In this study, AISI 1040 steel is machined on CNC lathes. Taguchi
L16 ortogonal array was used as experimental design. Experiments
were carried out with selected the three cutting parameters. These parameters
were determined as feed rate, cutting speed and cutting depth. Turning
operation was carried out in dry conditions with diamond cutting tools. At the
end of experiments, the values of surface roughness (Rz) on samples were found.
Signal/Noise (S/N) rates were found with using the Taguchi method. According to
the results, feed rate had the most significant effect on Rz among three
factors. In ANOVA analysis, respectively feed rate, cutting depth and cutting
speed are effective at 95% confidence level at Rz value. In repetition
experiments carried out for parameters chosen in Taguchi prediction, it was
identified that Taguchi works with nearly 94% accuracy.
Birincil Dil | İngilizce |
---|---|
Konular | Makine Mühendisliği |
Bölüm | Araştırma Makalesi |
Yazarlar | |
Yayımlanma Tarihi | 1 Ekim 2018 |
Gönderilme Tarihi | 26 Mart 2018 |
Kabul Tarihi | 7 Haziran 2018 |
Yayımlandığı Sayı | Yıl 2018 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.