Adsorptive Desulfurization of Crude Oil with Clinoptilolite Zeolite

Yıl 2022, Cilt: 7 Sayı: 3, 284 - 293, 25.12.2022

Vildan Özkan Abdullah Özkan

https://doi.org/10.28978/nesciences.1222495

Cited By: 4

Öz

Crude oil; is a fossil fuel containing carbon, hydrogen, sulfur and many other components and is one of the world's largest and most widely used energy sources. However, in order for crude oil to be used as an energy source, it must be refined. With the use of petroleum products obtained as a result of refining, very high amounts of SOx gas are released into the atmosphere. These gases seriously harm both the environment and human health. This study aimed to reduce the amount of sulfur in crude oil and reduce its possible damages by using clinoptilolite zeolite (CZ). For this purpose, first of all, CZ; was characterized by SEM and XRF. Then, 0.1 g, 0.5 g, 1 g, 2 g and 5 g of the characterized CZ were weighed and added to the 50 mL crude oil samples separately. The mixture was mixed with a magnetic stirrer at 400 rpm for 60 and 120 minutes at room temperature before going through with an adsorptive desulfurization step. Afterwards, it was separated from the adsorbent by centrifugation and the residual sulfur amount was determined by ASTM D 1552-03 method. As a result of this study, which was carried out in an experimental laboratory environment; it has been observed that the desulfurization efficiency varies between 0.75 and 5.76 % (w/v) with the use of CZ adsorbent. Moreover; it was determined that the highest sulfur removal was obtained by using 5 g CZ.

Anahtar Kelimeler

Crude oil, sulphur, desulphurization, clinoptilolite zeolite

Kaynakça

• Ahmed, M.J. (2016). Preparation of activated carbons from date (Phoenix dactylifera L.) palm stones and application for wastewater treatments. Process Safety and Environmental Protection, 102, 168-182. https://doi.org/10.1016/j.psep.2016.03.010.
• ASTM D1552-03, Standard test method for sulfur in petroleum products (hightemperature method). Annual Book of Standards (American Society for Testing and Materials (ASTM), West Conshohocken, PA) Vol. 05.01 (2000).
• Baeza, P., Aguila, G., Vargas, G., Ojeda, J., & Araya, P. (2012). Adsorption of thiophene and dibenzothiophene on highly dispersed Cu/ZrO2 adsorbents. Applied Catalysis B: Environmental, 111, 133-140. https://doi.org/10.1016/j.apcatb.2011.09.026.
• Blanco-Brieva, G., Campos-Martin, J.M., Al-Zahrani, S.M., & Fierro, J.L.G. (2010). Removal of refractory organic sulfur compounds in fossil fuels using MOF sorbents. Global NEST Journal, 12(3), 296-304.
• Dashtpeyma, G., Shabanian, S.R., Ahmadpour, J., & Nikzad, M. (2022). The investigation of adsorption desulphurization performance using bimetallic CuCe and NiCe mesoporous Y zeolites: Modification of Y zeolite by H4EDTA-NaOH sequential treatment. Fuel Processing Technology, 235, 107379. https://doi.org/10.1016/j.fuproc.2022.107379.
• Dharaskar, S.A., Wasewar, K.L., Varma, M.N., Shende, D.Z., Tadi, K.K., & Yoo, C.K. (2014). Synthesis, characterization, and application of novel trihexyl tetradecyl phosphonium bis (2, 4, 4-trimethylpentyl) phosphinate for extractive desulfurization of liquid fuel. Fuel Processing Technology, 123, 1-10. https://doi.org/10.1016/j.fuproc.2014.02.001.
• Eßer, J., Wasserscheid, P., & Jess, A. (2004). Deep desulfurization of oil refinery streams by extraction with ionic liquids. Green Chemistry, 6(7), 316-322. https://doi.org/10.1039/B407028C.
• Gokel, G.W., Gerdes, H.M., & Dishong, D.M. (1980). Sulfur heterocycles. 3. Heterogeneous, phase-transfer, and acid-catalyzed potassium permanganate oxidation of sulfides to sulfones and a survey of their carbon-13 nuclear magnetic resonance spectra. The Journal of Organic Chemistry, 45(18), 3634-3639. https://doi.org/10.1021/jo01306a019.
• Gupta, N.K., Bae, J., Kim, S., & Kim, K.S. (2021). Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism. Chemosphere, 274, 129789. https://doi.org/10.1016/j.chemosphere.2021.129789.
• Kavak, Y and Haspolat, K. (2002). Farklı Yaklaşımlarla Enerji Kaynakları. Orient Yayınları, Gaziosmanpaşa– Çankaya/Ankara, Turkey.
• Kazemi-Beydokhti, A., & Hassanpour-Souderjani, H. (2022). Physical and chemical surface modification of carbon nanotubes for adsorptive desulfurization of aromatic impurities in diesel fuel. Environmental Science and Pollution Research, 29(22), 33558-33571. https://doi.org/10.1007/s11356-022-18576-6.
• Kubota, A. & Takeuchi, H. (2004). An Unexpected Incident with m-CPBA. Organic Process Research & Development, 8, pp. 1076-1078.
• Li, Y., Chi, K., Zhang, H., Du, P., Hu, D., Xiao, C., ... & Xu, C. (2018). The influence of hydrothermal crystallization temperature on a novel FDU-12 mesoporous composite assembled by ZSM-5 nanoclusters and its hydrodesulfurization performance for DBT and FCC diesel. Fuel Processing Technology, 180, 56-66. https://doi.org/10.1016/j.fuproc.2018.08.010.
• Liao, J., Wang, Y., Chang, L., & Bao, W. (2015). Preparation of M/γ-Al2O3 sorbents and their desulfurization performance in hydrocarbons. RSC Advances, 5, pp. 62763-62771. https://doi.org/10.1039/c5ra06430a.
• Özkan, A. (2022). Novel Research on the Use of Multi-Wall Carbon Nanotubes Functionalized with Copper Oxide Nanoparticles in the Adsorptive Desulphurization of Crude Oil: Laboratory Research. ECS Journal of Solid State Science and Technology, 11(9), 091012. https://doi.org/10.1149/2162-8777/ac9337.
• Özkan, A., & Özkan, V. (2019). Effect of Clinoptilolite-Rich Zeolite on the Properties of Water Based Drilling Fluid. Fresenius Environmental Bulletin, 28(3), 2232-2237. Rajendran, A., Fan, H.X., Feng, J., & Li, W.Y. (2020). Desulfurization on Boron Nitride and Boron Nitride‐based Materials. Chemistry–An Asian Journal, 15(14), 2038-2059. https://doi.org/10.1002/asia.202000479.
• Rezvani, M.A., Shaterian, M., Aghbolagh, Z.S., & Akbarzadeh, F. (2019). Synthesis and characterization of new inorganic‐organic hybrid nanocomposite PMo11Cu@ MgCu2O4@ CS as an efficient heterogeneous nanocatalyst for ODS of real fuel. ChemistrySelect, 4(20), 6370-6376. https://doi.org/10.1002/slct.201900202.
• Salehi, E., Askari, M., Afshar, S., Eidi, B., & Aliee, M. H. (2020). Adsorptive desulfurization of wild naphtha using magnesium hydroxide-coated ceramic foam filters in pilot scale: Process optimization and sensitivity analysis. Chemical Engineering and Processing-Process Intensification, 152, 107937. https://doi.org/10.1016/j.cep.2020.107937.
• Shaabani, A., Behnam, M., & Rezayan, A.H. (2009). Tungstophosphoric acid (H3PW12O40) catalyzed oxidation of organic compounds with NaBrO3. Catalysis Communications, 10(7), 1074-1078. https://doi.org/10.1016/j.catcom.2008.12.059
• Sonel, N. (1997). Petrol Jeolojisi. AÜFF Döner Sermaye İşletmesi Yayınları, No:46, Ankara, Turkey.
• Stanislaus, A., Marafi, A., & Rana, M.S. (2010). Recent advances in the science and technology of ultra low sulfur diesel (ULSD) production. Catalysis Today, 153(1-2), 1-68. https://doi.org/10.1016/j.cattod.2010.05.011.
• Svinterikos, E., Zuburtikudis, I., Al-Marzouqi, M. (2019). Carbon Nanomaterials for the Adsorptive Desulfurization of Fuels. Journal of Nanotechnology, pp. 1-13, https://doi.org/10.1155/2019/2809867.
• Tuna, Ö., Simsek, E.B., Sarıoğlan, A., & Çetin, Y.D. (2020). Multifunctional and highly active zinc titanate incorporated with copper for adsorptive hot syngas desulfurization and photocatalytic dye degradation. Journal of the Taiwan Institute of Chemical Engineers, 112, 388-396. https://doi.org/10.1016/j.jtice.2020.04.008.
• Vickers, N.J. (2017). Animal communication: when i’m calling you, will you answer too?. Current Biology, 27(14), R713-R715. https://doi.org/10.1016/j.cub.2017.05.064
• Vít, Z., Gulková, D., Kaluža, L., & Kupčík, J. (2015). Pd–Pt catalysts on mesoporous SiO2–Al2O3 with superior activity for HDS of 4, 6-dimethyldibenzothiophene: Effect of metal loading and support composition. Applied Catalysis B: Environmental, 179, 44-53. https://doi.org/10.1016/j.apcatb.2015.04.057.
• Wang, J., Yang, B., Peng, X., Ding, Y., Yu, S., Zhang, F., ... & Guo, J. (2022). Design and preparation of polyoxometalate-based catalyst [MIMPs]3PMo6W6O40 and its application in deep oxidative desulfurization with excellent recycle performance and low molar O/S ratio. Chemical Engineering Journal, 429, 132446. https://doi.org/10.1016/j.cej.2021.132446.
• Watanabe, S., Ma, X., & Song, C. (2021). Adsorptive desulfurization of jet fuels over TiO2-CeO2 mixed oxides: role of surface Ti and Ce cations. Catalysis Today, 371, 265-275. https://doi.org/10.1016/j.cattod.2020.07.071.
• Xiang, L., Jingyan, W., Qingyuan, L., Jiang, S., Zhang, T., & Shengfu, J.I. (2014). Synthesis of rare earth metal-organic frameworks (Ln-MOFs) and their properties of adsorption desulfurization. Journal of Rare Earths, 32(2), 189-194. https://doi.org/10.1016/S1002-0721(14)60050-8.
• Yang, N., Lu, L., Zhu, L., Wu, P., Tao, D., Li, X., ... & Zhu, W. (2022). Phosphomolybdic acid encapsulated in ZIF-8-based porous ionic liquids for reactive extraction desulfurization of fuels. Inorganic Chemistry Frontiers, 9(1), 165-178. https://doi.org/10.1039/D1QI01255J.
• Yeole, N.R., & Parthasarthy, V. (2022). Design of experiments (DOE) for adsorptive desulfurization (ADS) of liquid fuels–A review. Materials Today: Proceedings, 57, 1613-1618. https://doi.org/10.1016/j.matpr.2021.12.230 Yu, M., Zhang, N., Fan, L., Zhang, C., He, X., Zheng, M., & Li, Z. (2015). Removal of organic sulfur compounds from diesel by adsorption on carbon materials. Reviews in Chemical Engineering, 31(1), 27-43. https://doi.org/10.1515/revce-2014-0017.
• Zhou, W., Zhou, A., Zhang, Y., Zhang, C., Chen, Z., Liu, L., ... & Tao, X. (2019). Hydrodesulfurization of 4,6-dimethyldibenzothiophene over NiMo supported on Ga-modified Y zeolites catalysts. Journal of Catalysis, 374, 345-359. https://doi.org/10.1016/j.jcat.2019.05.013.