Effect of Gd211 Addition on the Vertical Levitation Force of Gd123 Superconductors

Yıl 2020, , 110 - 120, 01.02.2020

Sait Barış Güner

https://doi.org/10.16984/saufenbilder.591926

Öz

We investigated the microstructure and magnetic
properties of Gd123:Gd211 = 1-y : y (y = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5) bulk
superconductors with the diameter of 13 mm and thickness of 5 mm fabricated by
melt-textured method.  The vertical
levitation force between melt-textured bulk superconductors and a permanent magnet
is measured at 30, 40, 50, 60, and 77 K under zero-field-cooling (ZFC) and
field-cooling (FC) regimes by Magnetic Levitation Force Measurement System
(MLFMS). The phase and microstructures properties of all samples are determined
by SEM (Scanning Electron Microscope). The measurements of superconducting
characteristics showed that the maximum vertical levitation forces of the Gd01
sample were noted as 3.04, 2.30, 1.53, 0.91 and 0.16 N at the temperatures of
30, 40, 50, 60 and 77 K, respectively. The present results perform that a
high-performance good-quality GdBCO can improve from laboratory conditions to
technological applications for large scale levitated system. 

Anahtar Kelimeler

High-Tc superconductors, Magnetic Levitation Measurements, Microstructure

Destekleyen Kurum

Recep Tayyip Erdogan University

Proje Numarası

2012.102.01.1

Teşekkür

This research was supported by the Recep Tayyip Erdogan University Scientific Research Projects Coordination Department (project number: 2012.102.01.1).

Kaynakça

• M. Murakami, N. Sakai, T. Higuchi and S. I. Yoo, “Melt-processed light rare earth element - Ba - Cu – O,” Supercond. Sci. Technol. vol. 9, pp. 1015, 1996.
• H. Ikuta, A. Mase, Y. Yanagi, M. Yoshikawa, Y. Itoh, T. Oka and U. Mizutani, “Melt-processing of Ag-added LRE–Ba–Cu–O (LRE=Nd, Sm),” Appl. Supercond., vol. 6 pp. 109-117, 1998.
• H. Ikuta, S. Ikeda, A. Mase, M. Yoshikawa, Y. Yanagi, Y. Itoh, T. Oka and U. Mizutani, “Melt-processed Sm - Ba - Cu - O superconductors trapping strong magnetic field,” Supercond. Sci. Technol., vol. 11 pp. 1345, 1998.
• J. R. Hull, S. Hanany, T. Matsumura, B. Johnson, T. Jones, “Characterization of a high-temperature superconducting bearing for use in a cosmic microwave background polarimeter,” Supercond. Sci. Technol., vol. 18, pp. S1, 2005.
• K. B. Ma, Y. V. Postrekhin and W. K. Chu, “Superconductor and magnet levitation devices,” Rev. Sci. Instrum., vol. 74, pp. 4989, 2003.
• W. Gapalek, T. Habisreuthe, T. Strasser, M. Wu, D. Litzkendorf, K. Fischer, P. Gornert, A. Gladum, P. Stoye, P. Verges, K. V. Ilushin, and L. K. Kovalev, “Remanent induction and levitation force of melt textured YBCO,” Appl. Supercond., vol. 2, pp. 465, 1994.
• C. Xu, A. Hu, N. Sakai, M. Izumi and I. Hirabayashi, Enhanced Jc in air-processed GdBa2Cu3O7−δ superconductors,” Physica C, vol. 426–431, pp. 613–617, 2005.
• W. M. Yang, L. Zhou, Y. Feng, P. X. Zhang, S. Chen, M. Z. Wu, C. P. Zhang, J. R. Wang, Z. H. Du, F. Y. Wang, Z. M. Yu, X. Z. Wu, W. Gawalek and P. Gornert, “The grain-alignment and its effect on the levitation force of melt processed YBCO single-domained bulk superconductors,” Physica C, vol. 307, pp. 271–276, 1998.
• S. Haseyama, S. Kohayasi, J. Ishiai, S. Nagaya and S. Yosizawa, “Preparation and Properties of Melt-Processed Large RE(Eu,Gd)-System Superconductor Bulk in Air,” Adv. Supercond., vol. 11, pp. 701, 1998.
• S. Nariki, N. Sakai, M. Matsui and M. Murakami, “Effect of silver addition on the field trapping properties of Gd–Ba–Cu–O bulk superconductors,” Physica C, vol. 378–381, pp. 774–778, 2002.
• M. D. Ainslie, H. Fujishiro, H. Mochizuki, K. Takahashi, Y. Shi, D. K. Namburi, J. Zou, D. Zhou, S. R. Dennis and D. A. Cardwell, “Enhanced trapped field performance of bulk high-temperature superconductors using split coil, pulsed field magnetization with an iron yoke,” Supercond. Sci. Technol., vol. 29, pp. 74003, 2016.
• J. H. Durrell, A. R. Dennis, J. Jaroszynski, M. D. Ainslie, K. G. B. Palmer, Y. H. Shi, A. M. Campbell, J. Hull, M. Strasik, E. E. Hellstrom and D.A. Cardwell, “A trapped field of 17.6T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel,” Supercond. Sci. Technol., vol. 27, pp. 082001, 2014.
• K. M. Kim, S. D, Park, S. H. Jun, T. K. Ko and C. J. Kim, “Simple die pressing for making artificial holes in single-grain Gd1.5Ba2Cu3O7−y superconductors,” Supercond. Sci. Technol., vol. 25, pp. 105016, 2012.
• S. Nariki, M. Fujikura, N. Sakai, I. Hirabayashi and M. Murakami, “Field trapping and magnetic levitation performances of large single-grain GdBaCuO at different temperatures,” Physica C, vol. 426-431, pp. 654-659, 2005.
• S. B. Guner, S. Celik, A. Cansız and K. Ozturk, “Lateral Force Measurements for (Gd123)1−x:(Gd211)x Superconductors at Different Temperatures,” J. Supercond. Nov. Magn., vol. 30, pp. 1335–1343, 2017.
• S. Nariki, S. J. Seo, N. Sakai and M. Murakami, “Influence of the size of Gd211 starting powder on the critical current density of Gd–Ba–Cu–O bulk superconductor,” Supercond. Sci. Technol., vol. 13, pp. 778–784, 2000.
• S. Celik, “Design of magnetic levitation force measurement system at any low temperatures from 20 K to room temperature,” J. Alloys Compd., vol. 662, pp. 546-556, 2015.
• B Savaskan, E. T. Koparan, S. B. Güner, S. Celik and E. Yanmaz, “The size effect on the magnetic levitation force of MgB2 bulk superconductors,” Cryogenics, vol. 80, pp. 108-114, 2016.
• K. Ozturk, S. Celik and A. Cansız, “Determination of levitation force and pinning properties of (Sm123)1−x(Yb211)x bulk superconductor depending on Yb211 doping ratio,” Phys. Status Solidi A, vol. 206, pp. 2569–2575, 2009.
• M. Murakami, T. Oyama, H. Fujimoto, S. Gotoh, K. Yamaguchi, Y. Shiohara, N. Koshizuoka and S. Tanaka, “Melt processing of bulk high T/sub c/ superconductors and their application,” IEEE Trans Magn., vol. 27, pp. 1479–1486, 1991.
• E. Perini, G. Giunchi, M. Geri and A. Morandi, “Experimental and numerical investigation of the levitation force between bulk permanent magnet and MgB2 disk,” IEEE Trans. Appl. Supercond., vol. 19, pp. 2124-2128, 2009.
• O. Erdem, M. Abdioglu, S. B. Guner, S. Celik and T. Kucukomeroglu, “Improvement in levitation force performance of bulk MgB2 superconductors through coronene powder adding,” Journal of Alloys and Compounds, vol. 727, pp. 1213-1220, 2017.
• S. B. Guner, B. Savaskan, K. Ozturk, S. Celik, C. Aksoy, F. Karaboga, E. T. Koparan and E. Yanmaz, “Investigation on superconducting and magnetic levitation force behaviour of excess Mg doped-bulk MgB2 superconductors,” Cryogenics, vol. 101, pp. 131-136, 2019.
• B. Savaşkan, E. T. Koparan, S. B. Güner, S. Çelik, K. Öztürk and E. Yanmaz, “Effect of C4H6O5 Adding on the Critical Current Density and Lateral Levitation Force of Bulk MgB2,” Journal of Low Temperature Physics, vol. 181, pp. 38-48, 2015.
• B. Savaskan, E. T. Koparan, S. Celik, K. Ozturk and E. Yanmaz, “Investigation on the levitation force behaviour of malic acid added bulk MgB2 superconductors,” Phys. C, vol. 502, pp. 63-69, 2014.
• H. B. Nadendla, D. A. Cardwell, W. Lo, A. M. Campbell, “Flux pinning in large NdBa2Cu3O7 grains fabricated by seeded-melt growth,” Phys. Rev. B, vol. 61, pp. 735–740, 2000.
• S.Nariki, N. Sakai, M.Murakami, “Preparation and properties of OCMG-processed Gd–Ba–Cu–O bulk superconductors with very fine Gd211 particles,” Physica C, vol. 357–360 pp. 811-813, 2001.
• S. Nariki, N. Sakai, M. Murakami and I. Hirabayashi, “High critical current density in RE–Ba–Cu–O bulk superconductors with very fine RE2BaCuO5 particles,” Physica C, vol. 412–414, pp. 557–565, 2004.