EXPERIMENTAL PERFORMANCE OF R134a AND R152a USING MICROCHANNEL CONDENSER

Yıl 2015, Cilt: 1 Sayı: 7 - Cilt: 1 Sayı: 7, 575 - 582, 01.07.2015

V. W. Bhatkar

https://doi.org/10.18186/jte.55930

Cited By: 4

Öz

An experimental performance study on vapour compression refrigeration system with R134a and drop in substitute R152a with aluminium microchannel condenser was carried out for condensation temperature of 48°C while evaporation temperature varied from -10 to 15°C. Refrigerant charge of R152a was reduced by 40% over R134a with the microchannel condenser. Performance parameters like work input to the compressor, coefficient of performance, refrigerating capacity, condenser capacity and the product of the overall heat transfer coefficient & surface area of the condenser are plotted and results are discussed.

Anahtar Kelimeler

R134a, R152a, microchannel condenser, coefficient of performance

Kaynakça

• Dalkilic A. S., Wongwises S., 2010, “A performance
• comparison of vapour compression refrigeration system using various alternative refrigerants,” International Communication in Heat and Mass Transfer 37, 1340-1349.
• Elsayed A. O., Hariri A. S., 2011, “Effect of condenser air
• flow on the performance of split air conditioner,” World Renewable Energy Congress, Sweden, 2134-2141.
• Yanhui H., Yan L., Ming L. J., 2011, 2nd International Conference (ICAEE2011), Elsevier, Energy procedia, 14, 148-153. in Energy Engineering Seventh International Conference on analysis of multiple parallel pass condensers,” International Journal of Refrigeration 32, 1153-1161.
• Koyama S., Kuwahara K., Nakashita K.,Yamamoto K.,
• 2003, “An experimental study on condensation of refrigerant R134a in a multi-port extruded tube,” International Journal of Refrigeration 24, 425-432.
• Fernando P., Palm B., Ameel T., Lundqvist P., Granryd E.,
• 2008, “A minichannel aluminium tube heat exchanger-Part- III, condenser performance with propane,” International Journal of Refrigeration 31,696-708.
• Ebrahim A., Shooshtari A. H., Dessiatoun S., Ohadi M. M.,
• 2013, “Performance characterization of R134a and R245fa in a high aspect ratio microchannel condenser,” International Journal of Refrigeration 36, 588-600.
• Kandlikar S., Garimella S., Li D., Colin S., King M. R.,
• 2006, “Heat transfer and fluid flow in minichannels and microchannels, First edition, Elsevier Publication, U.K.
• Matkovic M., Cavallini A., Col D. D., Rossetto L., 2009, “Experimental study on condensation heat transfer inside single circular minichannel,” International Journal of Heat and Mass Transfer 52, 2311-2323.
• Wei L., Wu Z., 2010, “A general criterion for evaporative heat transfer in micro/mini-channels,” International Journal of Heat and Mass Transfer 53, 1967-1976.
• Jwo C. S., Ting C. C., Wang W. R., 2009, “Efficiency analysis of home refrigerators by replacing hydrocarbon refrigerants,” Measurement 42, 697-701.
• Bhatkar V. W., Kriplani V. M.,Awari G. K., 2013, “Alternative refrigeration cycle for sustainable environment: a review of recent research,” International Journal of Environmental Science and Technology, 10, 871-880. compression
• Bhatkar V. W., Kriplani V. M.,Awari G. K., 2013, “Numerical simulations of a aluminium microchannel condenser for household air conditioner,” International Review of Mechanical Engineering, 7, 183-190.
• Yun R., Heo J. H., Kim Y., 2006, “Evaporative heat transfer and pressure drop of R410A in microchannels,” International Journal of Refrigeration 29, 92-100.
• Chang Y.S., Kim M.S., Ro S.T., 2000, “Performance and heat transfer characteristics of hydrocarbon refrigerants in a heat pump system,” International Journal of Refrigeration 23, 232-242.
• Ohadi M., Choo K., Dessiatoun S., Cetegen E., 2013, “Next generation microchannel heat exchangers,” springer briefs in thermal engineering and applied science, vol. 7.
• Park H.S., Punch J., 2008, “Friction factor and heat transfer in multiple microchannels with uniform flow distribution,” International Journal of Heat and Mass Transfer 51, 4535-4543.
• Kim S.M., Mudawar I., 2013, “Universal approach to predicting heat transfer coefficients for condensing mini/micro-channel flow” International Journal of Heat and Mass Transfer 56,238-250.
• Palm B., 2007, “Refrigeration systems with minimum charge of refrigerant,” Applied Thermal Engineering 27, 1693-1701.
• Palm B., 2008, “Hydrocarbon as refrigerants in small heat pump and refrigeration systems- a review,” International Journal of Refrigeration 31, 552-563.
• Poggi F., Macchi-Tejedaa H., Leducqa D., Bontempsb A., 2008, “Refrigerant charge in refrigerating systems and strategies of charge reduction,” International Journal of Refrigeration 31, 353-370.
• Agarwal A., Bandhauer T. M., Garimella S., 2010, “Measurement and modeling of condensation heat transfer in non-circular microchannels,’ International Journal of Refrigeration 33, 1169-1179.
• Zhao Z.Y., Chen J., 2010, “Performance enhancement study of mobile air conditioning system using microchannel heat exchangers,” International Journal of Refrigeration 33, 301-312.
• Lu X., Nnanna A. G., 2008, “Experimental study of fluid flow in microchannel” ASME International Mechanical Engineering Massachusetts, USA. and Congress Exposition, Bostan,
• ASHRAE Guidelines 2, 1986, “Engineering Analysis of Experimental Data,” pp. 1-20.
• Bolaji B. O., Akintunde M. A., Falade T. O., 2011, “Comparative analysis of performance of three ozone friendly refrigerants in a vapour compression refrigerator,” Journal of Sustainable Energy and Environment, 2, 61-64.
• Bhaskaran A. Koshy Mathews P., 2012, “A performance comparison of vapour compression refrigeration system using eco-friendly refrigerants of low global warming potential,” International Jou. Of Scientific and Research Publications, 2 (9) 1-8.