A state-of-the-art review on thermo fluid performance of brazed plate heat exchanger for HVAC application

Yıl 2024, Cilt: 10 Sayı: 5, 1390 - 1410, 10.09.2024

Madhu Kalyan Reddy Pulagam Sachindra Rout , Sunil Kumar Sarangi

Öz

Plate heat exchangers have served various industrial applications for decades, with brazed plate heat exchangers (BPHE) emerging as preferred choices due to their favorable operating conditions. While extensive research has been conducted on flow patterns in gasketed plate heat exchangers, similar studies for BPHE have been lacking, given their analogous geometry. However, recent years have witnessed a surge in research focusing on single and multi-phase flow dynamics. Advancements in computational fluid dynamics (CFD) have furthered our understanding by providing insights into flow and heat transfer patterns, while also reducing the need for costly experimental tests of different geometries. This has facilitated the adoption of parametrization, bolstered by the feasibility and accuracy of numerical models. Nevertheless, substantial research remains to be undertaken to develop comprehensive models capable of integrating multiple geometric and flow parameters. This article examines existing research on BPHE and outlines potential areas for future exploration to address current research gaps.

Anahtar Kelimeler

CFD, Fluid Flow, Friction Factor, Heat Transfer, Plate Heat Exchangers

Kaynakça

• [1] Ribeiro CP, Caño Andrade MH. An algorithm for steady-state simulation of plate heat exchangers. J Food Engineer 2002;53:59–66. [CrossRef]
• [2] Butt AG, inventor; USPTO. Pate type heat exchanger and method of construction and repair. US3372453A, patent. 1968.
• [3] Thonon B. Design method for plate evaporators and condensers. 1st Int Conf Process Intensif Chem Ind 1995:37–45.
• [4] Focke WW, Zachariades J, Olivier I. The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangers. Int J Heat Mass Transf 1985;28:1469–1479. [CrossRef]
• [5] Shah RK, Sekulic DP. Fundamentals of Heat Exchanger Design. New Jersey: John Wiley Sons; 2003. [CrossRef]
• [6] Allison J, inventor; India. Plate heat exchanger. IN154238B, patent. 1985.
• [7] Fuerschbach RF, Creighton TP, Fijas DF, inventors; European Patent Office. Plate type heat exchanger. 89201312.9, patent application. 1989.
• [8] Yam YY, Lin TF, Yang BC. Evaporation heat transfer and pressure drop of refrigerant R134a in a plate heat exchanger. Proc ASME Turbo Expo 1997;121.
• [9] William TG, Glen Hubman GC, inventors; USPTO. Brazed plate heat exchanger utilizing metal gaskets and method for making same. US0030043 A1, patent. 2001.
• [10] Heil D, Bruno Metzel K, Schwab E, Alois Tischler MW, inventors; USPTO. Plate heat exchanger and method of making same. US 6,389,696 B1, patent. 2002.
• [11] Grijspeerdt K, Hazarika B, Vucinic D. Application of computational fluid dynamics to model the hydrodynamics of plate heat exchangers for milk processing. J Food Engineer 2003;57:237–242. [CrossRef]
• [12] Dović D, Švaić S. Influence of chevron plates geometry on performances of plate heat exchangers. Teh Vjesn 2007;14:37–45.
• [13] Jain S, Joshi A, Bansal PK. A new approach to numerical simulation of small sized plate heat exchangers with chevron plates. J Heat Transf 2007;129:291–297. [CrossRef]
• [14] Otahal K, Hofer J, inventors; USPTO. Plate heat exchanger having a turbulence generator. US 8,418,752 B2, patent. 2013.
• [15] Krantz J, inventor; USPTO. Plate structure and gasket for a heat exchanger. US 9.212,854 B2, patent. 2015.
• [16] Bogaert R, Böles A. Global performance of a prototype brazed plate heat exchanger in a large reynolds number range. Exp Heat Transf 1995;8:293–311. [CrossRef]
• [17] Palmer SC, Payne WV, Domanski P. Evaporation and condensation heat transfer performance of flammable refrigerants in a brazed plate heat exchanger. NIST Interagency/Internal Rep 2000:6541. [CrossRef]
• [18] Han DH, Lee KJ, Kim YH. Experiments on the characteristics of evaporation of R410A in brazed plate heat exchangers with different geometric configurations. Appl Therm Engineer 2003;23:1209–1225. [CrossRef]
• [19] Gullapalli VS. Estimation of thermal and hydraulic characteristics of compact brazed plate heat exchangers (dissertation). Lund University; 2013. [CrossRef]
• [20] Gullapalli VS, Sundén B. Cfd simulation of heat transfer and pressure drop in compact brazed plate heat exchangers. Heat Transf Engineer 2014;35:358–366. [CrossRef]
• [21] Gullapalli V, Lic T. Design of high efficiency compact brazed plate heat exchangers (BPHE) using CFD. 23rd IIR International Congress of Refrigeration, Prague, 614; 2011. pp.1–11.
• [22] Barzegarian R, Moraveji MK, Aloueyan A. Experimental investigation on heat transfer characteristics and pressure drop of BPHE (brazed plate heat exchanger) using TiO2-water nanofluid. Exp Therm Fluid Sci 2016;74:11–18. [CrossRef]
• [23] Teng TP, Hsiao TC, Chung CC. Characteristics of carbon-based nanofluids and their application in a brazed plate heat exchanger under laminar flow. Appl Therm Engineer 2019;146:160–168. [CrossRef]
• [24] Desideri A, Zhang J, Kærn MR, Ommen TS, Wronski J, Lemort V, et al. An experimental analysis of flow boiling and pressure drop in a brazed plate heat exchanger for organic Rankine cycle power systems. Int J Heat Mass Transf 2017;113:6–21. [CrossRef]
• [25] Kim DY, Kim KC. Thermal performance of brazed metalfoam-plate heat exchanger as an evaporator for organic Rankine cycle. Energy Procedia 2017;129:451–458. [CrossRef]
• [26] Nematollahi O, Abadi GB, Kim DY, Kim KC. Experimental study of the effect of brazed compact metal-foam evaporator in an organic Rankine cycle performance: Toward a compact ORC. Energy Conver Manage 2018;173:37–45. [CrossRef]
• [27] Kandlikar SG, Shah RK. Asymptotic effectiveness-NTU formulas for multipass plate heat exchangers. ASME 1989;111:315–321. [CrossRef]
• [28] Galeazzo FCC, Miura RY, Gut JAW, Tadini CC. Experimental and numerical heat transfer in a plate heat exchanger. Chem Engineer Sci 2006;61:7133–7138. [CrossRef]
• [29] Muley A, Manglik RM. Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates. J Heat Transf 1999;121:110–117. [CrossRef]
• [30] Kumar H. The plate heat exchanger: Construction and design. Institute Chem Engineer Symposium Series 1984;86:1275–1288. [CrossRef]
• [31] Blomerius H, Mitra NK. Numerical investigation of convective heat transfer and pressure drop in wavy ducts. Numer Heat Transf Part A Appl 2000;37:37–54. [CrossRef]
• [32] Kanaris AG, Mouza AA, Paras S V. Optimal design of a plate heat exchanger with undulated surfaces. Int J Therm Sci 2009;48:1184–95. [CrossRef]
• [33] Han W, Saleh K, Aute V, Ding G, Hwang Y, Radermacher R. Numerical simulation and optimization of single-phase turbulent flow in chevron-type plate heat exchanger with sinusoidal corrugations. HVAC R Res 2011;17:186–197. [CrossRef]
• [34] Fernandes CS, Dias RP, Nóbrega JM, Maia JM. Laminar flow in chevron-type plate heat exchangers: CFD analysis of tortuosity, shape factor and friction factor. Chem Engineer Process Process Intensif 2007;46:825–833. [CrossRef]
• [35] Khan TS, Khan MS, Chyu MC, Ayub ZH. Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations. Appl Therm Engineer 2010;30:1058–1065. [CrossRef]
• [36] Manigandan N, Naveenprabhu V, Suresh ML. Experimental investigation of a brazed chevron type plate heat exchanger. Int J Sci Technol Engineer 2015;1:17. [CrossRef]
• [37] Gurel B, Akkaya VR, Goltas M, Sen CN, Guler OV, Kosar MI, et al. Investigation on flow and heat transfer of compact brazed plate heat exchanger with lung pattern. Appl Therm Engineer 2020;175:115309. [CrossRef]
• [38] Fernández-Seara J, Diz R, Uhía FJ. Pressure drop and heat transfer characteristics of a titanium brazed plate-fin heat exchanger with offset strip fins. Appl Therm Engineer 2013;51:502–511. [CrossRef]
• [39] Cremaschi L, Spitler JD, Lim E, Ramesh A. Waterside fouling performance in brazed-plate-type condensers for cooling tower applications. HVAC R Res 2011;17:198–217. [CrossRef]
• [40] Kim MB, Park CY. An experimental study on single phase convection heat transfer and pressure drop in two brazed plate heat exchangers with different chevron shapes and hydraulic diameters. J Mech Sci Technol 2017;31:2559–2571. [CrossRef]
• [41] Jin S, Hrnjak P. Effect of end plates on heat transfer of plate heat exchanger. Int J Heat Mass Transf 2017;108:740–748. [CrossRef]
• [42] Li W, Hrnjak P. Compensating for the end-plate effect on heat transfer in brazed plate heat exchangers. Int J Refrig 2021;126:99–108. [CrossRef]
• [43] Wu J, Ju Y. Comprehensive comparison of small-scale natural gas liquefaction processes using brazed plate heat exchangers. Front Energy 2020;14:683–698. [CrossRef]
• [44] Zhong Y, Deng K, Zhao S, Hu J, Zhong Y, Li Q, et al. Experimental and numerical study on hydraulic performance of chevron brazed plate heat exchanger at low Reynolds number. Processes 2020;8:1076. [CrossRef]
• [45] Jafari A, Sadeghianjahromi A, Wang CC. Experimental and numerical investigation of brazed plate heat exchangers – A new approach. Appl Therm Engineer 2022;200:117694. [CrossRef]
• [46] Ham J, Yong J, Kwon O, Bae K, Cho H. Experimental investigation on heat transfer and pressure drop of brazed plate heat exchanger using LiBr solution. Appl Therm Engineer 2023;225:120161. [CrossRef]
• [47] Fazeli I, Sarmasti Emami MR, Rashidi A. Investigation and optimization of the behavior of heat transfer and flow of MWCNT-CuO hybrid nanofluid in a brazed plate heat exchanger using response surface methodology. Int Comm Heat Mass Transf 2021;122:105175. [CrossRef]
• [48] Mehrarad H, Sarmasti Emami MR, Afsari K. Thermal performance and flow analysis in a brazed plate heat exchanger using MWCNT@water/EG nanofluid. Int Comm Heat Mass Transf 2023;146:106867. [CrossRef]
• [49] Gungor S. Experimental comparison on energy consumption and heat transfer performance of corrugated H-type and L-type brazed plate heat exchangers. Int Comm Heat Mass Transf 2023;144:106763. [CrossRef]
• [50] Pulagam MKR, Rout SK, Sarangi SK. Numerical simulation of a brazed plate heat exchanger using Al2O3-water nanofluid with periodic boundary conditions. WSEAS Trans Heat Mass Transf 2023;18:262–270. [CrossRef]
• [51] Jalili B, Aghaee N, Jalili P, Domiri Ganji D. Novel usage of the curved rectangular fin on the heat transfer of a double-pipe heat exchanger with a nanofluid. Case Stud Therm Engineer 2022;35:102086. [CrossRef]
• [52] Jalili P, Kazerani K, Jalili B, Ganji DD. Investigation of thermal analysis and pressure drop in non-continuous helical baffle with different helix angles and hybrid nano-particles. Case Stud Therm Engineer 2022;36:102209. [CrossRef]
• [53] Kaplan S, Bayramoğlu K, Sarikanat M, Altay L. Numerical study on heat transfer and fluid dynamics in plate heat exchangers: Effects of chevron angle and aspect ratio. J Therm Engineer 2024;10:638–656. [CrossRef]
• [54] Bousri A, Hamadouche A, Khali S, Nebbali R, Beji H. Forced convection coolig of multiple heat sources using open cell metal foams. J Therm Engineer 2021;7:255–270. [CrossRef]
• [55] Aouanouk SA, Mouheb A, Absi R. Numerical study of milk fouling thickness in the channel of plate heat exchanger. J Therm Engineer 2018;4:2464–2470. [CrossRef]
• [56] Zhu CX, Wang CC, Tang YC. Performance and flow distribution of the plate heat exchanger with supercritical fluid of carbon dioxide. J Therm Engineer 2015;1:143–151. [CrossRef]
• [57] Yan YY, Lio HC, Lin TF. Condensation heat transfer and pressure drop of refrigerant R-134a in a plate heat exchanger. Int J Heat Mass Transf 1999;42:993–1006. [CrossRef]
• [58] Hsieh YY, Lin TF. Evaporation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchanger. J Heat Transf 2003;125:852–857. [CrossRef]
• [59] Kuo WS, Lie YM, Hsieh YY, Lin TF. Condensation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heat exchanger. Int J Heat Mass Transf 2005;48:5205–5220. [CrossRef]
• [60] Longo GA, Gasparella A. HFC-410A vaporisation inside a commercial brazed plate heat exchanger. Exp Therm Fluid Sci 2007;32:107–116. [CrossRef]
• [61] Longo GA. R410A condensation inside a commercial brazed plate heat exchanger. Exp Therm Fluid Sci 2009;33:284–291. [CrossRef]
• [62] Palm B, Claesson J. Plate heat exchangers: Calculation methods for singleand two-phase flow. Heat Transf Eng 2006;27:88–98. [CrossRef]
• [63] Longo GA, Gasparella A. Refrigerant R134a vaporisation heat transfer and pressure drop inside a small brazed plate heat exchanger. Int J Refrig 2007;30:821–830. [CrossRef]
• [64] Longo GA. Refrigerant R134a condensation heat transfer and pressure drop inside a small brazed plate heat exchanger. Int J Refrig 2008;31:780–789. [CrossRef]
• [65] Longo GA, Gasparella A. Heat transfer and pressure drop during HFC refrigerant vaporisation inside a brazed plate heat exchanger. Int J Heat Mass Transf 2007;50:5194–5203. [CrossRef]
• [66] Longo GA, Mancin S, Righetti G, Zilio C. Hydrocarbon refrigerants condensation local heat transfer coefficients inside a brazed plate heat exchanger (BPHE). Int J Heat Mass Transf 2023;201:123615. [CrossRef]
• [67] Longo GA, Mancin S, Righetti G, Zilio C. Hydrocarbon refrigerants boiling local heat transfer coefficients inside a brazed plate heat exchanger (BPHE). Int J Refrig 2023;156:113–122. [CrossRef]
• [68] Longo GA. Heat transfer and pressure drop during HFC refrigerant saturated vapour condensation inside a brazed plate heat exchanger. Int J Heat Mass Transf 2010;53:1079–1087. [CrossRef]
• [69] Longo GA. Heat transfer and pressure drop during hydrocarbon refrigerant condensation inside a brazed plate heat exchanger. Int J Refrig 2010;33:944–953. [CrossRef]
• [70] Longo GA. The effect of vapour super-heating on hydrocarbon refrigerant condensation inside a brazed plate heat exchanger. Exp Therm Fluid Sci 2011;35:978–985. [CrossRef]
• [71] Longo GA. Vaporisation of the low GWP refrigerant HFO1234yf inside a brazed plate heat exchanger. Int J Refrig 2012;35:952–961. [CrossRef]
• [72] Longo GA, Zilio C, Righetti G, Brown JS. Condensation of the low GWP refrigerant HFO1234ze(E) inside a brazed plate heat exchanger. Int J Refrig 2014;38:250–259. [CrossRef]
• [73] Longo GA, Mancin S, Righetti G, Zilio C. Boiling of the new low-GWP refrigerants R1234ze(Z) and R1233zd(E) inside a small commercial brazed plate heat exchanger. Int J Refrig 2019;104:376–385. [CrossRef]
• [74] Longo GA, Mancin S, Righetti G, Zilio C. A new model for refrigerant boiling inside brazed plate heat exchangers (BPHEs). Int J Heat Mass Transf 2015;91:144–149. [CrossRef]
• [75] Longo GA, Righetti G, Zilio C. A new computational procedure for refrigerant condensation inside herringbone-type brazed plate heat exchangers. Int J Heat Mass Transf 2015;82:530–536. [CrossRef]
• [76] Longo GA, Zilio C, Righetti G. Condensation of the low GWP refrigerant HFC152a inside a brazed plate heat exchanger. Exp Therm Fluid Sci 2015;68:509–515. [CrossRef]
• [77] Longo GA, Mancin S, Righetti G, Zilio C. Local heat transfer coefficients of R32 and R410A boiling inside a brazed plate heat exchanger (BPHE). Appl Therm Engineer 2022;215:118930. [CrossRef]
• [78] Longo GA, Mancin S, Righetti G, Zilio C. HFC404A vaporisation inside a brazed plate heat exchanger (BPHE): Comparison with the possible long-term low GWP substitutes HC290 (Propane) and HC1270 (Propylene). Appl Therm Engineer 2016;108:1401–1408. [CrossRef]
• [79] Longo GA, Mancin S, Righetti G, Zilio C. Boiling of the new low-GWP refrigerants R1234ze(Z) and R1233zd(E) inside a small commercial brazed plate heat exchanger. Int J Refrig 2019;104:376–385. [CrossRef]
• [80] Longo GA, Mancin S, Righetti G, Zilio C. Local heat transfer coefficients of R32 and R410a condensation inside a brazed plate heat exchanger (BPHE). Int J Heat Mass Transf 2022;194:123041. [CrossRef]
• [81] Claesson J. Correction of logarithmic mean temperature difference in a compact brazed plate evaporator assuming heat flux governed flow boiling heat transfer coefficient. Int J Refrig 2005;28:573–578. [CrossRef]
• [82] Hayes N, Jokar A, Ayub ZH. Study of carbon dioxide condensation in chevron plate exchangers; Pressure drop analysis. Int J Heat Mass Transf 2012;55:2916–2925. [CrossRef]
• [83] Muthuraman S. The characteristics of brazed plate heat. Glob J Res Engineer Mech Mech Engineer 2011;11:11–26.
• [84] Mancin S, Del Col D, Rossetto L. R32 partial condensation inside a brazed plate heat exchanger. Int J Refrig 2013;36:601–611. [CrossRef]
• [85] Rossato M, Del Col D, Muzzolon A, Rossetto L. Flow boiling of R32 inside a brazed plate heat exchanger. Int J Refrig 2016;69:165–174. [CrossRef]
• [86] Pang W, Liu J, He J, Xu X. Thermal performance of brazed plate heat exchangers for a mixed-refrigerant Joule-Thomson cooler. Int J Refrig 2016;61:37–54. [CrossRef]
• [87] Raveendran PS, Sekhar SJ. Experimental studies on domestic refrigeration system with brazed plate heat exchanger as condenser. J Mech Sci Technol 2016;30:2865–2871. [CrossRef]
• [88] Táboas F, Vallès M, Bourouis M, Coronas A. Flow boiling heat transfer of ammonia/water mixture in a plate heat exchanger. Int J Refrig 2010;33:695–705. [CrossRef]
• [89] Mutumba A, Coletti F, Reip A, Mahmoud MM, Karayiannis TG. Experiments and correlations for single-phase convective heat transfer in brazed plate heat exchangers. Heat Transf Engineer 2023;44:211–231. [CrossRef]
• [90] Li W, Hrnjak P. Visualization of two-phase refrigerant flow in the inlet header of brazed plate heat exchangers and its effect on distribution. Int J Refrig 2021;131:483–492. [CrossRef]
• [91] Li W, Hrnjak P. Quantification of two-phase refrigerant distribution in brazed plate heat exchangers using infrared thermography. Int J Refrig 2021;131:348–358. [CrossRef]
• [92] Li W. Flow distribution in brazed plate heat exchangers (dissertation). Urbana, Illinois; University of Illinois at Urbana-Champaign; 2021.
• [93] Navarro-Peris E, Alvarez-Piñeiro L, Schnabel L, Corberan JM. Refrigerant maldistribution in brazed plate heat exchanger evaporators. Part B: Analysis of the influence of maldistribution on the evaporator performance. Int J Refrig 2021;131:312–321. [CrossRef]
• [94] Li W, Hrnjak P. Single-phase flow distribution in plate heat exchangers: Experiments and models. Int J Refrig 2021;126:45–56. [CrossRef]
• [95] Li W, Hrnjak P. Modeling of two-phase refrigerant distribution in brazed plate heat exchangers. Int J Refrig 2022;136:172–183. [CrossRef]
• [96] Will T, Schnabel L, Köhler J. Detailed thermal evaluation of brazed plate heat exchanger using infrared thermography. Chemie-Ingenieur-Technik 2023;95:732–739. [CrossRef]
• [97] Zendehboudi A, Ye Z, Hafner A, Andresen T, Skaugen G. Heat transfer and pressure drop of supercritical CO2 in brazed plate heat exchangers of the tri-partite gas cooler. Int J Heat Mass Transf 2021;178:121641. [CrossRef]
• [98] Sadeghianjahromi A, Jafari A, Wang CC. Numerical investigation of the effect of chevron angle on thermofluids characteristics of non-mixed and mixed brazed plate heat exchangers with experimental validation. Int J Heat Mass Transf 2022;184:122278. [CrossRef]
• [99] Salman M, Prabakaran R, Kumar PG, Lee D, Kim SC. Saturation flow boiling characteristics of R290 (propane) inside a brazed plate heat exchanger with offset strip fins. Int J Heat Mass Transf 2023;202:123778. [CrossRef]
• [100] Gullapalli VS. Modeling of brazed plate heat exchangers for ORC systems. Energy Procedia 2017;129:443–450. [CrossRef]
• [101] Imran M, Usman M, Yang Y, Park BS. Flow boiling of R245fa in the brazed plate heat exchanger: Thermal and hydraulic performance assessment. Int J Heat Mass Transf 2017;110:657–670. [CrossRef]
• [102] Wu J, He T, Ju Y. Experimental study on CO2 frosting and clogging in a brazed plate heat exchanger for natural gas liquefaction process. Cryogenics (Guildf) 2018;91:128–135. [CrossRef]
• [103] Shon BH, Jung CW, Kwon OJ, Choi CK, Tae Kang Y. Characteristics on condensation heat transfer and pressure drop for a low GWP refrigerant in brazed plate heat exchanger. Int J Heat Mass Transf 2018;122:1272–1282. [CrossRef]
• [104] Lee DC, Kim D, Park S, Lim J, Kim Y. Evaporation heat transfer coefficient and pressure drop of R-1233zd(E) in a brazed plate heat exchanger. Appl Therm Engineer 2018;130:1147–1155. [CrossRef]
• [105] Kho T, Müller-Steinhagen H. An experimental and numerical investigation of heat transfer fouling and fluid flow in flat plate heat exchangers. Chem Engineer Res Des 1999;77:124–130. [CrossRef]
• [106] Grigore R, Popa S, Hazi A, Hazi G. Research about correlation between the performance of plate heat exchanger and the number of plates. Proc 3rd WSEAS Int Conf Finite Differ - Finite Elem - Finite Vol - Bound Elem F-and-B ’10 2010:92–97.
• [107] Sundén B. Computational fluid dynamics in research and design of heat exchangers. Heat Transf Engineer 2007;28:898–910. [CrossRef]
• [108] Sevilgen G, Bayram H. Numerical analysis of heat transfer of a brazed plate heat exchanger. Acad Platf J Engineer Sci 2020;8:491–499.
• [109] Lonis F, Luo Y, Andresen J, Maroto-Valer M. Capture of cold energy from liquid nitrogen using a brazed plate heat exchanger. Energy Procedia 2019;158:5622–5628. [CrossRef]
• [110] Martin H. A theoretical approach to predict the performance of chevron-type plate heat exchangers. Chem Engineer Process Process Intensif 1996;35:301–310. [CrossRef]
• [111] Lee DC, Kim D, Cho W, Kim Y. Evaporation heat transfer and pressure drop characteristics of R1234ze(E)/R32 as a function of composition ratio in a brazed plate heat exchanger. Int J Heat Mass Transf 2019;140:216–226. [CrossRef]