Volume: 11 Issue: 4 , 7/31/25

Year: 2025

Research Article

Research Article

1. Numerical investigation of slip flow and temperature jump of nanofluid in a microchannel with square obstacles using lattice Boltzmann method

Habib Karimi , Kourosh Javaherdeh

Page: 949-960

Research Article

2. Kinetics and mathematical model of sugarcane bagasse drying in laboratory scale rotary dryer

Melvin Emil Simanjuntak , Paini Sri Widyawati

Page: 961-969

Research Article

3. Performance and emissions assessment of a spark-ignition engine fueled with ethanol-, methanol- and acetone-gasoline blends

Mehrez Gassoumi , Fakher Hamdi , Zouhaier Boutar , Mahdi Dhawi , Zouhaier Khalfet , Aliya Fazal , Raja Mazuir Raja Ahsan Shah , Ridha Ennetta , Hakan Serhad Soyhan

Page: 970-981

Research Article

4. Thermo-hydrodynamic analysis and exergy destruction minimization in a three- dimensional corrugated channel working with a ferrofluid and an external magnetic field

Abdelaziz Boumaiza , Mahfoud Kadja , Cherif Ould Lahoucine , Zakaria Korei

Page: 991-1010

Research Article

5. The impact of electrode design parameters on the thermal behavior of a lithium-ion battery

Ahmed F. Al-neama , Harvey Thompson

Page: 1011-1023

Research Article

6. Enhancement of thermal efficiency of a wet cooling tower using magnetite nanofluid with different stabilizers

Berkman İşçi , Abdulghani Almaksour , Kıymet Yildirim , Nurettin Eltugral , Kamil Arslan

Page: 1024-1039

Research Article

7. Effects of radiation and chemical reaction due to graphene oxide nanofluid flow in concentric cylinders

Jagadeeshwar Pashikanti , Susmitha Priyadharshini D R , Santhosh Thota

Page: 1040-1050

Research Article

8. Evaluation of energy efficiencies in a varied steam release domestic pressure cooker

Hesborn R. Ayub , Willis J. Ambusso , Daudi M. Nyaanga

Page: 1051-1063

Research Article

9. Integrated absorption refrigeration and gas turbine power plant system: Performance enhancement through intake air cooling

Layth Abed Hasnawi Al-rubaye , Loay M. Mubarak , Ahmed Al-samari

Page: 1075-1093

Research Article

10. Machine learning in flow boiling: predicting bubble lift-off diameter despite data limitations

Atta Heydarpour Tabrizi , Mousa Mohammadpourfard , Mostafa Mohammadpourfard

Page: 1094-1118

Research Article

11. Thermal transmittance analysis in Tehran residential units with an approach to building roof insulation simulation

Ashkan Hassani , Shooka Khoshbakht Bahramani

Page: 1120-1134

Research Article

12. Analysis of energy and exergy of a thermal storage system using multiple phase change material

Jayaprakash V , Ganesan S , Beemkumar N , Sunil Kumar M

Page: 1160-1175

Research Article

13. Computational investigation and exergy analysis of swirling flow in vortex tube

Hitesh R. Thakare

Page: 1176-1192

Research Article

14. Temperature evolution within a solar panel using a cooling source of varying sizes and shapes in the presence of a hybrid nanofluid

Boubekeur Ghazi , Syham Kadri , Razli Mehdaoui

Page: 1193-1230

Research Article

15. An in-depth numerical investigation of a solar latent heat storage unit incorporating phase change materials

Mustapha Faraji , Kenza Oudaoui

Page: 1231-1244

Research Article

16. Machine learning enhanced hybrid energy storage management system for renewable integration and grid stability optimization in smart microgrids

Ali Paşaoğlu , Ashkan Habibnezhad

Page: 1267-1301

Review

Review

1. Recent advancements, challenges in recycling of waste plastic using microwave assisted catalytic co-pyrolysis of biomass and waste plastic for production of value added chemicals: a review

Ekin Paylan , Hafiz Miqdad Masood

Page: 982-990

Review

2. Recent trends in the development and growth of solar technologies: a review

K Sunıl Kumar , Raviteja Surakasi , Kumar Govindhasamy , Sudha S , Grynal D'mello , B.t. Tharanisrisakthi

Page: 1064-1074

Review

3. A review on effect of various artificial roughness on heat transfer enhancement in a channel flow

Sudharani Panda , Rakesh Kumar

Page: 1135-1147

Review

4. Advances in passive heat transfer enhancement for heat exchangers: a comprehensive review

Muhammad Ali Khan , Muhammad Ilyas , Khalid Waheed , Inamul Haq , Fatih Aydogan

Page: 1148-1159

Aim and Vision: Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Type of Publications: Research, Review, Short communications, Technical notes, Letters, Editorials, Case reports, Lecture notes, Keynote speeches, Conference extended papers, Book reviews etc., Please contact us for any other types.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering


http://eds.yildiz.edu.tr/journal-of-thermal-engineering/ForAuthors

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Free.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering