Araştırma Makalesi
BibTex RIS Kaynak Göster

Farklı Restoratif Materyallerin Renk Stabilitesinin Değerlendirilmesi

Yıl 2024, , 1 - 4, 26.04.2024
https://doi.org/10.15311/selcukdentj.1313181

Öz

Amaç: Bu çalışmanın amacı çocuk diş hekimliğinde sıklıkla kullanılan restoratif materyallerin (Filtek z550, EverX Posterior, Dyract XP, EQUIA Forte Fill) yaşlandırılan içecekler (kola, vişne suyu) ile yaşlandırıldıktan sonra renk değişimlerinin değerlendirilmesidir. çocuklar ve ergenler günlük yaşamlarında sıklıkla tüketirler.
Gereç ve Yöntemler: Dört farklı restoratif materyal; nanohibrit kompozit (Filtek Z550), cam elyaf takviyeli bulk fill kompozit (EverX Posterior), poliasit modifiye kompozit reçine (Dyract XP) ve cam hibrit cam iyonomer siman (EQUIA Forte Fill) kullanıldı. 2 mm kalınlığında ve 10 mm çapındaki pleksiglas kalıplar kullanılarak her malzeme için toplam 120 numune hazırlandı. Her gruptan toplam 30 adet örnek kola, vişne suyu ve distile su içerisine daldırılmak üzere 3 gruba (n=10) ayrıldı. İlk renk ölçümlerinden sonra örnekler 7. ve 14. gün içeceklerde saklandı. 7. ve 14. günlerden sonra renk değişim değerleri (ΔE) hesaplandı.
Bulgular: Malzemelerin ΔE değerleri incelendiğinde EQUIA Forte Fill grubunun en yüksek renk değişimine sahip olduğu, Filtek z550 grubunun ise en düşük renk değişimine sahip olduğu görülmüştür.
Sonuç: Cam hibrit GIC, tüm zaman dilimlerinde ve içeceklerde en belirgin renk değişimini göstermiştir. Test edilen tüm reçine bazlı restoratif materyallerin kola ve vişne suyundaki ΔE değerleri 3.3'e eşit veya daha düşüktü. Bu nedenle, renk değişiklikleri görsel olarak algılanamadığı için klinik olarak kabul edilebilirdi.
Anahtar kelimeler: Bulk-Fill Kompozit Reçine, Cam Hibrit Cam İyonomer Siman, Renk Stabilitesi

Etik Beyan

Bu makale, sempozyum ya da kongrede sunulan bir tebliğin içeriği geliştirilerek ve kısmen değiştirilerek üretilmemiştir. Bu çalışma, yüksek lisans ya da doktora tezi esas alınarak hazırlanmamıştır. Bu çalışmanın hazırlanma sürecinde bilimsel ve etik ilkelere uyulduğu ve yararlanılan tüm çalışmaların kaynakçada belirtildiği beyan olunur.

Kaynakça

  • 1. Sikri VK. Color: Implications in dentistry. J Conserv Dent 2010;13(4):249.
  • 2. Brandt WC, Lacerda RF, Souza-Junior EJ, Sinhoreti MA. Effect of photoactivation mode on the hardness and bond strength of methacrylate-and Silorane monomer-based composites. J Adhes Dent. 2013;15(1):33-9.
  • 3. El-Damanhoury H, Platt J. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent 2014;39(4):374-82.
  • 4. Fill TEB. The bulk composite without compromises. Scientific Documentation Schaan, Liechtenstein: Ivoclar Vivadent 2011:1-20.
  • 5. Šalinović I, Stunja M, Schauperl Z, Verzak Ž, Malčić AI, Rajić VB. Mechanical properties of high viscosity glass ionomer and glass hybrid restorative materials. Acta Stomatol Croat 2019;53(2):125.
  • 6. Cildir SK, Sandalli N. Fluoride release/uptake of glass-ionomer cements and polyacid-modified composite resins. Dent Mater J 2005;24(1):92-7.
  • 7. Meyer J, Cattani-Lorente M, Dupuis V. Compomers: between glass-ionomer cements and composites. Biomaterials 1998;19(6):529-39.
  • 8. Nasim I, Neelakantan P, Sujeer R, Subbarao C. Color stability of microfilled, microhybrid and nanocomposite resins—an in vitro study. J Dent 2010;38:e137-e42.
  • 9. Iazzetti G, Burgess J, Gardiner D, Ripps A. Color stability of fluoride-containing restorative materials. Oper Dent 2000;25(6):520-5.
  • 10. Tanthanuch S, Kukiattrakoon B, Eiam‐O‐Pas K, Pokawattana K, Pamanee N, Thongkamkaew W, et al. Surface changes of various bulk‐fill resin‐based composites after exposure to different food‐simulating liquid and beverages. J Esthet Restor Dent 2018;30(2):126-35.
  • 11. Mansouri SA, Zidan AZ. Effect of water sorption and solubility on color stability of bulk-fill resin composite. J Contemp Dent Pract 2018;19(9):1129-34.
  • 12. Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent 2012;40:e57-e63.
  • 13. Seghi RR, Hewlett E, Kim J. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain. J Dent Res 1989;68(12):1760-4.
  • 14. Materials CoD, Devices. Revised American dental association specification no. 12 for denture base polymers. The Journal of the American Dental Association 1975;90(2):451-8.
  • 15. Brook A, Smith R, Lath D. The clinical measurement of tooth colour and stain. Int Dent J 2007;57(5):324-30. 16. Bagheri R, Burrow M, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33(5):389-98.
  • 17. Ruyter I, Nilner K, Möller B. Color stability of dental composite resin materials for crown and bridge veneers. Dent Mater 1987;3(5):246-51.
  • 18. Cattani-Lorente M-A, Dupuis V, Payan J, Moya F, Meyer J-M. Effect of water on the physical properties of resin-modified glass ionomer cements. Dent Mater 1999;15(1):71-8.
  • 19. Čulina MZ, Rajić VB, Šalinović I, Klarić E, Marković L, Ivanišević A. Influence of pH Cycling on Erosive Wear and Color Stability of High-Viscosity Glass Ionomer Cements. Materials 2022;15(3):923.
  • 20. Hotwani K, Thosar N, Baliga S. Comparative in vitro assessment of color stability of hybrid esthetic restorative materials against various children's beverages. J Conserv Dent 2014;17(1):70.
  • 21. Mustafa R, Alshali RZ, Silikas N. The effect of desiccation on water sorption, solubility and hygroscopic volumetric expansion of dentine replacement materials. Dent Mater 2018;34(8):205-13.
  • 22. Manabe A, Kato Y, Finger WJ, Kanehira M, Komatsu M. Discoloration of coating resins exposed to staining solutions in vitro. Dent Mater J 2009;28(3):338-43.
  • 23. Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004;20(6):530-4.
  • 24. Ertas E, Gueler AU, Yuecel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J 2006;25(2):371-6.
  • 25. Soares-Geraldo D, Scaramucci T, Steagall-Jr W, Braga SRM, Sobral MAP. Interaction between staining and degradation of a composite resin in contact with colored foods. Braz Oral Res 2011;25:369-75.
  • 26. Karadaş M, Demirbuğa S. Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites. Meand Med Dent J 2017;18(3):199.

Evaluation of color Stability of Different Restorative Materials Used in Pediatric Dentistry

Yıl 2024, , 1 - 4, 26.04.2024
https://doi.org/10.15311/selcukdentj.1313181

Öz

Background: The aim of this study was to evaluate the color changes of restorative materials (Filtek z550, EverX Posterior, Dyract XP, EQUIA Forte Fill), which are frequently used in pediatric dentistry, after aging with beverages (cola, cherry juice) that children and adolescents frequently consume in their daily life.
Methods: Four different restorative materials; nanohybrid composite (Filtek Z550), glass fiber reinforced bulk fill composite (EverX Posterior), polyacid modified composite resin (Dyract XP) and glass hybrid glass ionomer cement (EQUIA Forte Fill) were used. A total of 120 samples were prepared for each material using plexiglass molds with a thickness of 2 mm and a diameter of 10 mm. A total of 30 samples from each group were divided into 3 group (n=10) to be immersed in cola, cherry juice and distilled water. After the initial color measurements, the samples were stored in beverages for 7th and 14th days. Color change values (ΔE) were calculated after 7th and 14th days.
Results: When the ΔE values of materials were examined, it was observed that EQUIA Forte Fill group had the highest color change and Filtek z550 group had the lowest color change.
Conclusion: The glass hybrid GIC showed the most distinct color change in all time periods and beverages. ΔE values in cola and cherry juice of all resin-based restorative materials tested were less than or equal to 3.3. Therefore, color changes were clinically acceptable as they were not visually perceptible
Key words: Bulk-Fill Composite Resin, Color Stability, Glass Hybrid Glass Ionomer Cement

Etik Beyan

This article is not the version of a presentation. This article has not been prepared on the basis of a master’s/ doctoral thesis. It is declared that during the preparation process of this study, scientific and ethical principles were followed and all the studies benefited are stated in the bibliography.

Kaynakça

  • 1. Sikri VK. Color: Implications in dentistry. J Conserv Dent 2010;13(4):249.
  • 2. Brandt WC, Lacerda RF, Souza-Junior EJ, Sinhoreti MA. Effect of photoactivation mode on the hardness and bond strength of methacrylate-and Silorane monomer-based composites. J Adhes Dent. 2013;15(1):33-9.
  • 3. El-Damanhoury H, Platt J. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent 2014;39(4):374-82.
  • 4. Fill TEB. The bulk composite without compromises. Scientific Documentation Schaan, Liechtenstein: Ivoclar Vivadent 2011:1-20.
  • 5. Šalinović I, Stunja M, Schauperl Z, Verzak Ž, Malčić AI, Rajić VB. Mechanical properties of high viscosity glass ionomer and glass hybrid restorative materials. Acta Stomatol Croat 2019;53(2):125.
  • 6. Cildir SK, Sandalli N. Fluoride release/uptake of glass-ionomer cements and polyacid-modified composite resins. Dent Mater J 2005;24(1):92-7.
  • 7. Meyer J, Cattani-Lorente M, Dupuis V. Compomers: between glass-ionomer cements and composites. Biomaterials 1998;19(6):529-39.
  • 8. Nasim I, Neelakantan P, Sujeer R, Subbarao C. Color stability of microfilled, microhybrid and nanocomposite resins—an in vitro study. J Dent 2010;38:e137-e42.
  • 9. Iazzetti G, Burgess J, Gardiner D, Ripps A. Color stability of fluoride-containing restorative materials. Oper Dent 2000;25(6):520-5.
  • 10. Tanthanuch S, Kukiattrakoon B, Eiam‐O‐Pas K, Pokawattana K, Pamanee N, Thongkamkaew W, et al. Surface changes of various bulk‐fill resin‐based composites after exposure to different food‐simulating liquid and beverages. J Esthet Restor Dent 2018;30(2):126-35.
  • 11. Mansouri SA, Zidan AZ. Effect of water sorption and solubility on color stability of bulk-fill resin composite. J Contemp Dent Pract 2018;19(9):1129-34.
  • 12. Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent 2012;40:e57-e63.
  • 13. Seghi RR, Hewlett E, Kim J. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain. J Dent Res 1989;68(12):1760-4.
  • 14. Materials CoD, Devices. Revised American dental association specification no. 12 for denture base polymers. The Journal of the American Dental Association 1975;90(2):451-8.
  • 15. Brook A, Smith R, Lath D. The clinical measurement of tooth colour and stain. Int Dent J 2007;57(5):324-30. 16. Bagheri R, Burrow M, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33(5):389-98.
  • 17. Ruyter I, Nilner K, Möller B. Color stability of dental composite resin materials for crown and bridge veneers. Dent Mater 1987;3(5):246-51.
  • 18. Cattani-Lorente M-A, Dupuis V, Payan J, Moya F, Meyer J-M. Effect of water on the physical properties of resin-modified glass ionomer cements. Dent Mater 1999;15(1):71-8.
  • 19. Čulina MZ, Rajić VB, Šalinović I, Klarić E, Marković L, Ivanišević A. Influence of pH Cycling on Erosive Wear and Color Stability of High-Viscosity Glass Ionomer Cements. Materials 2022;15(3):923.
  • 20. Hotwani K, Thosar N, Baliga S. Comparative in vitro assessment of color stability of hybrid esthetic restorative materials against various children's beverages. J Conserv Dent 2014;17(1):70.
  • 21. Mustafa R, Alshali RZ, Silikas N. The effect of desiccation on water sorption, solubility and hygroscopic volumetric expansion of dentine replacement materials. Dent Mater 2018;34(8):205-13.
  • 22. Manabe A, Kato Y, Finger WJ, Kanehira M, Komatsu M. Discoloration of coating resins exposed to staining solutions in vitro. Dent Mater J 2009;28(3):338-43.
  • 23. Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater 2004;20(6):530-4.
  • 24. Ertas E, Gueler AU, Yuecel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J 2006;25(2):371-6.
  • 25. Soares-Geraldo D, Scaramucci T, Steagall-Jr W, Braga SRM, Sobral MAP. Interaction between staining and degradation of a composite resin in contact with colored foods. Braz Oral Res 2011;25:369-75.
  • 26. Karadaş M, Demirbuğa S. Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites. Meand Med Dent J 2017;18(3):199.
Toplam 25 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Çocuk Diş Hekimliği
Bölüm Araştırma
Yazarlar

İrem İpek 0000-0002-3542-7122

Büşra Karaağaç Eskibağlar 0000-0003-0775-9274

Yayımlanma Tarihi 26 Nisan 2024
Gönderilme Tarihi 15 Haziran 2023
Yayımlandığı Sayı Yıl 2024

Kaynak Göster

Vancouver İpek İ, Karaağaç Eskibağlar B. Evaluation of color Stability of Different Restorative Materials Used in Pediatric Dentistry. Selcuk Dent J. 2024;11(1):1-4.