Usage of UV-Curable Soybean Oil Based Coating Formulations for Pretreated Cotton Fabrics

Year 2022, Volume: 32 Issue: 3, 232 - 242, 30.09.2022

Zehra Yıldız

https://doi.org/10.32710/tekstilvekonfeksiyon.940434

Cited By: 1

Abstract

This study aims to design an alternative way for the laminated fabric manufacturing with a cleaner production method, by using a bio-based coating formulation and time/cost saving, environmentally friendly UV-curing technology, compared to the conventional petroleum based, heat and solvent requiring laminating process. For this purpose, acrylated epoxidized soybean oil oligomer was synthesized and included in coating formulations for the application on cotton fabrics via UV-curing. The obtained oligomer was characterized by FTIR and 1H NMR spectroscopies. In order to enhance the bonding between the fabric and coating layer, fabrics were pretreated by sodium hydroxide, pectinase enzyme, and a commercial washing agent prior to the coating process. The effects of pretreatment methods on the wettability, tensile and peel strength, and abrasion resistance of the fabrics were all examined before/after coating process. Enzyme pretreatment revealed promising results by increasing the surface roughness, fibrillation, and hydrophilicity of the cotton fabrics.

Keywords

Soybean Oil, Cotton Fabric, UV-Curing, Pectinase Enzyme, Peel Test

References

• [1] E. Baştürk, T. İnan, and A. Güngör, "Flame retardant UV-curable acrylated epoxidized soybean oil based organic–inorganic hybrid coating," Progress in Organic Coatings, vol. 76, no. 6, pp. 985-992, 2013.
• [2] G. Acik, "Soybean oil modified bio-based poly (vinyl alcohol) s via ring-opening polymerization," Journal of Polymers and the Environment, vol. 27, no. 11, pp. 2618-2623, 2019.
• [3] J. Guit et al., "Photopolymer resins with biobased methacrylates based on soybean oil for stereolithography," ACS Applied Polymer Materials, vol. 2, no. 2, pp. 949-957, 2020.
• [4] X. Xu et al., "Preparation and characterization of cellulose grafted with epoxidized soybean oil aerogels for oil-absorbing materials," Journal of agricultural and food chemistry, vol. 67, no. 2, pp. 637-643, 2019.
• [5] J. Moon, Y.-G. Shul, H. Han, S. Hong, Y. Choi, and H. Kim, "A study on UV-curable adhesives for optical pick-up: I. Photo-initiator effects," International journal of adhesion and adhesives, vol. 25, no. 4, pp. 301-312, 2005.
• [6] J.-S. Hwang, M.-H. Kim, D.-S. Seo, J.-W. Won, and D.-K. Moon, "Effects of soft segment mixtures with different molecular weight on the properties and reliability of UV curable adhesives for electrodes protection of plasma display panel (PDP)," Microelectronics Reliability, vol. 49, no. 5, pp. 517-522, 2009.
• [7] A. Giessmann, Coating substrates and textiles: a practical guide to coating and laminating technologies. Springer Science & Business Media, 2012.
• [8] W. Schnabel, Polymers and light: fundamentals and technical applications. John Wiley & Sons, 2007.
• [9] M. Bajpai, V. Shukla, and A. Kumar, "Film performance and UV curing of epoxy acrylate resins," Progress in Organic Coatings, vol. 44, no. 4, pp. 271-278, 2002.
• [10] S. Sung and D. S. Kim, "UV‐curing and mechanical properties of polyester–acrylate nanocomposites films with silane‐modified antimony doped tin oxide nanoparticles," Journal of applied polymer science, vol. 129, no. 3, pp. 1340-1344, 2013.
• [11] F. Habib and M. Bajpai, "UV Curable heat resistance Epoxy Acrylate Coatings," Journal of Chemistry & Chemical Technology, vol. 4, no. 3, pp. 205-216, 2010.
• [12] O. Eksik, M. A. Tasdelen, A. T. Erciyes, and Y. Yagci, "In situ synthesis of oil-based polymer/silver nanocomposites by photoinduced electron transfer and free radical polymerization processes," Composite Interfaces, vol. 17, no. 4, pp. 357-369, 2010.
• [13] J. Xie, N. Zhang, M. Guers, and V. K. Varadan, "Ultraviolet-curable polymers with chemically bonded carbon nanotubes for microelectromechanical system applications," Smart materials and structures, vol. 11, no. 4, p. 575, 2002.
• [14] G. Bayramoğlu, M. V. Kahraman, N. Kayaman-Apohan, and A. Güngör, "Synthesis and characterization of UV-curable dual hybrid oligomers based on epoxy acrylate containing pendant alkoxysilane groups," Progress in Organic Coatings, vol. 57, no. 1, pp. 50-55, 2006.
• [15] Q. Wu et al., "High-performance soybean-oil-based epoxy acrylate resins:“green” synthesis and application in uv-curable coatings," ACS Sustainable Chemistry & Engineering, vol. 6, no. 7, pp. 8340-8349, 2018.
• [16] F. Habib and M. Bajpai, "Synthesis and characterization of acrylated epoxidized soybean oil for UV cured coatings," Chemistry & Chemical Technology, vol. 5, no. 3, pp. 317-326, 2011.
• [17] Z. Chen, J. F. Wu, S. Fernando, and K. Jagodzinski, "Soy-based, high biorenewable content UV curable coatings," Progress in Organic Coatings, vol. 71, no. 1, pp. 98-109, 2011.
• [18] M. Bajpai, V. Shukla, D. Singh, M. Singh, and R. Shukla, "A study of the film properties of pigmented UV‐curable epoxidised soybean oil," Pigment & resin technology, vol. 33, no. 3, pp. 160-164, 2004, doi: DOI 10.1108/03699420410537278.
• [19] E. Baştürk and M. V. Kahraman, "Photocrosslinked biobased phase change material for thermal energy storage," Journal of Applied Polymer Science, vol. 133, no. 32, 2016.
• [20] T. H. Lee, Y. I. Park, S.-H. Lee, J. Shin, S. M. Noh, and J. C. Kim, "A crack repair patch based on acrylated epoxidized soybean oil," Applied Surface Science, vol. 476, pp. 276-282, 2019.
• [21] T. A. Salim et al., "Investigation on the Influence of Non-Degradable Polyvinyl Tarpaulin in Concrete Mixture," Sustainable Construction and Building Technology, pp. 71-82, 2018.
• [22] N. Aliverdipour, N. Ezazshahabi, and F. Mousazadegan, "Characterization of the effect of fabric’s tensile behavior and sharp object properties on the resistance against penetration," Forensic science international, vol. 306, p. 110097, 2020.
• [23] H. Ozgen, "Enzymatic Hydrophilization of Cotton Knitted Fabrics with Various Methods " Master Thesis, Department of Textile Engineering, Bartın University, Turkey, 2018.
• [24] M. D. Stanescu, M. Dochia, D. Radu, and C. Sirghie, "Green solution for cotton scouring," Fibres & Textiles in Eastern Europe, vol. 18, no. 3, p. 80, 2010.
• [25] R. A. Silverstein, Y. Chen, R. R. Sharma-Shivappa, M. D. Boyette, and J. Osborne, "A comparison of chemical pretreatment methods for improving saccharification of cotton stalks," Bioresource technology, vol. 98, no. 16, pp. 3000-3011, 2007.
• [26] H. B. Öztürk and T. Bechtold, "Effect of NaOH treatment on the interfibrillar swelling and dyeing properties of lyocell (TENCEL) fibres," Fibres & Textiles in Eastern Europe, vol. 15, no. 5-6, pp. 64-65, 2007.
• [27] H. B. Öztürk et al., "Changes in the intra-and inter-fibrillar structure of lyocell (TENCEL®) fibers caused by NaOH treatment," Cellulose, vol. 16, no. 1, p. 37, 2009.
• [28] Y.-C. Su, L.-P. Cheng, K.-C. Cheng, and T.-M. Don, "Synthesis and characterization of UV-and thermo-curable difunctional epoxyacrylates," Materials Chemistry and Physics, vol. 132, no. 2-3, pp. 540-549, 2012.
• [29] Z. Yildiz, H. A. Onen, O. G. Dehmen, and A. Gungor, "Usage of Cellulose Acetate Butyrate Based Oligomeric Structures on Cotton Fabric Coatings," JOTCSA, vol. 8, no. 1, pp. 305-312, 2021.
• [30] L. Li, T. Fan, R. Hu, Y. Liu, and M. Lu, "Surface micro-dissolution process for embedding carbon nanotubes on cotton fabric as a conductive textile," Cellulose, vol. 24, no. 2, pp. 1121-1128, 2017.
• [31] M. E. Yazdanshenas and M. Shateri-Khalilabad, "In situ synthesis of silver nanoparticles on alkali-treated cotton fabrics," Journal of industrial textiles, vol. 42, no. 4, pp. 459-474, 2013.
• [32] ASTM D974-14e2, Standard Test Method for Acid and Base Number by Color-Indicator Titration, ASTM International, West Conshohocken, PA, 2014, www.astm.org.
• [33] ASTM D1652-11(2019), Standard Test Method for Epoxy Content of Epoxy Resins, ASTM International, West Conshohocken, PA, 2019, www.astm.org.
• [34] G. S. Bhusari, S. S. Umare, and A. S. Chandure, "Effects of NCO: OH ratio and HEMA on the physicochemical properties of photocurable poly (ester-urethane) methacrylates," Journal of Coatings Technology and Research, vol. 12, no. 3, pp. 571-585, 2015.
• [35] ASTM D543-20, Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents, ASTM International, West Conshohocken, PA, 2020, www.astm.org.
• [36] AATCC Test Method 79-2018: Absorbency of Bleached Textiles," ed, 2018.
• [37] AATCC Test Method 22-2005: Water Repellency: Spray Test," ed, 2005.
• [38] ISO 13934-1:2013 Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method.
• [39] ASTM D1876-08(2015)e1, Standard Test Method for Peel Resistance of Adhesives (T-Peel Test), ASTM International, West Conshohocken, PA, 2015, www.astm.org.
• [40] ISO 5470-2:2003 Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader.
• [41] ISO 12947-2:2016 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown.
• [42] S. R. Sandler, W. Karo, J. Bonesteel, and E. M. Pearce, Polymer synthesis and characterization: A laboratory manual. Elsevier, 1998.
• [43] C. Li, H. Xiao, X. Wang, and T. Zhao, "Development of green waterborne UV-curable vegetable oil-based urethane acrylate pigment prints adhesive: Preparation and application," Journal of Cleaner Production, vol. 180, pp. 272-279, 2018.
• [44] N. Uysal, G. Acik, and M. A. Tasdelen, "Soybean oil based thermoset networks via photoinduced CuAAC click chemistry," Polymer International, vol. 66, no. 7, pp. 999-1004, 2017.
• [45] A. Rianjanu, S. Hidayat, T. Julian, E. Suyono, A. Kusumaatmaja, and K. Triyana, "Swelling behavior in solvent vapor sensing based on Quartz Crystal Microbalance (QCM) Coated Polyacrylonitrile (PAN) nanofiber," in IOP Conf. Ser. Mater. Sci. Eng, 2018, vol. 367, p. 012020.
• [46] M. N. Al-Shamary, H. A. Al-Lohedan, M. Rafiquee, F. El-Ablack, and Z. A. Issa, "Micellar effect upon the rate of alkaline hydrolysis of carboxylic and carbonate esters," Journal of Saudi Chemical Society, vol. 21, pp. S193-S201, 2017.
• [47] Z. Yildiz, H. A. Onen, A. Gungor, Y. Wang, and K. Jacob, "Effects of NCO/OH ratio and reactive diluent type on the adhesion strength of polyurethane methacrylates for cord/rubber composites," Polymer-Plastics Technology and Engineering, vol. 57, no. 10, pp. 935-944, 2018.
• [48] M. M. Á. D. Maciel, K. C. C. de Carvalho Benini, H. J. C. Voorwald, and M. O. H. Cioffi, "Obtainment and characterization of nanocellulose from an unwoven industrial textile cotton waste: Effect of acid hydrolysis conditions," International journal of biological macromolecules, vol. 126, pp. 496-506, 2019.
• [49] Y. Cheng et al., "A novel strategy for fabricating robust superhydrophobic fabrics by environmentally-friendly enzyme etching," Chemical Engineering Journal, vol. 355, pp. 290-298, 2019.
• [50] A. Ivanovska, D. Cerovic, S. Maletic, I. J. Castvan, K. Asanovic, and M. Kostic, "Influence of the alkali treatment on the sorption and dielectric properties of woven jute fabric," Cellulose, vol. 26, no. 8, pp. 5133-5146, 2019.
• [51] M. Akgun, B. Becerir, and H. R. Alpay, "Investigation of the relation between surface roughness and friction properties of polyester fabrics after abrasion," The Journal of The Textile Institute, vol. 109, no. 3, pp. 322-337, 2018.
• [52] C. Tan, Y. Chan, H. Chan, N. Leung, and C. So, "Investigation on bondability and reliability of UV-curable adhesive joints for stable mechanical properties in photonic device packaging," Microelectronics Reliability, vol. 44, no. 5, pp. 823-831, 2004.
• [53] Y.-J. Park, D.-H. Lim, H.-J. Kim, D.-S. Park, and I.-K. Sung, "UV-and thermal-curing behaviors of dual-curable adhesives based on epoxy acrylate oligomers," International Journal of Adhesion and Adhesives, vol. 29, no. 7, pp. 710-717, 2009.