Physical Properties of Martensitic Phase Transformations in Fe - 18.79%Mn-4.53%Ni Alloys

Abstract

In this study, the microstructure and magnetic properties of martensite transformation induced with thermal effect were investigated in Fe-18.79%Mn- 4.53%Ni alloy. Microstructures of thermal induced martensite were observed with Scanning Electron Microscope (SEM) and it was observed that the amount of martensite was increased in the investigation of the microstructure when the amount of temperatures was increased different rates. Mössbauer spectroscopy was used to determine volume fraction of thermal-induced martensites formed in austenite phase. X-ray analysis is method was used to determine the changes in lattice parameters. 

Keywords

• Martensitic phase transformation
• thermal-induced martensite
• Mössbauer spectroscopy
• SEM
• X-ray

Fe-%18,79Mn-%4,53Ni Alaşımında Termal Etki ile Oluşan Martensitik Faz Dönüşümlerinin Fiziksel Özelliklerinin İncelenmesi

Abstract

Bu çalışmada, Fe-%18,79Mn-%4,53Ni alaşımında termal etki ile oluşturulan martensitik faz dönüşümlerinin kristalografik ve manyetik özellikleri araştırıldı. Taramalı Elektron Mikroskobu (SEM) ile termal etkili martensitelerin mikroyapıları incelendi. Mikroyapı incelemelerinde, termal etkili martensite yapı miktarının uygulanan sıcaklık derecelerinin artması ile arttığı gözlendi. Austenite faz içerisinde oluşan termal etkili martensite fazın hacim yüzdeleri Mössbauer Spektrometresi tekniği yoluyla belirlendi. X-ışını tekniği ile örgü parametrelerinde meydana gelen değişimler tespit edildi.

Keywords

• Martensitik faz Dönüşümü
• termal etkili martensite
• Mössbauer spektrometresi
• SEM
• X-ray

References

1. [1] Cristian J.W., 2002. The theory of transformations in metals and alloys, Pergamon Press, London, pp. 977-990.
2. [2] Kırındı T., Sarı U., 2009. Influence of Mn content on the magnetic properties and microstructure in Fe–Mn–Mo alloys, Journal of Alloys and Compounds, 488: 129–133.
3. [3] Porter D.A., Easterling K.E., 1992. Phase transformations in metals and alloys, Chapman&Hall Press, pp. 410-416.
4. [4] Bergeon N., Guenin G., Esnouf C., 1998. Microstructural analysis of the stress-induced ε martensite in Fe-Mn-Si-Cr-Ni shape memory alloy: Part II : Transformation reversibility, Matterial Science Engineer A, 242: 87-95.
5. [5] Wen Y.H., Yan M., Li N., 2004. Effects of carbon addition and aging on the shape memory effect of Fe-Mn-Si-Cr-Ni alloys, Scripta Materilia, 50: 441-444.
6. [6] Hirth J.P., Lothe J., 1982. Theory of dislocations, John Willey&Sons, pp. 812-817.
7. [7] Kakeshita T., Kuroiwa K., Shimizu K., Ikeda T., Yamagishi A., Date M., 1993. Effect of magneticfields on athermal and isothermal martensitic transformations in Fe-Ni-Mn alloys, Materials Transactions, JIM, 34(5): 415-422.
8. [8] Nishiyama Z., 1978. Martensitic transformations, Academic Press London, pp. 263-283.

9. [9] Kajiwara S., 1999. Characteristic features of shape memory effect and related transformation behavior in Fe-based alloys, Materials Science and Engineering, A273-275: 67-88.
10. [10] Qin Z., Zhang Y.,1998. Mössbauer effect study of antiferromagnetic Fe–Mn–Si alloys, Hyperfine Interactions, 116: 225–235.
11. [11] Bandyopadhyay D., Suwas S., Singru M., Bhargava S., 1998. Mössbauer spectroscopic study of heat-treated and control-cooled Fe3Al alloys, Journal of Materials Science, 33: 109-116.
12. [12] Dikici M., 2013. Katıhal fiziği, Seçkin Yayıncılık, Ankara, pp.49-53.
13. [13] Haseeb A.S., Nishida M.A., T.,Masuda M., Hayashi Y., 2001. Mossbauer investigation on electrodeposited Fe-C and Fe-Ni-C alloys, Scripta Mater, 44: 519-523.
14. [14] Kajiwara S., 1984. Continuous observation of isothermal martensite formation in Fe-Ni-Mn alloys, Acta Metallurgica, 32: 407–413.
15. [15] Sarı U., Kırındı T., 2011. Effect of Mn content on the austenite-martensite phases and magnetic properties in Fe-Mn-Co alloys, Materials Chemistry and Physics, 130: 738-742.