Thermo-hydraulic effects of vortex generator pairs in a crossflow channel with a transverse-jet flow

Yıl 2019, Cilt: 23 Sayı: 5, 942 - 963, 01.10.2019

Beşir Kok

https://doi.org/10.16984/saufenbilder.558877

Öz

The use of
passive obstacles to control the hydraulic and thermal behavior of fluids is an
application in many industrial mechanisms. In this study, flow and thermal
oscillation behaviors in a crossflow channel with a transverse jet flow were
investigated numerically. Passive vortex
generator(VG) pairs with different geometric properties were used in the test
channel and their thermo-hydraulic effects in the active mixing zone were
discussed. In addition, nine boundary conditions, which
are the function of velocity and temperature, have been applied to the
computational domain. The results showed
that VG pairs with different geometric properties do not provide an effective
improvement in thermal mixing behavior, but they are very successful in removing
thermal oscillations from the channel walls. Momentum
and temperature differences between cross flow and jet flow are the secondary
parameters of the study. When the jet velocity was gradually increased by
keeping the crossflow rate constant, improvements in thermal mixing performance
were observed but in this case, it was
also seen that thermal oscillations reached the channel walls. As the jet temperature
increased, a decrease in thermal mixing performance was observed due to the
increased hot fluid dominance in the duct. 

Anahtar Kelimeler

Transverse jet, Crossflow, Thermal mixing, LES, Vortex generator

Kaynakça

• [1] International Atomic Energy Agency(IAEA), Liquid Metal Cooled Reactors: Experience in Design and Operation, Vienna, Austria, 2007.
• [2] E. Sakai, T. Takahashi, H. Watanabe, "International Journal of Heat and Mass Transfer Large-eddy simulation of an inclined round jet issuing into a crossflow," International Journal of Heat and Mass Transfer., Vol. 69, pp. 300–311, 2014.
• [3] R. Deng, T. Setoguchi, H. Dong, "Large eddy simulation of shock vector control using bypass flow passage," International Journal of Heat and Fluid Flow., Vol. 62, pp. 474–481, 2016.
• [4] C. Liu, Z. Wang, H. Wang, M. Sun, "Mixing characteristics of a transverse jet injection into supersonic crossflows through an expansion wall," Acta Astronautica., Vol. 129, pp. 161–173, 2016.
• [5] G.Y. Chuang, Y.M. Ferng, "Experimentally investigating the thermal mixing and thermal stripping characteristics in a T-junction," Applied Thermal Engineering., Vol. 113, pp. 1585–1595, 2017.
• [6] G.Y. Chuang, Y.M. Ferng, "Investigating effects of injection angles and velocity ratios on thermal-hydraulic behavior and thermal striping in a T-junction," International Journal of Thermal Sciences., Vol. 126, pp. 74–81, 2018.
• [7] A. Mcguinn, D.I. Rylatt, T.S.O. Donovan, "Heat transfer enhancement to an array of synthetic air jets by an induced crossflow," Applied Thermal Engineering., Vol. 103, pp. 996–1003, 2016.
• [8] C. Wang, L. Wang, B. Sundén, "International Journal of Heat and Mass Transfer A novel control of jet impingement heat transfer in cross-flow by a vortex generator pair," International Journal of Heat and Mass Transfer., Vol. 88, pp. 82–90, 2015.
• [9] C. Wang, L. Luo, L. Wang, B. Sundén, "International Journal of Heat and Mass Transfer Effects of vortex generators on the jet impingement heat transfer at different cross-flow Reynolds numbers," International Journal of Heat and Mass Transfer., Vol. 96, pp. 278–286, 2016.
• [10] D.G. Kang, H. Na, C.Y. Lee, "Detached eddy simulation of turbulent and thermal mixing in a T-junction," Annals of Nuclear Energy., Vol. 124, pp. 245–256, 2019.
• [11] M. Zhou, R. Kulenovic, E. Laurien, "T-junction experiments to investigate thermal-mixing pipe flow with combined measurement techniques," Applied Thermal Engineering., Vol. 150, pp. 237–249, 2019.
• [12] M. Kamaya, A. Nakamura, "Thermal stress analysis for fatigue damage evaluation at a mixing tee," Nuclear Engineering and Design., Vol. 241, pp. 2674– 2687, 2011.
• [13] J. Galpin, J.P. Simoneau, "Large Eddy Simulation of a thermal mixing tee in order to assess the thermal fatigue," International Journal of Heat and Fluid Flow., Vol. 32, pp. 539–545, 2011.
• [14] Y. Shao, S. Deng, Z. Wang, Y. Zhang, P. Lu, L. Zhao, W. Xu, D. Zhao, "Analysis of pressure drop in T-junction and its effect on thermodynamic cycle efficiency," Applied Energy., Vol. 231, pp. 468–480, 2018.
• [15] H. Ayhan, C.N. Sökmen, "CFD Modelıng of Thermal Mıxıng In T-Junctıon: Effect of Branch Pıpe Dıameter Ratıo, in: The 15th International Topical Meeting on Nuclear Reactor Thermal - Hydraulics," NURETH-15, Italy, p. 12. 2013.
• [16] B. Kok, M. Uyar, Y. Varol, A. Koca, H.F. Oztop, "Analyzing of thermal mixing phenomena in a rectangular channel with twin jets by using artificial neural network," Nuclear Engineering and Design. Vol. 265, pp. 554–565, 2013.
• [17] B. Kok, Y. Varol, H. Ayhan, H.F. Oztop, "Experimental and computational analysis of thermal mixing characteristics of a coaxial jet," Experimental Thermal and Fluid Science., Vol. 82, pp. 276–286, 2017.
• [18] B. Kok, Y. Varol, H. Ayhan, H.F. Oztop, S.G. Demiryurek, "Experimental Investigation of Thermal-Mixing Phenomena of a Coaxial Jet with Cylindrical Obstacles," Journal of Thermophysics and Heat Transfer., Vol. 32, pp. 1–11, 2018.
• [19] B. Kok, M. Firat, H.F. Oztop, Y. Varol, "A numerical study on thermal mixing in narrow channels inserted rectangular bodies," International Communications in Heat and Mass Transfer., Vol. 44, pp. 69–76, 2013.
• [20] B. Kok, Y. Varol, H.F. Oztop, A. Koca, "Analysis of thermal mixing in circle shaped body inserted inclined channel," Experimental Thermal and Fluid Science.,Vol. 68, pp. 1–10, 2015.
• [21] Y. Varol, B. Kok, H.F. Oztop, I. Turkbay, "An experimental study on thermal mixing in a square body inserted inclined narrow channels," International Communications in Heat and Mass Transfer., Vol. 39, pp. 1245–1252, 2012.
• [22] Y. Varol, B. Kok, H. Ayhan, H.F. Oztop, "Experimental study and Large Eddy Simulation of thermal mixing phenomena of a parallel jet with perforated obstacles," International Journal of Thermal Sciences., Vol. 111, pp. 1–17, 2017.
• [23] B. Kok, Y. Varol, H. Ayhan, H.F. Oztop, "Experimental study and large Eddy simulation of a coaxial jet with perforated obstacles to control thermal mixing characteristics," Experimental Heat Transfer., Vol. 31, pp. 161–182, 2018.
• [24] J. Westin, F. Alavyoon, L. Andersson, P. Veber, M. Henriksson, C. Andersson, "Experiments and Unsteady CFD-Calculations of Thermal Mixing in a T-Junction, Proceedings of OECD/NEA/IAEA Workshop on the Benchmarking of CFD Codes for Application to Nuclear Reactor Safety," CFD4NRS, Munich Germany., Vol. 1, pp. 1–15, 2006.
• [25] I. ANSYS, ANSYS Fluent 15.0 User’s Guide, ANSYS, Inc., Canonsburg, 2014. http://www.ansys.com.
• [26] S.J. Wang, S. Devahastin, A.S. Mujumdar, "Effect of temperature difference on flow and mixing characteristics of laminar confined opposing jets,"Applied Thermal Engineering., Vol. 26, pp. 519–529, 2006.