SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ

Özge Genç; Necla Demir

doi:10.15311/selcukdentj.815274

SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ

Abstract

Zirkonya seramiklerin yüksek estetik ve mekanik özellikleri ve biyouyumlu olmaları sebebiyle diş hekimliğinde kullanımları giderek artmaktadır. Restorasyonların klinik başarısındaki önemli faktörlerden birisi seramik, yapıştırma ajanı ve diş yapıları arasındaki bağlanma dayanımıdır. Adezyon, güçlü bir bağlanma dayanımı için gerekli faktörlerden biridir. Adezyon iki dental materyalin fizikokimyasal olarak yapışmasını ifade eder ve bu kavram diş hekimliğinde büyük önem taşır. Zirkonya restorasyonların simantasyonu için genellikle adeziv sistemler tercih edilmektedir. Adeziv simantasyon, kimyasal bağlantı ve mikromekanik kilitlenme ile restorasyonun dişe yapışmasını sağlar. Adeziv simantasyon ile tutuculuk artar, marjinal bütünlük sağlanır, mikro sızıntı azalır, restorasyonun kırılma direnci artar ve sekonder çürük riski önlenerek daha başarılı, uzun ömürlü restorasyonlar elde edilir. Kimyasal olarak stabil, silika içeriği olmayan zirkonya seramiklerin aside karşı dirençli olması sebebiyle, silika bazlı seramiklere uygulanan yüzey işlemleri zirkonya seramikler için uygun olmamaktadır. Bu nedenle zirkonya seramiklerle rezin simanlar arasında güvenilir bir bağlantı elde edilmesinde problemler yaşanmaktadır. Zirkonya seramikler ve rezin simanlar arasındaki bağlantıyı geliştirmek için çeşitli yüzey işlemi yöntemleri geliştirilmeye devam etmektedir. Bağlantıyı artırmak için seramik yüzeyine mekanik, kimyasal veya mekanik ve kimyasal yüzey işlemlerinin kombinasyonu şeklinde olan işlemler uygulanabilir. Uygulanan yüzey işlemleri sayesinde materyal yüzeyindeki temas alanı, materyalin yüzey enerjisi ve ıslanabilirliği artmış olur. Bu makalede rezin simanlar ve zirkonya seramikler arasındaki bağlanma dayanımını artırmak için uygulanan yüzey işlemlerinden bahsedilmiştir.

Keywords

References

1. Al-Amleh B, Lyons K, Swain M. Clinical trials in zirconia: a systematic review. J Oral Rehabil. 2010;37(8):641-52.
2. Lüthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, Hammerle CH. Strength and reliability of four-unit all-ceramic posterior bridges. Dent Mater. 2005;21(10):930-7.
3. Awad MM, Alqahtani H, Al-Mudahi A, Murayshed MS, Alrahlah A, Bhandi SH. Adhesive Bonding to Computer-aided Design/ Computer-aided Manufacturing Esthetic Dental Materials: An Overview. J Contemp Dent Pract. 2017;18(7):622-6.
4. Wong ACH, Tian T, Tsoi JKH, Burrow MF, Matinlinna JP. Aspects of adhesion tests on resin-glass ceramic bonding. Dent Mater. 2017;33(9):1045-55.
5. Vargas MA, Bergeron C, Diaz-Arnold A. Cementing all-ceramic restorations: recommendations for success. The Journal of the American Dental Association. 2011;142:20S-4S.
6. Uludamar A, Akalin B, Ozkan YK. Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıkları. Cumhuriyet Dental Journal. 2011;14(2):140-53.
7. Qualtrough AJ, Piddock V. Recent advances in ceramic materials and systems for dental restorations. Dental update. 1999;26(2):65-72.
8. Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials: Elsevier Health Sciences; 2012.

9. de Mello CC, Bitencourt SB, dos Santos DM, Pesqueira AA, Pellizzer EP, Goiato MC. The effect of surface treatment on shear bond strength between Y‐TZP and veneer ceramic: a systematic review and meta‐analysis. Journal of Prosthodontics. 2018;27(7):624-35.
10. Chen J, Matsumura H, Atsuta M. Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Operative Dentistry. 1998;23(5):250-7.
11. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. The Journal of prosthetic dentistry. 2003;89(3):268-74.
12. Addison O, Cao X, Sunnar P, Fleming GJ. Machining variability impacts on the strength of a ‘chair-side’CAD–CAM ceramic. Dental Materials. 2012;28(8):880-7.
13. Sevmez H, Güngör MB, Yılmaz H. Tam Seramik Restorasyonlarda Uygulanan Yüzey İşlemleri.
14. Bona AD, Anusavice KJ. Microstructure, composition, and etching topography of dental ceramics. International Journal of Prosthodontics. 2002;15(2).
15. Moravej‐Salehi E, Moravej‐Salehi E, Valian A. Surface topography and bond strengths of feldspathic porcelain prepared using various sandblasting pressures. Journal of investigative and clinical dentistry. 2016;7(4):347-54.
16. Hallmann L, Ulmer P, Lehmann F, Wille S, Polonskyi O, Johannes M, et al. Effect of surface modifications on the bond strength of zirconia ceramic with resin cement resin. Dental Materials. 2016;32(5):631-9.
17. Gomes AL, Castillo-Oyagüe R, Lynch CD, Montero J, Albaladejo A. Influence of sandblasting granulometry and resin cement composition on microtensile bond strength to zirconia ceramic for dental prosthetic frameworks. Journal of dentistry. 2013;41(1):31-41.
18. Re D, Augusti D, Augusti G, Giovannetti A. Early bond strength to low-pressure sandblasted zirconia: evaluation of a self-adhesive cement. Eur J Esthet Dent. 2012;7(2):164-75.
19. Attia A, Kern M. Effect of cleaning methods after reduced-pressure air abrasion on bonding to zirconia ceramic. Journal of Adhesive Dentistry. 2011;13(6).
20. Sato H, Yamada K, Pezzotti G, Nawa M, Ban S. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dental materials journal. 2008;27(3):408-14.
21. Tzanakakis E-GC, Tzoutzas IG, Koidis PT. Is there a potential for durable adhesion to zirconia restorations? A systematic review. The Journal of prosthetic dentistry. 2016;115(1):9-19.
22. Moon J-e, Kim S-h, Lee J-b, Ha S-r, Choi Y-s. The effect of preparation order on the crystal structure of yttria-stabilized tetragonal zirconia polycrystal and the shear bond strength of dental resin cements. Dental Materials. 2011;27(7):651-63.
23. Kulunk Ş, Kulunk T, Ural Ç, Kurt M, Baba S. Effect of air abrasion particles on the bond strength of adhesive resin cement to zirconia core. Acta Odontologica Scandinavica. 2011;69(2):88-94.
24. Zarone F, Sorrentino R, Vaccaro F, Traini T, Russo S, Ferrari M. Acid etching surface treatment of feldspathic, alumina and zirconia ceramics: a micromorphological SEM analysis. Int Dent South Afr. 2006;8(1):20-6.
25. Qeblawi DM, Muñoz CA, Brewer JD, Monaco Jr EA. The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement. The Journal of prosthetic dentistry. 2010;103(4):210-20.
26. El-Korashy DI, El-Refai DA. Mechanical properties and bonding potential of partially stabilized zirconia treated with different chemomechanical treatments. J Adhes Dent. 2014;16(4):365-76.
27. Menani LR, Farhat IA, Tiossi R, Ribeiro RF, Guastaldi AC. Effect of surface treatment on the bond strength between yttria partially stabilized zirconia ceramics and resin cement. The Journal of prosthetic dentistry. 2014;112(2):357-64.
28. Kutsch VK. Lasers in dentistry: comparing wavelengths. The Journal of the American Dental Association. 1993;124(2):49-54.
29. Kimura Y, Wilder‐Smith P, Matsumoto K. Lasers in endodontics: a review. International Endodontic Journal. 2000;33(3):173-85.
30. Hammad IA, Talic YF. Designs of bond strength tests for metal-ceramic complexes: review of the literature. Journal of Prosthetic Dentistry. 1996;75(6):602-8.
31. Coluzzi DJ. Fundamentals of dental lasers: science and instruments. Dental Clinics of North America. 2004;48(4):751-70, v.
32. Hakki SS, Berk G, Dundar N, Saglam M, Berk N. Effects of root planing procedures with hand instrument or erbium, chromium: yttrium–scandium–gallium–garnet laser irradiation on the root surfaces: a comparative scanning electron microscopy study. Lasers in medical science. 2010;25(3):345-53.
33. Liu D, Matinlinna JP, Tsoi JK-H, Pow EH, Miyazaki T, Shibata Y, et al. A new modified laser pretreatment for porcelain zirconia bonding. Dental Materials. 2013;29(5):559-65.
34. Asadzadeh N, Ghorbanian F, Ahrary F, Rajati Haghi H, Karamad R, Yari A, et al. Bond strength of resin cement and glass ionomer to Nd: YAG laser‐treated zirconia ceramics. Journal of Prosthodontics. 2019;28(4):e881-e5.
35. Ural Ç, Külünk T, Külünk Ş, Kurt M. The effect of laser treatment on bonding between zirconia ceramic surface and resin cement. Acta Odontologica Scandinavica. 2010;68(6):354-9.
36. Atsu SS, Kilicarslan MA, Kucukesmen HC, Aka PS. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. The Journal of prosthetic dentistry. 2006;95(6):430-6.
37. Kara O, Kara HB, Tobi ES, Ozturk AN, Kilic HS. Effect of various lasers on the bond strength of two zirconia ceramics. Photomedicine and Laser Surgery. 2015;33(2):69-76.
38. Aboushelib MN. Evaluation of zirconia/resin bond strength and interface quality using a new technique. Journal of Adhesive Dentistry. 2011;13(3):255.
39. Casucci A, Monticelli F, Goracci C, Mazzitelli C, Cantoro A, Papacchini F, et al. Effect of surface pre-treatments on the zirconia ceramic–resin cement microtensile bond strength. Dental materials. 2011;27(10):1024-30.
40. Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dental materials. 2008;24(5):633-8.
41. Derand T, Molin M, Kvam K. Bond strength of composite luting cement to zirconia ceramic surfaces. Dental Materials. 2005;21(12):1158-62.
42. Canullo L, Micarelli C, Bettazzoni L, Koçi B, Baldissara P. Zirconia-composite bonding after plasma of argon treatment. International Journal of Prosthodontics. 2014;27(3).
43. Kumbuloglu O, Lassila L, USER A, Toksavul S, Vallittu P. Shear bond strength of composite resin cements to lithium disilicate ceramics. Journal of Oral Rehabilitation. 2005;32(2):128-33.
44. Lung CYK, Kukk E, Matinlinna JP. Shear bond strength between resin and zirconia with two different silane blends. Acta Odontologica Scandinavica. 2012;70(5):405-13.
45. Attia A. Bond strength of three luting agents to zirconia ceramic-influence of surface treatment and thermocycling. Journal of Applied Oral Science. 2011;19(4):388-95.
46. Piascik J, Swift E, Thompson J, Grego S, Stoner B. Surface modification for enhanced silanation of zirconia ceramics. Dental Materials. 2009;25(9):1116-21.
47. Yun J-y, Ha S-r, Lee J-b, Kim S-h. Effect of sandblasting and various metal primers on the shear bond strength of resin cement to Y-TZP ceramic. Dental Materials. 2010;26(7):650-8.
48. Geramipanah F, Majidpour M, Sadighpour L, Fard M. Effect of artificial saliva and pH on shear bond strength of resin cements to zirconia-based ceramic. The European journal of prosthodontics and restorative dentistry. 2013;21(1):5.
49. Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. The Journal of prosthetic dentistry. 2004;91(4):356-62.
50. Kitayama S, Nikaido T, Takahashi R, Zhu L, Ikeda M, Foxton RM, et al. Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dental materials. 2010;26(5):426-32.
51. Ikemura K, Tay FR, Nishiyama N, Pashley DH, Endo T. Multi-purpose bonding performance of newly synthesized phosphonic acid monomers. Dental Materials Journal. 2007;26(1):105-15.
52. Matinlinna JP, Lung CYK, Tsoi JKH. Silane adhesion mechanism in dental applications and surface treatments: A review. Dental Materials. 2018;34(1):13-28.
53. Bona AD, Borba M, Benetti P, Cecchetti D. Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Brazilian oral research. 2007;21(1):10-5.
54. Pilo R, Dimitriadi M, Palaghia A, Eliades G. Effect of tribochemical treatments and silane reactivity on resin bonding to zirconia. Dental Materials. 2018;34(2):306-16.
55. Matinlinna J, Vallittu P. Bonding of resin composites to etchable ceramic surfaces–an insight review of the chemical aspects on surface conditioning. Journal of Oral Rehabilitation. 2007;34(8):622-30.
56. Alves M, Campos F, Bergoli C, Bottino M, Özcan M, Souza R. Effect of adhesive cementation strategies on the bonding of Y-TZP to human dentin. Operative Dentistry. 2016;41(3):276-83.
57. Ntala P, Chen X, Niggli J, Cattell M. Development and testing of multi-phase glazes for adhesive bonding to zirconia substrates. Journal of Dentistry. 2010;38(10):773-81.
58. Kukiattrakoon B, Thammasitboon K. The effect of different etching times of acidulated phosphate fluoride gel on the shear bond strength of high-leucite ceramics bonded to composite resin. The Journal of prosthetic dentistry. 2007;98(1):17-23.
59. Bottino M, Bergoli C, Lima E, Marocho S, Souza R, Valandro L. Bonding of Y-TZP to dentin: effects of Y-TZP surface conditioning, resin cement type, and aging. Operative Dentistry. 2014;39(3):291-300.
60. Queiroz JRCd, Duarte DA, Fissmer SF, Massi M, Bottino MA. Deposition of SiOx thin films on Y-TZP by reactive magnetron sputtering: influence of plasma parameters on the adhesion properties between Y-TZP and resin cement for application in dental prosthesis. Materials Research. 2011;14(2):212-6.
61. Druck CC, Pozzobon JL, Callegari GL, Dorneles LS, Valandro LF. Adhesion to Y‐TZP ceramic: Study of silica nanofilm coating on the surface of Y‐TZP. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2015;103(1):143-50.
62. Wandscher V, Prochnow C, Rippe M, Dorneles L, Callegari G, Baldissara P, et al. Retentive strength of y-tzp crowns: comparison of different silica coating methods on the intaglio surfaces. Operative Dentistry. 2017;42(5):E121-E33.
63. Ishii R, Tsujimoto A, Takamizawa T, Tsubota K, Suzuki T, Shimamura Y, et al. Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding. Dental Materials Journal. 2015:2014-066.
64. Yang B, Lange-Jansen H, Scharnberg M, Wolfart S, Ludwig K, Adelung R, et al. Influence of saliva contamination on zirconia ceramic bonding. Dental Materials. 2008;24(4):508-13.
65. Samran A, Al-Ammari A, El Bahra S, Halboub E, Wille S, Kern M. Bond strength durability of self-adhesive resin cements to zirconia ceramic: An in vitro study. The Journal of prosthetic dentistry. 2019;121(3):477-84.
66. Yoshida K. Influence of cleaning methods on resin bonding to saliva‐contaminated zirconia. Journal of Esthetic and Restorative Dentistry. 2018;30(3):259-64.

Details

Primary Language

Turkish

Subjects

Dentistry

Journal Section

Review

Authors

Özge Genç ^*
0000-0002-7048-1415
Türkiye

Necla Demir
0000-0003-0927-6962
Türkiye

Publication Date

April 27, 2022

Submission Date

October 23, 2020

Acceptance Date

December 25, 2020

Published in Issue

Year 2022 Volume: 9 Number: 1

DOI

https://doi.org/10.15311/selcukdentj.815274

IZ

https://izlik.org/JA64YF72FJ

Cite

RIS / Bibtex

APA

Genç, Ö., & Demir, N. (2022). SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ. Selcuk Dental Journal, 9(1), 299-307. https://doi.org/10.15311/selcukdentj.815274

AMA

1.Genç Ö, Demir N. SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ. Selcuk Dent J. 2022;9(1):299-307. doi:10.15311/selcukdentj.815274

Chicago

Genç, Özge, and Necla Demir. 2022. “SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ”. Selcuk Dental Journal 9 (1): 299-307. https://doi.org/10.15311/selcukdentj.815274.

EndNote

Genç Ö, Demir N (April 1, 2022) SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ. Selcuk Dental Journal 9 1 299–307.

IEEE

[1]Ö. Genç and N. Demir, “SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ”, Selcuk Dent J, vol. 9, no. 1, pp. 299–307, Apr. 2022, doi: 10.15311/selcukdentj.815274.

ISNAD

Genç, Özge - Demir, Necla. “SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ”. Selcuk Dental Journal 9/1 (April 1, 2022): 299-307. https://doi.org/10.15311/selcukdentj.815274.

JAMA

1.Genç Ö, Demir N. SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ. Selcuk Dent J. 2022;9:299–307.

MLA

Genç, Özge, and Necla Demir. “SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ”. Selcuk Dental Journal, vol. 9, no. 1, Apr. 2022, pp. 299-07, doi:10.15311/selcukdentj.815274.

Vancouver

1.Özge Genç, Necla Demir. SİMANTASYON ÖNCESİ ZİRKONYUM SERAMİKLERE UYGULANAN YÜZEY İŞLEMLERİ. Selcuk Dent J. 2022 Apr. 1;9(1):299-307. doi:10.15311/selcukdentj.815274