Heat transfer analysis of different thermal oils in parabolic trough solar collectors with longitudinal sinusoidal internal fin

Yıl 2019, , 848 - 858, 01.10.2019

Burak Kurşun

https://doi.org/10.16984/saufenbilder.493707

Öz

Parabolic
trough solar collectors (PTSC) plays an important role in the heating of
fluids and in the generation of electricity . In
this study, heat transfer and temperature distribution analysis was carried out
for the use of internal longitudinal fins with different geometries in a
parabolic trough solar collector.
 Numerical analyzes were carried out for
different Reynolds (Re) numbers (2x10⁴-8 x10⁴) at
steady-state conditions and three different thermal oils were used as heat
transfer fluid (HTF). The use of the internal fin with sinusoidal lateral
surface for all types of thermal oil increased the heat transfer and made the
temperature distribution in the fluid more uniform. The
highest thermal enhancement factor was occurred for Syltherm 800 oil and
sinusoidal fin geometry. With the use of Syltherm 800 oil, the thermal
enhancement factor () increased by 40% and 44% respectively
according to the Therminol VP1 and D12 oil type for the case with sinusoidal
fin.

Anahtar Kelimeler

Longitudinal fin, Parabolic trough, Sinusoidal fin, Thermal oil

Kaynakça

• [1] W. Fuqiang, T. Zhexiang, G. Xiangtao, T. Jianyu, H. Huaizhi and L. Bingxi, “Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube,” Energy, vol. 114, pp. 275-292, 2016.
• [2] W. Fuqiang, C. Ziming, T. Jianyu, Y. Yuan, S. Yong and L. Linhua, “Progress in concentrated solar power technology with parabolic trough collector system: A comprehensive review,” Renewable and Sustainable Energy Reviews, vol. 79, pp. 1314-1328, 2017.
• [3] Z. D. Cheng, Y. L. He and F. Q. Cui, “Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers,” International journal of heat and mass transfer, vol. 55, no. 21-22, pp. 5631-5641, 2012.
• [4] D. R. Waghole, R. M. Warkhedkar and R. K. Shrivastva, “Experimental investigations on heat transfer and friction factor of silver nanofluid in absorber/receiver of parabolic trough collector with twisted tape inserts,” Energy Procedia, vol. 45, pp. 558-567, 2014.
• [5] K. R. Kumar and K. S. Reddy, “Effect of porous disc receiver configurations on performance of solar parabolic trough concentrator,” Heat and Mass Transfer, vol. 48, no. 3, pp. 555-571, 2012.
• [6] P. Wang, D. Y. Liu and C. Xu, “Numerical study of heat transfer enhancement in the receiver tube of direct steam generation with parabolic trough by inserting metal foams,” Applied energy, vol. 102, pp. 449-460, 2013.
• [7] S. Ghadirijafarbeigloo, A. H. Zamzamian and M. Yaghoubi, “3-D numerical simulation of heat transfer and turbulent flow in a receiver tube of solar parabolic trough concentrator with louvered twisted-tape inserts,” Energy procedia, vol. 49, pp. 373-380, 2014.
• [8] O. A. Jaramillo, M. Borunda, K. M. Velazquez-Lucho and M. Robles,“Parabolic trough solar collector for low enthalpy processes: An analysis of the efficiency enhancement by using twisted tape inserts,” Renewable Energy, vol. 93, pp. 125-141, 2016.
• [9] Z. Huang, G. L. Yu, Z. Y. Li and W. Q. Tao, “Numerical study on heat transfer enhancement in a receiver tube of parabolic trough solar collector with dimples, protrusions and helical fins,” Energy Procedia, vol. 69, pp. 1306-1316, 2015.
• [10] X. Gong, F. Wang, H. Wang, J. Tan, Q. Lai and H. Han, “Heat transfer enhancement analysis of tube receiver for parabolic trough solar collector with pin fin arrays inserting,” Solar Energy, vol. 144, pp. 185-202, 2017.
• [11] E. Bellos, C. Tzivanidis and D. Tsimpoukis, “Thermal enhancement of parabolic trough collector with internally finned absorbers,” Solar Energy, vol. 157, pp. 514-531, 2017.
• [12] Y. Demagh, I. Bordja, Y. Kabar and H. Benmoussa, “A design method of an S-curved parabolic trough collector absorber with a three-dimensional heat flux density distribution,” Solar Energy, vol. 122, pp. 873-884, 2015.
• [13] N. R. Rosaguti, D. F. Fletcher and B. S. Haynes, “Low-Reynolds number heat transfer enhancement in sinusoidal channels,” Chemical engineering science, vol. 62, no. 3, pp. 694-702, 2007.
• [14] Y. Sui, C. J. Teo and P. S. Lee, “Direct numerical simulation of fluid flow and heat transfer in periodic wavy channels with rectangular cross-sections,” International Journal of Heat and Mass Transfer, vol. 55, no. 1-3, pp. 73-88, 2012.
• [15] A. Fernández-García, E. Zarza, L. Valenzuela, and M. Pérez, “Parabolic-trough solar collectors and their applications,” Renewable and Sustainable Energy Reviews, vol. 14, no. 7, pp. 1695-1721, 2010.
• [16] R. Forristall, “Heat transfer analysis and modeling of a parabolic trough solar receiver implemented in engineering equation solver (No. NREL/TP-550-34169),” National Renewable Energy Lab., Golden, CO.(US), 2003.
• [17] Y. A. Cengel, and A. J. Ghajar, “Heat and mass transfer (a practical approach, SI version).”, 2011.
• [18] M. K. Jensen and A. Vlakancic, “Technical Note Experimental investigation of turbulent heat transfer and fluid flow in internally finned tubes,” International Journal of Heat and Mass Transfer, vol. 42, no. 7, pp. 1343-1351, 1999.
• [19] Ansys Inc., “ANSYS FLUENT 14.0 Theory Guide,” 2011.
• [20] H. K. Versteeg and W. Malalasekera, “An introduction to computational fluid dynamics: the finite volume method,” Pearson Education, 2007.
• [21] Z. Huang, Z. Y. Li, G. L. Yu and W. Q. Tao, “Numerical investigations on fully-developed mixed turbulent convection in dimpled parabolic trough receiver tubes,” Applied Thermal Engineering, vol. 114, pp.1287-1299, 2017.
• [22] R. L. Webb, “Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design,” International Journal of Heat and Mass Transfer, vol. 24, no. 4, pp. 715-726, 1981.
• [23] S. Khanna, S. B. Kedare and S. Singh, “Deflection and stresses in absorber tube of solar parabolic trough due to circumferential and axial flux variations on absorber tube supported at multiple points,” Solar Energy, vol. 99, pp. 134-151, 2014.
• [24] S. Khanna, V. Sharma, S. B. Kedare and S. Singh, “Experimental investigation of the bending of absorber tube of solar parabolic trough concentrator and comparison with analytical results,” Solar Energy, vol. 125, pp. 1-11, 2016.
• [25] Eastman Therminol® heat transfer fluids, https://www.therminol.com (Accessed 2018-12-7).