Araştırma Makalesi
BibTex RIS Kaynak Göster

Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber

Yıl 2020, , 819 - 831, 01.10.2020
https://doi.org/10.16984/saufenbilder.726905

Öz

The feasibility of beam-shaping of a Ku-Band horn as a transmitting (Tx) antenna by mounting two different versions of lenses which are kind of Fresnel Zone Plates (FZP) is studied. The designed and fabricated geometrical structures offer a simpler approach building Fresnel Zone Plates by using an electromagnetic wave absorber and diffractive optic material. The diffractive optic material, paraffin, forms a set of alternating open and opaque annular zones on a flat surface, based on the design principles of Fresnel Zone Plates. An electromagnetic wave absorber covers the top surface of the formed paraffin, but not including the grooves. Thereafter, the Fresnel Zone plates are suitably attached in front of the transmitter horn antenna, located in the far-field region of a receiving antenna. The half-power beam-widths for the horn antenna (unloaded) and with two types of lenses are investigated. The results indicate that Fresnel zone plate structures can play a role suppressing side lobes in H-plane so that the effective radiation is to be significantly concentrated.

Kaynakça

  • L. C. J. Baggen, “The Fresnel Zone Plate Antenna: design and analysis”, Eindhoven Univ. of Tech., Eindhoven, Netherlands, 1992.
  • G. I. Greisukh, E. G. Ezhov, A. V. Kalashnikov, I.A. Levin and S.A. Stepanov, “The efficiency of relief-phase diffractive elements at a small number of Fresnel zones,” Optics and Spectroscopy, vol. 113, no. 4, pp. 425-430, 2012.
  • J.C. Wiltse, “Recent developments in Fresnel zone plate antennas at microwave/millimeter-wave,” In Optical Devices and Methods for Microwave/Millimeter-wave and Frontier Applications, vol. 3464, pp. 146-154, 1998.
  • H. D. Hristov, “Fresnel Zones in Wireless Links, Zone Plate Lenses and Antennas,” Artech House, Inc., 2000.
  • J. Pourahmadazar, S. Sahebghalam, S.A. Aghdam, M.A. Nouri, “Millimeter-wave Fresnel zone plate lens design using perforated 3D printing material,” In 2018 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), pp. 1-3, 2018.
  • S. M. Stout‐Grandy, A. Petosa, I. V. Minin, O. V. Minin, J. S. Wight, “Novel reflector‐backed Fresnel zone plate antenna,” Microwave and Optical Technology Letters, vol. 49, no. 12, pp. 3096-3098, 2007.
  • A. Jouade, J. Bor, M. Himdi, O. Lafond, “Millimeter-wave Fresnel zone plate lens with new technological process,” International Journal of Microwave and Wireless Technologies, vol. 9, no. 4, pp. 939-944, 2017.
  • X. Liu, Y. Y. Chen, Y. Ge, “Wideband High-Efficiency Fresnel Zone Plate Reflector Antennas Using Compact Subwavelength Dual-Dipole Unit Cells,” Progress in Electromagnetics Research, vol. 86, pp. 29-39, 2018.
  • L. C. J. Baggen, M. H. A. J. Herben, “Design procedure for a Fresnel-zone plate antenna,” Int. J. Infrared and Millimeter Waves, vol. 14, no. 6, pp. 1341-1352, 1993.
  • J. C. Wiltse, “Millimeter-wave Fresnel zone plate antenna,” Millimeter and Microwave Engineering for Communications and Radar: A Critical Review, International Society for Optics and Photonics, vol. 10276, pp. 1027605, 1994.
  • I. Minin and O. Minin, “Diffractive optics and nanophotonics: Resolution below the diffraction limit,” Switzerland, Springer, 2015.
  • S. T. Bobrov, G. I. Greisukh and Y. G. Turkevich, “Design procedure for a Fresnel-zone plate antenna,” Mashinostroenie, pp. 223, 1986.
  • A. Teber, R. Bansal, I. S. Unver and Z. Mehmedi, “The measurement of microwave absorption characteristics of nanocomposites using a coaxial line technique,” Int. J. High Speed Electronics and Systems, vol. 27, no. 01n02, pp. 1840011, 2019.
  • A. Teber, K. Cil, T. Yilmaz, B. Eraslan, D. Uysal, G. Surucu, A. Baykal and R. Bansal, “Manganese and zinc spinel ferrites blended with multi-walled carbon nanotubes as microwave absorbing materials,” Aerospace, vol. 4, no. 1, pp. 2, 2017.
  • A. Teber, I.S. Unver, H. Kavas, B. Aktas and R. Bansal, “Knitted radar absorbing materials (RAM) based on nickel–cobalt magnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 406, pp. 228-232, 2016.
  • A. Teber, “Development of radar absorbing materials (RAMs) based on nano-structured magnetic materials and applications,” Dept. Elect. Eng., Univ. of Connecticut, Storrs, Connecticut, Doctoral Dissertation, pp. 1532, 2017.
  • A. Mahmoudi and R. Afzalzadeh, “Analysis, design and fabrication of centimeter-wave dielectric Fresnel zone plate lens and reflector,” The European Physical Journal-Applied Physics, vol. 32, no. 2, 2005.
  • E. Pettinelli, P. M. Barone, E. Mattei, A. Di Matteo, F. Soldovieri, A. S. Turk, A. K. Hocaoglu and A. A. Vertiy, “Archaeology and cultural heritage,” Subsurface Sensing, pp. 644-667, 2011.
  • R. E. Collins, “Antennas and radiowave propagation,” New York: McGraw-Hill, 1985.
  • C. Balanis, “Antenna theory analysis and design,” New Jersey: John Wiley & Sons. Inc., 2005.
  • D. N. Black and J. C. Wiltse, “Millimeterwave characteristics of phase-correcting Fresnel zone plates,” IEEE Transactions on Microwave Theory and Techniques, vol. 35, no. 12, pp. 1122-1129, 1987.
Yıl 2020, , 819 - 831, 01.10.2020
https://doi.org/10.16984/saufenbilder.726905

Öz

Kaynakça

  • L. C. J. Baggen, “The Fresnel Zone Plate Antenna: design and analysis”, Eindhoven Univ. of Tech., Eindhoven, Netherlands, 1992.
  • G. I. Greisukh, E. G. Ezhov, A. V. Kalashnikov, I.A. Levin and S.A. Stepanov, “The efficiency of relief-phase diffractive elements at a small number of Fresnel zones,” Optics and Spectroscopy, vol. 113, no. 4, pp. 425-430, 2012.
  • J.C. Wiltse, “Recent developments in Fresnel zone plate antennas at microwave/millimeter-wave,” In Optical Devices and Methods for Microwave/Millimeter-wave and Frontier Applications, vol. 3464, pp. 146-154, 1998.
  • H. D. Hristov, “Fresnel Zones in Wireless Links, Zone Plate Lenses and Antennas,” Artech House, Inc., 2000.
  • J. Pourahmadazar, S. Sahebghalam, S.A. Aghdam, M.A. Nouri, “Millimeter-wave Fresnel zone plate lens design using perforated 3D printing material,” In 2018 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), pp. 1-3, 2018.
  • S. M. Stout‐Grandy, A. Petosa, I. V. Minin, O. V. Minin, J. S. Wight, “Novel reflector‐backed Fresnel zone plate antenna,” Microwave and Optical Technology Letters, vol. 49, no. 12, pp. 3096-3098, 2007.
  • A. Jouade, J. Bor, M. Himdi, O. Lafond, “Millimeter-wave Fresnel zone plate lens with new technological process,” International Journal of Microwave and Wireless Technologies, vol. 9, no. 4, pp. 939-944, 2017.
  • X. Liu, Y. Y. Chen, Y. Ge, “Wideband High-Efficiency Fresnel Zone Plate Reflector Antennas Using Compact Subwavelength Dual-Dipole Unit Cells,” Progress in Electromagnetics Research, vol. 86, pp. 29-39, 2018.
  • L. C. J. Baggen, M. H. A. J. Herben, “Design procedure for a Fresnel-zone plate antenna,” Int. J. Infrared and Millimeter Waves, vol. 14, no. 6, pp. 1341-1352, 1993.
  • J. C. Wiltse, “Millimeter-wave Fresnel zone plate antenna,” Millimeter and Microwave Engineering for Communications and Radar: A Critical Review, International Society for Optics and Photonics, vol. 10276, pp. 1027605, 1994.
  • I. Minin and O. Minin, “Diffractive optics and nanophotonics: Resolution below the diffraction limit,” Switzerland, Springer, 2015.
  • S. T. Bobrov, G. I. Greisukh and Y. G. Turkevich, “Design procedure for a Fresnel-zone plate antenna,” Mashinostroenie, pp. 223, 1986.
  • A. Teber, R. Bansal, I. S. Unver and Z. Mehmedi, “The measurement of microwave absorption characteristics of nanocomposites using a coaxial line technique,” Int. J. High Speed Electronics and Systems, vol. 27, no. 01n02, pp. 1840011, 2019.
  • A. Teber, K. Cil, T. Yilmaz, B. Eraslan, D. Uysal, G. Surucu, A. Baykal and R. Bansal, “Manganese and zinc spinel ferrites blended with multi-walled carbon nanotubes as microwave absorbing materials,” Aerospace, vol. 4, no. 1, pp. 2, 2017.
  • A. Teber, I.S. Unver, H. Kavas, B. Aktas and R. Bansal, “Knitted radar absorbing materials (RAM) based on nickel–cobalt magnetic materials,” Journal of Magnetism and Magnetic Materials, vol. 406, pp. 228-232, 2016.
  • A. Teber, “Development of radar absorbing materials (RAMs) based on nano-structured magnetic materials and applications,” Dept. Elect. Eng., Univ. of Connecticut, Storrs, Connecticut, Doctoral Dissertation, pp. 1532, 2017.
  • A. Mahmoudi and R. Afzalzadeh, “Analysis, design and fabrication of centimeter-wave dielectric Fresnel zone plate lens and reflector,” The European Physical Journal-Applied Physics, vol. 32, no. 2, 2005.
  • E. Pettinelli, P. M. Barone, E. Mattei, A. Di Matteo, F. Soldovieri, A. S. Turk, A. K. Hocaoglu and A. A. Vertiy, “Archaeology and cultural heritage,” Subsurface Sensing, pp. 644-667, 2011.
  • R. E. Collins, “Antennas and radiowave propagation,” New York: McGraw-Hill, 1985.
  • C. Balanis, “Antenna theory analysis and design,” New Jersey: John Wiley & Sons. Inc., 2005.
  • D. N. Black and J. C. Wiltse, “Millimeterwave characteristics of phase-correcting Fresnel zone plates,” IEEE Transactions on Microwave Theory and Techniques, vol. 35, no. 12, pp. 1122-1129, 1987.
Toplam 21 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Elektrik Mühendisliği, Malzeme Üretim Teknolojileri
Bölüm Araştırma Makalesi
Yazarlar

Ahmet Teber 0000-0002-7361-2302

Yayımlanma Tarihi 1 Ekim 2020
Gönderilme Tarihi 25 Nisan 2020
Kabul Tarihi 17 Haziran 2020
Yayımlandığı Sayı Yıl 2020

Kaynak Göster

APA Teber, A. (2020). Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber. Sakarya University Journal of Science, 24(5), 819-831. https://doi.org/10.16984/saufenbilder.726905
AMA Teber A. Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber. SAUJS. Ekim 2020;24(5):819-831. doi:10.16984/saufenbilder.726905
Chicago Teber, Ahmet. “Investigation of Beam Width Shaping of a Ku-Band Horn Antenna Using a Diffractive Optic Element and an Electromagnetic Wave Absorber”. Sakarya University Journal of Science 24, sy. 5 (Ekim 2020): 819-31. https://doi.org/10.16984/saufenbilder.726905.
EndNote Teber A (01 Ekim 2020) Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber. Sakarya University Journal of Science 24 5 819–831.
IEEE A. Teber, “Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber”, SAUJS, c. 24, sy. 5, ss. 819–831, 2020, doi: 10.16984/saufenbilder.726905.
ISNAD Teber, Ahmet. “Investigation of Beam Width Shaping of a Ku-Band Horn Antenna Using a Diffractive Optic Element and an Electromagnetic Wave Absorber”. Sakarya University Journal of Science 24/5 (Ekim 2020), 819-831. https://doi.org/10.16984/saufenbilder.726905.
JAMA Teber A. Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber. SAUJS. 2020;24:819–831.
MLA Teber, Ahmet. “Investigation of Beam Width Shaping of a Ku-Band Horn Antenna Using a Diffractive Optic Element and an Electromagnetic Wave Absorber”. Sakarya University Journal of Science, c. 24, sy. 5, 2020, ss. 819-31, doi:10.16984/saufenbilder.726905.
Vancouver Teber A. Investigation of Beam Width Shaping of a Ku-band Horn Antenna using a Diffractive Optic Element and an Electromagnetic Wave Absorber. SAUJS. 2020;24(5):819-31.

30930 This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.