Volume: 11 Issue: 1 , 1/31/25

Year: 2025

Research Article

Research Article

1. Nano-additive blends examination of performance and emission profile of CI engines fuelled with waste cooking oil based-biodiesel

Samson K. Fasogbon , Sunday Oyedepo

Page: 1-15

Research Article

2. Effect of lower rate of exhaust gas recirculation on CI engine characteristics fueled with Prosopis juliflora biodiesel: An experimental study

B. Musthafa , B. Saravanan , S. Senthur Prabu , Asokan M. A. , S. Sujai

Page: 16-24

Research Article

3. Numerical investigation to augmentation of heat transfer in solar air heater with arc shape ribs on absorber plate

Gaith Monem Fadala , Ahmed Hashem Yousef , Karrar S. Hasan

Page: 25-39

Research Article

4. Exploring low-GWP refrigerants for enhanced domestic refrigerator performance: A comprehensive investigation

Mohammad Hasheer Shaik , Srinivas Kolla , Yellapragada Naga Venkata Sairam

Page: 40-48

Research Article

5. Numerical investigation on comparative performance assessment of solar air heater with different artificial roughness elements in a triangular duct

Rafiuzzama Shaik , Eshwaraiah Punna , S. K. Gugulothu

Page: 49-61

Research Article

6. Numerical investigation of improved metal foam heat sink with Fe3O4-H2O nanofluid

T. Bouacida , R. Bessaïh

Page: 62-78

Research Article

7. Performance enhancement of thermal energy storage system using ZrO2 doped paraffin wax

Shri Krishna Mishra , Mukesh Gupta , Rahul Kumar , Abhishek Sharma

Page: 79-93

Research Article

8. Modeling and co-simulation of an integrated solar heating system and direct contact membrane distillation module

Mouad Bousmaha , Ahmed Remlaoui , Driss Nehari

Page: 94-111

Research Article

9. Thermal behavior and evolved gas analysis for pyrolysis of olive pomace, coal, and their blends using TGA/FTIR

Hasan Merdun , Balkis Yahyaoui

Page: 112-126

Research Article

10. Numerical analysis of nanofluid flow over a radiating oscillating plate with hall current and MHD at enhanced temperature

Sarala S , E. Geetha

Page: 127-140

Research Article

11. Numerical investigation of hydrothermal performances of minichannel heat sink using porous media

Rajesh Kumar , Mohammad Zunaid , Radhey Shyam Mishra

Page: 141-158

Research Article

12. Fe3O4, Au nanoparticles influence on bio-nanofluid thermal conductivity

Ali J. Ali , Bahaa E. Eddin , Sanaa T. Mousa Al-musawi , Hasan Shakir Majdi , Miqdam T. Chaichan

Page: 159-169

Research Article

13. Investigation on Delonix regina biodiesel blends on diesel engine with 1-butanol-diesel blends to test engine performance, combustion and emission characteristics

Sumathy Muniamuthu , K. Sunil Kumar , S. Deepa , Muniyandi Elangovan , Amit Verma , Mahesh M. Sonekar

Page: 170-180

Research Article

14. An experimental study on the impact of porous media in improving the heat transfer performance characteristics of photovoltaic-thermal system

Amjad H. Hamzawy , Qahtan A. Abed

Page: 181-195

Research Article

15. Studying the influence of using metal foam baffles on the performance of double-pipe heat exchanger

Zuhair S. Rabeeah , Abbas J. Jubear , Hussain R. Al Bugharbee

Page: 196-214

Research Article

16. Effect of diethyl ether and isobutanol as fuel additives on the diesel engine attributes fueled with subabul seed biodiesel

K. Yamini , P. S. Kishore , V. Dhana Raju

Page: 215-225

Research Article

17. Thermal conductivity of porous plastics manufactured by 3D printing: Controlling the design of the cavities and corresponding effects

Ahmed K. Muhammad , Tawfeeq W. Mohammed , Kadhim K. Resan

Page: 226-239

Research Article

18. Impact of memory and long-range interaction in a two-dimensional semi-infinite solid cylinder

Navneet Kumar Lamba

Page: 240-253

Research Article

19. Synergy of non-uniform heat source/sink and variable thermal conductivity on stagnation point flow of Casson fluid over a convective stretching sheet

C. Arruna Nandhini , S. Jothimani , Ali J. Chamkha

Page: 254-269

Research Article

20. Experimental and numerical study of fluid flow and heat transfer in the impinging of inline round jets

B. Venkata Sai Raghu Vamsi , P. Raveendiran , Malladi R. Ch. Sastry

Page: 270-289

Aim and Vision: Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Type of Publications: Research, Review, Short communications, Technical notes, Letters, Editorials, Case reports, Lecture notes, Keynote speeches, Conference extended papers, Book reviews etc., Please contact us for any other types.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering


http://eds.yildiz.edu.tr/journal-of-thermal-engineering/ForAuthors

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Please check our the journal's Ethical Principles and Publication Policy

Free.

Download Cover Image

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering