A single-phase solid-state fault current limiter: Simulation and experimental study

Yıl 2024, Cilt: 42 Sayı: 1, 164 - 176, 27.02.2024

Barış Küçükaydın , Evren İşen , Oktay Arikan

Öz

Various methods are used to reduce fault currents in fault situations occurring in power sys-tems. In this study, a developed single-phase power electronics-based solid-state fault current limiter is presented. The proposed single-phase solid-state fault current limiter is designed as preliminary prototype of the three-phase low voltage solid-state fault current limiter. The maximum current and voltage capability of the fault current limiter is 16 A and 480 V. This limiter works according to the principle of series and parallel resonance. In normal operation, the current passes through the inductance and capacitor, which are in series resonance. Thus, extra voltage drops and power loss in the system are prevented. In the event of a fault, the lim-iter switches to parallel resonance, and its impedance increases. Therefore, the fault current is decreased. The developed circuit and control algorithm reduces the first peak of fault current with a rather high percentage by comparison with the fault current without fault current lim-iter. In addition, the amplitude of current oscillation is decreased, and the current is recovered in a short time because the control algorithm determines the fault start and end time fast. The effect of the limiter is demonstrated with the simulation results in Matlab/Simulink. The simu-lation results are verified with the application study carried out in the laboratory environment. The fault current reaches up to 58.5 A in case of fault current limiter is not used, whereas the developed fault current limiter suppresses the current to around 9 A. The value of maximum fault current decreases to 15% according to the non-fault current limiter used situation. In the study, detailed application notes of the limiter circuit are shared.

Anahtar Kelimeler

Single-Phase Fault Current Limiter, Parallel Resonance; Series Resonance, Phase To Ground Fault

Kaynakça

• REFERENCES
• [1] Alawan MA. Design of intelligent distance relay for cascaded transmission line fault detection based on fuzzy logic system. Period Eng Nat Sci 2020;8:1075–1082.
• [2] Abdalı A, Abdalı K, Bagheri A. An elitist gravitational search algorithm based approach for optimal placement of fault current limiters in power systems. Sigma J Eng Nat Sci 2019;3:691–704.
• [3] Hussein AA, Ali MH. Comparison among series compensators for fault ride through capability enhancement of wind generator systems. Int J Renew Energy Res 2014;4:767–776.
• [4] Shobug MA, Sheikh MRI. Fault Management in DFIG Based Wind Turbine Using Sophisticated Advanced Solid State Fault Current Limiter. IEEE Region 10 Symposium (TENSYMP), Dhaka. 2020:1660–1663. [CrossRef]
• [5] Power AJ. An overview of transmission fault current limiters. IEE Colloquium on Fault Current Limiters – A Look at Tomorrow. London: IET Digital Library; 1995. [CrossRef]
• [6] Kraemer HP, Bauer A, Frank M, Hasselt PV, Kummeth P, Wohlfart M, et al. Assist- a superconducting fault current limiter in a public electric power grid. IEEE Trans Power Deliv 2022;37:612–618. [CrossRef]
• [7] Yadav S, Choudhary GK, Mandal RK. Review on fault current limiters. Int J Eng Res Technol 2014;3:1595–1603.
• [8] Emami Y, Koochaki A, Radmehr M. SSR Alleviation in SCIG-based wind power plants. J Electr Eng Technol 2021;16:907–916. [CrossRef]
• [9] Islam R, Hasan J, Shipon RR, Sadi MAH, Abuhussein A, Roy TK. Neuro fuzzy logic controlled parallel resonance type fault current limiter to improve the fault ride through capability of DFIG based wind farm. IEEE Access 2020;8:115314–115334. [CrossRef]
• [10] Gang C, Daozhuo J, Zhaolin W, Zhengyu L. Simulation study of bridge type solid state fault current limiter. IEEE Power Eng Soc General Meet 2014;4:2521–2526.
• [11] Jiang F, Cheng S, Tu C, Guo Q, Zhu R, Li X, Liserre M. Design consideration of a dual-functional bridge-type fault current limiter. IEEE J Emerg Select Topics Power Electron 2020;8:3825–3834. [CrossRef]
• [12] Heidary A, Radmanesh H, Bakhshi A, Rouzbehi K, Pouresmaeil E. A compound current limiter and circuit breaker. Electronics 2019;8:1–12. [CrossRef]
• [13] Komatsu W, Giaretta AR, Miranda R, Jardini JA, Casolari RP, Vasquez-Arnez RL, et al. Fault current limitation using thyristor based devices. International Power Electronics Conference. 2014:1276– 1282. [CrossRef] [14] Radmanesh H, Heidary A. Bridge Type Series Resonance Transient Current Limiter for Medium-Voltage Smart Grids Application. 10th Smart Grid Conference (SGC). 2020:01–05. [CrossRef]
• [15] Rezaee M, Harley RG, Heydari H. Saturated-core resonant fault current limiter. Clemson University Power Systems Conference. 2015:1–5. [CrossRef]
• [16] Rezaee M, Harley RG. Performance analysis of parallel-type resonant fault current limiters. Clemson University Power Systems Conference (PSC). 2016:1–5. [CrossRef]
• [17] Zhang X, Zhang Y. A viable approach for limiting fault currents in electric networks. IEEJ Trans Electric Electron Eng 2019;14:556–560. [CrossRef]
• [18] Arikan O, Kucukaydin B. A new approach to limit fault current with series–parallel resonance strategy. Electric Eng 2020;102:1287–1296. [CrossRef]
• [19] Hagh MT, Naderi SB, Jafari M. New Resonance Type Fault Current Limiter. IEEE Int Conf Power Energy 2010:507–511. [CrossRef]
• [20] Isen E, Yanik G, Bakan AF. Implementation of Three-Phase Grid-Connected Inverter Controlled with dSpace DS1103. 2nd International Conference on Renewable Energy Research and Applications; Madrid: 2013. [CrossRef]
• [21] TOSHIBA. TLP350 datasheet. 2005. Available at: https://datasheet.octopart.com/TLP350(TP1,F)-Toshiba-datasheet-148055.pdf Accessed on Feb 07, 2024.
• [22] LEM. LA 25-NP datasheet. 2011. Available at: https://www.lem.com/sites/default/files/products_datasheets/la%2025-np.pdf Accessed on Feb 07, 2024.
• [24] LEM. LV 25-P datasheet. 2021. Available at: https://www.lem.com/sites/default/files/products_datasheets/lv_25-p.pdf Accessed on Feb 07, 2024.
• [26] STMicroelectronics. L78 Positive voltage regulator ICs datasheet. 2014. Available at: https://www.farnell.com/datasheets/1805459.pdf Accessed on Feb 07, 2024.
• [28] STMicroelectronics. L79xxC Negative voltage regulators datasheet. 2012. Available at: https://cdn.ozdisan.com/ETicaret_Dosya/596904_5181975.PDF Accessed on Feb 07, 2024.
• [30] Radmanesh H, Fathi SH, Gharehpetian GB, Heidary A. Bridge-type solid-state fault current limiter based on AC/DC reactor. IEEE Trans Power Deliv 2016;31:200–209. [CrossRef]
• [31] Ghanbari T, Farjah E, Zandnia A. Development of a high‐performance bridge‐type fault current limiter. IET Gener Transm Distrib 2014;8:486–494. [CrossRef]
• [32] Ghanbari T, Farjah E. Development of an Efficient Solid-State Fault Current Limiter for Microgrid. IEEE Trans Power Deliv 2012;27:1829–1834. [CrossRef]