KARIŞIK HALOJENLİ PEROVSKİT FİLMLERİN TERMAL EŞ-BUHARLAŞTIRMA YÖNTEMİ İLE ÜRETİLMESİ

Öz

Perovskit tabakalarının termal eş-buharlaştırma yöntemi ile üretilmeleri güneş hücrelerinde kullanılmak üzere geniş alana sahip, delik kusuru bulunmayan ve homojen filmlerin üretilmesini sağlayan önemli bir tekniktir. Bu çalışmada, tüm aralığı kapsayan (0≤x≤3) farklı Br/I oranına dolayısı ile farklı bant aralıklarına sahip MAPbI_3-xBr_x perovskit tabakalar eş-buharlaştırma yöntemi ile ilk kez üretilmişlerdir. Geliştirilen filmlerin optik ve yapısal analizleri fotolüminesans, UV-Vis spektrometresi, X-ışını kırınımı ve taramalı elektron mikroskobu ile yapılmıştır. Bu çalışma termal eş-buharlaştırma tekniği ile farklı bant genişliğine sahip homojen perovskit tabakaların elde edilmesinin mümkün olduğunu göstermektedir. Bu çalışmada geliştirilen Stokes kaymasına sahip olmadığı gözlemlenen MAPbI₂Br perovskit filmi, özellikle yüksek verimli perovskit/silisyum çok eklemli güneş hücrelerinin elde edilebilmesi için önemlidir.

Anahtar Kelimeler

• Bant aralığı ayarlanabilirliği,termal eş-buharlaştırma,perovskit

FABRICATION OF MIXED HALIDE PEROVSKITE FILMS BY THERMAL CO-EVAPORATION

Öz

Thermal co-evaporation is a versatile method to fabricate highly uniform, large area and pin-hole free perovskite films for solar cells. In this study, perovskite films (MAPbI_3-xBr_x) were fabricated entirely by thermal co-evaporation in the full range (0≤x≤3) with different Br/I ratio for the first time. Films were characterized optically and structurally using photoluminescence and UV-Vis spectroscopy, X-ray diffraction and scanning electron microscopy. This work presents capability of thermal co-evaporation to fabricate highly-uniform perovskite films at the desired band gaps. MAPbI₂Br film, developed in this study, exhibits no Stokes shift, and therefore is particularly suitable in achieving high efficiency perovskite/silicon tandem solar cells.

Anahtar Kelimeler

• Band gap tuning,thermal co-evaporation,perovskite

Kaynakça

1. Kojima, A., Teshima, K., Shirai, Y. and Miyasaka, T., "Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells", Journal of the American Chemical Society, 131(17), 6050-6051, 2009.
2. https://www.nrel.gov/pv/cell-efficiency.html
3. Kim, H.S., Lee, C.R., Im, J.H., Lee, K.B., Moehl, T., Marchioro, A., Moon, S.J., Humphry-Baker, R., Yum, J.H., Moser, J.E. Grätzel, M. and Park, N.G., “Lead Iodide Perovskite Sentisized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%”, Scientific Reports, 2(591), 1–7, 2012.
4. Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M. and Han, L., “Efficient and Stable Large-Area Solar Cells with Inorganic Charge Extraction Layers”, Science, 350, 944–948, 2015.
5. Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., Losovyj, Y., Zhang, X., Dowben, P., Mohammed, O., Sargent E. and Bakr O., “Low Trap-State Density and Long Carrier Diffusion in Organolead Trihalide Perovskite Single Crystals”, Science, 347, 519–522, 2015.
6. Cao, K., Li, H., Liu, S.S., Cui, J., Shen Y. and Wang, M., “MAPbI3−xBrx Mixed Halide Perovskites for Fully Printable Mesoscopic Solar Cells with Enhanced Efficiency and Less Hysteresis”, Nanoscale, 8, 8839-8846, 2016.
7. Sahli, F., Werner, J., Kamino, B.A., Brauninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Leon, J.J.D., Sacchetto, D., Cattaneo, G., Despeisse, M., Boccard, M., Nicolay, S., Jeangros, Q., Niesen, B. and Ballif, C. “Fully Textured Monolithic Perovskite/Silicon Tandem Solar Cells with 25.2% Power Conversion Efficiency”, Nature Materials, 17, 820–826, 2018.
8. Noh, J.H., Im, S.H., Heo, J.H., Mandal, T.N. and Seok, S.I., “Chemical Management for Colorful, Efficient, and Stable Inorganic–Organic Hybrid Nanostructured Solar Cells”, Nano Letters, 13, 1764−1769, 2013.

9. Sadhanala, A., Deschler, F., Thomas, T.H., Dutton, S.E., Goedel, K.C., Hanusch, F.C., Lai, M.L. Steiner, U., Bein, T. Docampo, P., Cahen, D. and Friend, R.H., “Preparation of Single-Phase Films of CH3NH3Pb(I1–xBrx)3 with Sharp Optical Band Edges”, The Journal of Physical Chemistry Letters, 5, 2501−2505, 2014.
10. Kulkarni, S.A., Baikie, T., Boix, P.P., Yantara, N., Mathews N. and Mhaisalkar, S., “Band-Gap Tuning of Lead Halide Perovskites Using a Sequential Deposition Process”, Journal of Materials Chemistry A, 2, 9221–9225, 2014.
11. Liang G., Lan H., Fan, P., Lan, C., Zheng, Z., Peng, H. and Luo, J., “Highly Uniform Large-Area (100 cm2) Perovskite CH3NH3PbI3 Thin-Films Prepared by Single-Source Thermal Evaporation”, Coatings, 8, 256(1-11), 2018.
12. Liu, M., Johnston, M.B. and Snaith, H.J., “Efficient Planar Heterojunction Perovskite Solar Cells by Vapour Deposition”, Nature, 501, 395−398, 2013.
13. McMeekin, D.P., Sadoughi, G., Rehman, W., Eperon, G.E., Saliba, M., Hörantner, M.T., Haghighirad, A., Sakai, N., Korte, L., Rech, B., Johnston, M.B., Herz, L.M. and Snaith, H.J., “A Mixed-Cation Lead Mixed-Halide Perovskite Absorber for Tandem Solar Cells”, Science, 351, 151−155, 2016.
14. Eperon, G. E., Leijtens, T., Bush, K.A., Prasanna, R., Green, T., Wang, J.T.-W., McMeekin, D.P., Volonakis, G., Milot, R.L., May, R., Palmstrom, A., Slotcavage, D.J, Belisle, R.A., Patel, J.B., Parrott, E.S., Sutton, R.J., Ma, W., Moghadam, F., Conings, B., Babayigit, A., Boyen, H.-G., Bent, S., Giustino, F., Herz, L.M., Johnston, M.B., McGehee, M.D. and Snaith, H.J., “Perovskite-Perovskite Tandem Photovoltaics with Optimized Band Gaps”, Science, 354, 861−865, 2016.
15. Zhou, X., Ye, W., Li, X., Zheng, W., Lin, R., Huang, F. and Zhong, D., “Band Alignment of MAPb(I1–xBrx)3 Thin Films by Vacuum Deposition”, Applied Physics Letters, 109, 233906(1-4), 2016.
16. Im, J.-H., Lee, C.-R., Lee, J.-W, Park, S.-W. and Park, N.-G. “6.5% Efficient Perovskite Quantum-Dot-Sensitized Solar Cell”, Nanoscale, 3, 4088–4093, 2011.
17. Baikie, T., Fang, Y., Kadro, J.M., Schreyer, M., Wei, F., Mhaisalkar, S.G., Gratzel, M. and White, T.J., “Synthesis and Crystal Chemistry of the Hybrid Perovskite (CH3NH3)PbI3 for Solid-State Sensitised Solar Cell Applications”, Journal of Materials Chemistry A, 1, 5628–5641, 2013.
18. Hu, Y., Schlipf, J., Wussler, M., Petrus, M.L., Jaegermann, W., Bein, T. Müller-Buschbaum, P. and Docampo, P., “Hybrid Perovskite/Perovskite Heterojunction Solar Cells” ACS Nano, 10, 5999−6007, 2016.
19. Patterson, A.L., “The Scherrer Formula for X-Ray Particle Size Determination”, Physical Review, 56, 978-982, 1939.
20. Wang, K., Lin, Z., Ma, J., Liu, Z., Zhou, L., Du, J., Chen, D., Zhang, C., Chang, J. and Hao, Y., “High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization”, ACS Omega, 2, 6250−6258, 2017.