnology, 42(5), 316–322.
• Willms, I. M., Yuan, J., Penone, C., Goldmann, K., Vogt, J., Wubet, T., Schöning, I., Schrumpf, M., Buscot, F., & Nacke, H. (2020). Distribution of medically relevant antibiotic resistance genes and Mobile genetic elements in soils of temperate forests and grasslands varying in land use. Genes, 11(2), 150.
• Yin, J., Meng, Z., Du, M., Liu, C., Song, M., & Wang, H. (2010). Pseudo-template molecularly imprinted polymer for selective screening of trace β-lactam antibiotics in river and tap water. Journal of Chromatography. A, 33, 5420–5426pp.