Volume: 11 Issue: 3 , 5/16/25

Year: 2025

Research Article

Research Article

1. Assessment of student thermal comfort perception of spaces in education building with different ventilation strategies after COVID-19

Resul Ozluk , Turkan Goksal Ozbalta , Kubra Gungor

Page: 623-642

Research Article

2. An experimental investigation of an inclined solar chimney integrated into residential buildings with different materials construction for natural ventilation in a hot-arid climate

Benali Oussama , Dobbi Abdelmadjid , Hassini Noureddine , Mohamed El-amine Slimani , Hadjadj Abdessamia

Page: 643-658

Research Article

3. Investigation on gasification of waste textile using advanced thermodynamic equilibrium model to address textile waste pollution

Mohd Zeeshan , Rohan R. Pande , Purnanand V. Bhale

Page: 659-674

Research Article

4. Computational investigations of perforated annular fins under natural convection heat transfer

Md. Shaukat Ali , Naveen Sharma , Bhongiri Sai Ganesh

Page: 675-684

Research Article

5. Numerical investigation of mixed convection in a square lid-driven cavity with influence of orientation and nanoparticle addition on heat transfer characteristics: Multi-objective optimization approach

T. Ravi Kumar Reddy , D. R. Srinivasan

Page: 685-702

Research Article

6. Experimental and simulation study to evaluate effect of radial air injection on performance of motorcycle silencers

Nilaj N. Deshmukh , Kishor V. Mane , Jebastin Nadar , Reuben Pereira , Rahul Shelar , Rickson David

Page: 703-715

Research Article

7. Effect of various reactor temperatures for mixed metallic oxides in chemical looping combustion system for carbon capture

Mit Manojbhai Sheth , Atal Bihari Harichandan , Rameshkumar Bhoraniya

Page: 716-726

Research Article

8. Effect of higher alcohol on injector deposit and wear in compression ignition engine

Faheem Ahmed Solangi , Liaquat Ali Memon , Saleem Raza Samo , Muhammad Ramzan Luhur , Umair Ahmed Rajput , Ali Murtaza Ansari , Ali Raza Solangi

Page: 727-739

Research Article

9. A novel method for forced convection heat transfer in 2D skewed cavities using a non-orthogonal mesh

Khaled Fawzi Shatnawi , Saad Bin Mansoor , Bekir Sami Yiılbas

Page: 740-752

Research Article

10. Optimization of biodiesel powered CI engine process parameters using AHP and Taguchi grey method – A hybrid approach

Krishnamoorthy Natarajan , Saravanan Subramani , Ravi Govindasamy , Paul Durai Kumar

Page: 753-764

Research Article

11. Heat and mass transfer analysis of unsteady MHD Carreu nanofluid flow over a stretched surface in a porous medium with Stefan blowing condition

R. Geetha , B. Reddappa , A. Sumithra , B. Rushi Kumar , B. Prabhakar Reddy

Page: 765-779

Research Article

12. Magnetohydrodynamic natural convection of complex fluids in a square porous cavity: A numerical simulation

S. Vigneshwari , B. Reddappa , B. Rushi Kumar

Page: 780-799

Research Article

13. MHD stream past an inclined surface with diffusion-thermo and viscous dissipation sequels

Bhaskarjyoti Deka , Rita Choudhury

Page: 800-810

Research Article

14. Heat transfer enhancement by laterally impinging air jet on semi-circular grooved surface

A. M. Rathod , Chandrashekhar K. Jadhav , Rohit S. Tarte , Nitin P. Gulhane , Jan Taler , Dawid Taler , Pawel Oclon

Page: 811-823

Research Article

15. Strategic design and optimization of ultra-high-frequency regenerators for miniature pulse tube cryocoolers: A roadmap to achieve high efficiency and compact

Chetan O. Yadav , P. V. Ramana

Page: 824-844

Research Article

16. Numerical modelling of 3D magnetohydrodynamics chemically reacting permeable sheet influenced by free stream convection nanofluid flow

Smita Yadav , Sanjay Kumar , Parmod Kumar Sharma , Vinita Makkar , Khyati Dang

Page: 845-857

Research Article

17. Experimental performance evaluation of a solar powered evaporative cooling system for preservation of agricultural produce in tropical region

Mfon O. Udo , Sunday O. Oyedepo , Sunday A. Afolalu , Samson O. Ongbali , Oluwaseun Kilanko , Richard O. Leramo , Bahaa Saleh , Joseph O. Dirisu , James A. Omoleye , Gbolahan Odewole , Philip O. Babalola , Samson K. Fasogbon , Ejike C. Solomon , Blessed Bolarinwa Odunayo , Idemili O. Uchechukwu

Page: 858-879

Review

Review

1. The use of turpentine as additive for diesel oil. A review

Robert Madalin Chivu , Jorge Martins , Florin Popescu , Ion V. Ion , Uzuneanu Krisztina , Michael Fratita

Page: 880-895

Review

2. Heat transfer performance of Li-ion battery pack using composite phase change material: A review

Vinayak T. Mandlik , Sandipkumar Sonawane , Milind Patil

Page: 896-921

Review

3. Soiling mechanics of solar photovoltaics: A review

Kudzanayi Chiteka , Christopher C. Enweremadu

Page: 922-948

Aim and Vision: Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Type of Publications: Research, Review, Short communications, Technical notes, Letters, Editorials, Case reports, Lecture notes, Keynote speeches, Conference extended papers, Book reviews etc., Please contact us for any other types.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering


http://eds.yildiz.edu.tr/journal-of-thermal-engineering/ForAuthors

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Please check our the journal's Ethical Principles and Publication Policy

Free.

Download Cover Image

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering