Improving Energy Harvesting Efficiency by Vibration-Induced Stresses of Piezoelectric Patch Glued Tapered Beams

Yıl 2020, , 622 - 629, 01.08.2020

Fevzi Çakmak Bolat

https://doi.org/10.16984/saufenbilder.690571

Öz

In this study, the effects of taper ratio and boundary conditions on the energy harvest performance of a beam element were examined. For these purpose, different taper ratio beams were analyzed numerically. The energy harvesting process was achieved by gluing a piezoelectric patch onto the cantilever tapered beam. Different taper ratio beams were designed and the effects of these taper ratio on stress change were investigated. In piezoelectric materials, when mechanical stress or strain is applied to the material, they generate electrical potential energy as a response. In order to increase the stresses on the tapered beam, the boundary condition was applied to be the thin edge of the tapered beam element in this study. In this way, the effect of tip mass was created and it was aimed to increase the stress magnitude due to vibration on the beam. Stress changes and displacement magnitudes of beams examined by applying load on beams having different taper ratio. The effect of these alterations on energy harvest efficiency was analyzed.

Anahtar Kelimeler

tapered beam, Piezoelectric material, Energy harvesting, Vibration-induced stress

Kaynakça

• [1] Wang, Junlei, et al. “The state-of-the-art review on energy harvesting from flow-induced vibrations”, Applied Energy, 267, 114902, 2020.
• [2] Zhang, Min; Hu, Guobiao; Wang, Junlei. “Bluff body with built‐in piezoelectric cantilever for flow‐induced energy harvesting”, International Journal of Energy Research, 2020.
• [3] Fevzi C., Bolat, Sinan Basaran, and Selim Sivrioglu, “Piezoelectric and electromagnetic hybrid energy harvesting with low-frequency vibrations of an aerodynamic profile under the air effect” Mechanical Systems and Signal Processing, 133, 106246, 2019.
• [4] Fevzi C., Bolat, and Selim Sivrioglu, “Energy harvesting using an aerodynamic blade element at resonant frequency with air excitation” Smart Structures and Systems, 24(3), pp. 379-390, 2019.
• [5] Fevzi C., Bolat, “An Experimental Analysis and Parametric Simulation of Vibration-Based Piezo-Aeroelastic Energy Harvesting Using an Aerodynamic Wing Profile” Arabian Journal for Science and Engineering, 1-8, 2020.
• [6] Javed, U. Abdelkefi, A. Akhtar, I, “An improved stability characterization for aeroelastic energy harvesting applications. Commun”, Nonlinear Sci. Numer. Simul., 36, pp. 252–265, 2016
• [7] Erturk, A. Vieira, W.G.R. De Marqui Jr., C. Inman, D.J., “On the energy harvesting potential of piezoaeroelastic systems”, Appl. Phys. Lett., 96(18), 184103, 2010.
• [8] Bibo, A. Daqaq, M.F., “Energy harvesting under combined aerodynamic and base excitations”, J. Sound Vib., 332(20), pp. 5086–5102, 2013.
• [9] Wang, Junlei, et al., “High-performance piezoelectric wind energy harvester with Y-shaped attachments”, Energy conversion and management, 181, pp. 645-652, 2019.
• [10] Raju, S. Srinivasulu, et al., “An effective energy harvesting in low frequency using a piezo-patch cantilever beam with tapered rectangular cavities”, Sensors and Actuators A: Physical, 297, 111522, 2019.
• [11] Xie, X. D., A. Carpinteri, and Q. Wang, “A theoretical model for a piezoelectric energy harvester with a tapered shape”, Engineering Structures, 144, pp. 19-25, 2017.
• [12] Raju, S. Srinivasulu, M. Umapathy, and G. Uma, “High-output piezoelectric energy harvester using tapered beam with cavity” Journal of Intelligent Material Systems and Structures, 29(5), pp. 800-815, 2018.
• [13] Raju, S. Srinivasulu, M. Umapathy, and G. Uma, “Design and analysis of high output piezoelectric energy harvester using non uniform beam”, Mechanics of Advanced Materials and Structures, 1-10, 2018.
• [14] Matova, S. P., et al., “Effect of length/width ratio of tapered beams on the performance of piezoelectric energy harvesters”, Smart Materials and Structures, 22(7), 075015, 2013.
• [15] Zhang, Jinfeng, et al., “A study on a near‐shore cantilevered sea wave energy harvester with a variable cross section”, Energy Science & Engineering, 7(6), pp. 3174-3185, 2019.
• [16] Elvin, Niell, and Alper Erturk, eds. Advances in energy harvesting methods. Springer Science & Business Media, 2013.
• [17] Yang, Zhengbao, et al., “High-performance piezoelectric energy harvesters and their applications”, Joule, 2(4), pp. 642-697, 2018.