BİRİNCİ FIRIN SICAKLIĞININ YALANCI BÜKÜMLE TEKSTÜRE EDİLEN POLİETİLEN TERAFTALAT İPLİKLERİNİN ÖZELLİKLERİNE ETKİSİ

Year 2009, Volume: 19 Issue: 4, 286 - 290, 01.12.2009

Kenan Yıldırım Şule Altun Yusuf Ulcay

Abstract

Birinci fırın sıcaklığının polietilen teraftalat filamentlerin özelliklerine etkisi kopma mukavemeti, kopma uzaması, kaynama çekmesi, kıvrım stabilitesi, kıvrım büzülmesi ve kristalinite ölçümleriyle incelenmiştir. Kristalinitenin 200oC civarında maksimuma ulaştığı ve ardından düşmeğe başladığı bulunmuştur. Kıvrım stabilitesinde de benzer bir davranış gözlenmiştir. Isıtıcı sıcaklığı arttığında kopma mukavemeti ve kıvrım büzülmesi artmış, kaynama çekmesi ise düşmüştür

Keywords

Yalancı bükümlü teksture, Fırın sıcaklığı, Yapı-özellik, Teksture

THE EFFECT OF FIRST HEATER TEMPERATURE ON THE PROPERTIES OF FALSE-TWIST TEXTURED POLY (ETHYLENE TERAPTHALATE) YARN

Abstract

The effect of first heater temperature on the properties of poly (ethylene terapthalate) filaments was characterized through measurements of tenacity, breaking elongation, boiling shrinkage, crimp stability, crimp contraction and crystallinity. It was found that crystallinity reached a maximum at a temperature around 200 C, and then started to decrease. A similar behavior was observed in crimp stability. Tenacity and crimp contraction increased and boiling water shrinkage decreased, when the heater temperature increased

Keywords

False-twist texturing, Heater temperature, Structure-properties, Texturing

References

• 1. Demir, A. and. Behery, H.M., 1997, Synthetic Filament Yarn Texturing Technology, Prentice Hall, New Jersey, 56.
• 2. Hearl J.W.S,. Hollick, L. and Wilson, D.K, 2001, Yarn Texturing Technology, Woodhead Pub., Cambridge, 15.
• 3. Egambaram, T., Afify, E.M. and El-Shiekh, A., 1974, Heat Transfer in False-Twist Texturing, Textile Res. J., Vol. 44, 10, pp. 803-812.
• 4. Yildirim, K., Altun, S and Ulcay, Y., 2009, Relationship between Yarn Properties and Process Parameters in False-Twist Textured Yarn, Journal of Engineered Fibers and Fabrics, Vol. 4, 2 , pp.26-32.
• 5. Gupta, B.V., Majumdar, A. and Seth, K.K., 1974, Structural Changes in Nylon 6 Yarn on Heat-Setting and Friction-Twsited Texturing, Textile Res. J, Vol. 44, Issue 7, pp. 539-543.
• 6. Gupta, V.B.and Kumar, M., 1975, Changes in Structure of Polyethylene Terepthalate Yarn on Texturing, Textile Res. J, Vol. 45, Issue 5, pp. 382-388.
• 7. Gupta, V.B and Amirtharaj, J.,1976, The Effect of Tension and Twist on the Structure and Dyeability of Textured Polyethylene Terapthalate Yarn, Textile Res. J, Vol. 46, Issue 11, pp. 785-790
• 8. Hardegree, G.L. and Buchanan, D.R, 1976, Physical Properties of Textured Polyester Yarns: The Influence of Texturing Temperatures, Textile Res. J, Vol. 46, Issue11, pp. 828-833.
• 9. Ghosh, S. and.Wolhar, J., 1981, The Influence of Some Machine-Setting Variables on The Properties of Yarns in the Friction-TwistDraw-Texturing Process, Textile Res. J, Vol. 51, Issue 6, pp. 373-383.
• 10. Pal, S.K, Gandhi, R.S. and Kothari, V.K., 1996, Draw Texturing of Microfiber Polyester Yarn, Textile Res. J, Vol. 66, Issue 12, pp. 770- 776.
• 11. Heuvel, H.M. and Huisman, H., 1985, ” Effect of Winding Speed and Other Spinning Conditions on the Physical Structure of As-Spun Polyethlene Terepthalate and Nylon 6 Yarns”, High Speed Fiber Spinning, Eds. A. Ziabicki and H. Kawai, John Wiley&Sons, New York, pp. 295-331.
• 12. Hotter, J.F, Cuculo, J.A and Tucker, P.A., 1998, Effect of Initial Take-Up Speed on Properties and Structure of As-Spun and Drawn/Heat-Set Poly(Ethylene Terephthalate) Filaments, J Appl Polym Sci., Vol. 69, pp. 2115-2131.
• 13. Gupta, V.B., 2002, Heat Setting, J Appl Polym Sci., Vol. 83, pp. 586-609.
• 14. Perez, G., 1985, Some Effects of the Rheological Properties of Polyethylene Terepthalate on Spinning Line Profile and Structure Developed in High Speed Spinning, High Speed Fiber Spinning, Eds. Ziabicki, A. and Kawai, H., John Wiley&Sons, New York, pp. 333- 362.
• 15. Naik, N.K and Madhavan, V., 2000, Twisted Impregnated Yarns: Elastic Properties, The Journal of Strain Analysis for Engineering Design, Vol. 35, pp. 83-91.
• 16. Denton, M.J. and Morris, W.J., 1971, Heat Setting and Yarn Texturing, The Setting of Yarn and Fabrics, Eds. Hearle, J.W.S and Miles, L.W.C, Merrow Publishing Co Ltd., Watford Herts.