Volume: 10 Issue: 5, 9/10/24

Year: 2024

Articles

Research Article

1. Influence of buoyancy forces in MHD non-Newtonian convective nanofluid utilizing Buongiorno’s Model induced by 3D exponential sheet

Saloni Gupta , Parmod Kumar Sharma , Sanjay Kumar , Chinta Mani Tiwari

Page : 1107-1119

Research Article

2. Performance and fluid flow analysis of double pipe heat exchanger using AL2O3-nanofluid

Azhar Hussain Shah1 , Liaquat Ali Memon , Muhammad Ramzan Luhur , Qadir Buksh Jamali , Sajjad Hussain Bhangwar , Umair Ahmed Rajput

Page : 1120-1136

Research Article

3. Heat transfer characteristics of magnetohydrodynamic Casson stratified hybrid nanofluid flow past a porous stretching cylinder

Jintu Mani Nath , Ashish Paul , Tusar Kanti Das

Page : 1137-1148

Research Article

4. Thermal analysis of photovoltaic-thermoelectric hybrids

Rida Y. Nuwayhid , Mohamad S. Rahal , Yamen Z. Makarem , Roger R. Achkar

Page : 1149-1163

Research Article

5. Energy, exergy and performance analysis of a 380 kWP roof-top PV plant assisted with data-driven models for energy generation

Abhijeet Rathore , - Almas , Sivasankari Sundaram

Page : 1164-1183

Research Article

6. Optimizing the thermal performance of a double-pipe heat exchanger using twisted tapes with variable cuts and Fe3O4 nanofluid

K. P. V. Krishna Varma , N. S. Naveen , P. S. Kishore , Satish Pujari , Krishna Jogi , V. Dhana Raju

Page : 1184-1197

Research Article

7. Optimum insulation thickness for external building walls for different climate zone in India

Mohd Shahid , Munawar Nawab Karimi , Atul Kumar Mishra

Page : 1198-1211

Research Article

8. Effect of compression ratio and load on performance and emission behavior of VCR-CRDI engine fueled with Moringa oleifera biodiesel

Vasant Patel , Vyomesh Buch

Page : 1212-1225

Research Article

9. Experimental study on the combustion of gaseous based fuel (LPG) in a tangential swirl burner of a steam boiler

Karrar S. Hasan , Mohammed Al-fahham , Wisam A. Abd Al-wahid , Hasan Hadi Khwayyir , Ahmed R. Kareem , Saif S. Hasan , Jameel Al-naffakh

Page : 1226-1240

Research Article

10. The effect of operating conditions and climate change on the performance of the photopholtaic Trombe wall: An empirical estimate

Abdullah A. Abdullah , Faris S. Attulla , Omer Ahmed , Sameer Algburi , Raid W. Daoud

Page : 1241-1252

Research Article

11. Thermodynamic entropy of a magnetized nanofluid flow over an inclined stretching cylindrical surface

Mahesh Garvandha , Nagaraju Gajjela , Vamsikrishna Narla , Devendra Kumar

Page : 1253-1265

Research Article

12. Estimation and analysis of exergy loss and performance evaluation of marine freshwater generating system

Jitendra Singh Pal , S. N. Sapali , Prashant Deshmukh

Page : 1266-1274

Research Article

13. Experimental and computational study of heat transfer and flow structure of slotted impinging jet

S. Mohamed Illyas , B. R. Ramesh Bapu , A. Muthu Manokar

Page : 1275-1291

Research Article

14. An experimental study for a single-pass solar air heater integrated with artificial roughness

Nabaa M. Bader , Khudheyer S. Mushatet

Page : 1292-1305

Research Article

15. Investigation of a standard gate valve in terms of flow rate, opening distance and wedge angle with CFD

Soner Enekçi , Üsame Demir , Kadir Yılmaz

Page : 1306-1322

Research Article

16. New design for the cold part of heat pipes using functionally graded material in heat sink with variable thickness fins: An analytical approach

Mojtaba Babaelahi , Mohammad Amin Babazadeh , Mahdi Saadatfar

Page : 1323-1334

Research Article

17. Experimental investigation to evaluate thermal performance of a solar cooker with evacuated tube solar collector using different heat transfer fluids

Yunis Khan , Abhishek Tevatia , D. Apparao , Nagendra Singh , Subhash Mishra

Page : 1335-1346

Research Article

18. Estimation of wind speed by artificial intelligence method: A case study

Enas F. Aziz , Raid W. Daoud , Sameer Algburi , Omer Ahmed , Khalil F. Yassen

Page : 1347-1361

Reviews

Review

19. Biodiesel production from waste cooking oil: A review on production methods, recycling models, materials and catalysts

Atefeh Ahmadbeigi , Mahdi Mahmoudi , Leila Fereidooni , Mojtaba Akbari , Alibakhsh Kasaeian

Page : 1362-1389

Review

20. A state-of-the-art review on thermo fluid performance of brazed plate heat exchanger for HVAC application

Madhu Kalyan Reddy Pulagam , Sachindra Rout , Sunil Kumar Sarangi

Page : 1390-1410

Aim and Vision: Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Type of Publications: Research, Review, Short communications, Technical notes, Letters, Editorials, Case reports, Lecture notes, Keynote speeches, Conference extended papers, Book reviews etc., Please contact us for any other types.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering


http://eds.yildiz.edu.tr/journal-of-thermal-engineering/ForAuthors

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Free.

Download Cover Image

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering