Performance and Heat Release Rate of a Diesel Engine using Sunflower Methyl Esters and Diesel Fuel Blends in experimental comparison

Yıl 2019, Cilt: 23 Sayı: 6, 1279 - 1288, 01.12.2019

Aykut Safa

https://doi.org/10.16984/saufenbilder.576624

Öz

Biodiesel fuels are
among the leading renewable alternative fuels, available to implement on diesel
engines simply. Testing biodiesel fuels on engines, results similar to nominal
engine performance data are reported in the literature, since having chemical
properties very close to diesel fuel. Methyl/Ethyl esters (Biodiesel fuels), of
various oils extracted from vegetables or animals, are used by many researchers
on various types of engines and for various testing conditions. In the study,
effects of sunflower oil methyl esters on engine performance, heat release rate
and indicated engine parameters are investigated experimentally on a single
cylinder, DI Diesel engine. Tests are performed with diesel fuel and B50 blend
fuel, consisting of 50% diesel and 50% biodiesel, fuels at full load condition
and at different speeds. Engine brake torque, brake power, brake specific fuel
consumption, brake thermal efficiency, heat release rate, and indicated engine
parameters are calculated from test data, and the results obtained using diesel
fuel and B50 blend fuel are compared. Although some worsening on performance
data and heat release rate on B50 side, results are very close to each other.

Anahtar Kelimeler

Diesel Engine performance, Sunflower Biodiesel Fuel Blends, Heat Release Rate analysis

Kaynakça

• Vezir Ayhan, Serdar Tunca, Experimental investigation on using emulsified fuels with different biofuel additives in a DI diesel engine for performance and emissions, Applied Thermal Engineering 129 (2018) 841–854, https://doi.org/10.1016/j.applthermaleng.2017.10.106.
• Bjorn S. Santos, Sergio C. Capareda, and Jewel A. Capunitan, Sunflower Methyl Ester as an Engine Fuel: Performance Evaluation and Emissions Analysis, ISRN Renewable Energy, Volume 2013, Article ID 352024, 12 pages, http://dx.doi.org/10.1155/2013/352024
• Estelvina Rodríguez Portillo, Araceli Amaya Chávez, Arturo Colín Cruz and Rubí Romero Romero, Biofuels - Status and Perspective: Chapter 13: Qualitative Characteristics of Biodiesel Obtained from Sunflower Oil, IntechOpen, http://dx.doi.org/10.5772/59673.
• Richard J Pearson, James WG Turner , Arthur Bell , Stefan de Goede , Chris Woolard and Martin H Davy, Iso-stoichiometric fuel blends: characterisation of physicochemical properties for mixtures of gasoline, ethanol, methanol and water, Proc IMechE Part D: J Automobile Engineering 2015, Vol. 229(1) 111–139 IMechE 2014, DOI: 10.1177/0954407014529424.
• S. Kent Hoekman, Amber Broch, Curtis Robbins, Eric Ceniceros, Mani Natarajan, Review of biodiesel composition, properties, and specifications, Renewable and Sustainable Energy Reviews 16 (2012) 143–169, doi:10.1016/j.rser.2011.07.143.
• Cenk Sayin, Murat Ilhan, Mustafa Canakci, Metin Gumus, Effect of injection timing on the exhaust emissions of a diesel engine using diesel–methanol blends, Renewable Energy 34 (2009) 1261–1269.
• G.K. Prashant, D.B. Lata, P.C. Joshi , Investigations on the effect of methanol blend on the combustion parameters of dual fuel diesel engine, Applied Thermal Engineering 103 (2016) 187–194.
• Ayhan Demirbas, Relationships derived from physical properties of vegetable oil and biodiesel fuels, Fuel 87 (2008) 1743–1748.
• Ankush Prajapati, Kuladeep Kumar Pandey, Devesh Kumar, Performance and Study of Diesel Engine Using Blends of Sunflower Oil with Diesel, International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 4 Issue IV, April 2016.
• Ahmet Necati Ozsezen, Mustafa Canakci, Determination of performance and combustion characteristics of a diesel engine fueled with canola and waste palm oil methyl esters, Energy Conversion and Management 52 (2011) 108–116. doi:10.1016/j.enconman.2010.06.049.
• S. Kirankumar, N. Govind, Performance, Emission and Combustion Evaluation of Diesel Engine Using Methyl Esters of Sunflower Oil. Journal of Mechanical Engineering Research and Developments, Vol. 41, No. 1, 2018, pp. 1-8. DOI: 10.7508/jmerd.2018.01.001.
• Ertan Alptekin, Mustafa Canakci, Determination of the density and the viscosities of biodiesel– diesel fuel blends, Renewable Energy 33 (2008) 2623– 2630.
• S. Lahane and K. A. Subramanian, Effect of different percentages of biodiesel–diesel blends on injection, spray, combustion, performance, and emission characteristics of a diesel engine, Fuel, vol. 139, pp. 537–545, Jan. 2015.
• T. K. Gogoi and D. C. Baruah, A cycle simulation model for predicting the performance of a diesel engine fuelled by diesel and biodiesel blends, Energy, vol. 35, no. 3, pp. 1317–1323, Mar. 2010.
• Asad and M. Zheng, Fast heat release characterization of a diesel engine, Int. J. Therm. Sci., vol. 47, no. 12, pp. 1688–1700, 2008.
• G. Abbaszadehmosayebi and L. Ganippa, Characterising Wiebe Equation for Heat Release Analysis based on Combustion Burn Factor ( C i ), Fuel, vol. 119, pp. 301–307, 2014.
• C. Vipavanich, S. Chuepeng, and S. Skullong, Heat release analysis and thermal efficiency of a single cylinder diesel dual fuel engine with gasoline port injection, Case Stud. Therm. Eng., vol. 12, no. February, pp. 143–148, 2018.
• S. Hu, H. Wang, C. Yang, and Y. Wang, Burnt fraction sensitivity analysis and 0-D modelling of common rail diesel engine using Wiebe function, Appl. Therm. Eng., vol. 115, pp. 170–177, Mar. 2017.
• Günter P. Merker, Christian Schwarz, Gunnar Stiesch, Frank Otto, Simulating Combustion Simulation of combustion and pollutant formation for engine-development, Springer-Verlag Berlin Heidelberg, Germany, 2006.