Volume: 11 Issue: 2, 3/24/25

Year: 2025

Articles

Research Article

1. An experimental and numerical analysis on the effective utilization of waste heat from a ladle preheating system through a heat exchanger system

Baji Katta , Manjini Sambandam , M. Premlatha , Saravanan Chandrasekaran

Page : 291-300

Research Article

2. Performance optimization of oxy-fuel combustion diesel engine with EGR based on fuel injection parameters using response surface methodology (RSM)

Raghavendra Ugraram , R. Meenakshi Reddy , B Chandra Mohana Reddy

Page : 301-313

Research Article

3. Effect of the design variables on the vortex water turbine performance

Hussein Muhammad Zainal , Omer K. Ahmed

Page : 314-330

Research Article

4. Experimental investigation of convective heat transfer performance using sporadic flow divider type inserts

Suryaji S. Kale , Sanjaykumar S. Gawade

Page : 331-343

Research Article

5. Unsteady magnetohydrodynamic free convection flow of Al2O3–Cu/water nanofluid over a permeable linear stretching sheet through a porous medium with viscous dissipation and heat source/sink

Joel Mathews , Hymavathi Talla

Page : 344-356

Research Article

6. Mitigating solar heat gain through windows of buildings by reflective films: A case study in Iraq

Tawfeeq W. Mohammed , Dalmn Y. Taha

Page : 357-376

Research Article

7. Numerical analysis of spiral tube heat exchanger circulated with zinc oxide nanofluids

K. P. V. Krishna Varma , Kavati Venkateswarlu , Teku Kalyani , S. Hemalatha , P. Vijaya Kumar

Page : 377-389

Research Article

8. Enhancing heat efficiency in arid environments using a PVT collector for revealed facade shelter

Mohamed Cherif Benzid , Boubekeur Dokkar , Abdelghani Boubekri

Page : 390-406

Research Article

9. Heat transfer intensification of ethylene glycol dispersed with nano alumina in a spiral tube heat exchanger for application in solar thermal systems

Ardhani Satya Bhanu Prasanna , Koona Ramji , Manepalli Sailaja , D. Asirinaidu

Page : 407-421

Research Article

10. Enhancing aerodynamic efficiency with a moving surface panel on a NACA 2412 airfoil

Ravichandrakumar Kumar Bhaskar , Ganapathy Subramanian L. R.

Page : 422-433

Research Article

11. Evaluation on fire incident of electric vehicle spaces onboard ferries with using fire dynamics simulations

Tolga Ayci , Baris Barlas , Aykut I. Olcer

Page : 434-447

Research Article

12. Stability analysis of the mixed convective flow of Jeffrey nanofluid through a porous medium

Harsha S. V. , Chandra Shekara , Hemanth Kumar C.

Page : 448-463

Research Article

13. Experimental study of temperature changes in a solar chimney

Ammar Semane , Razika Ihaddadene , Elhouas Bedjeghit , Belhi Guerira , Nabila Ihaddadene

Page : 464-475

Research Article

14. Techno-economic analysis of solar still with nano-phase change material and heating coil: A novel approach for sustainable development

Anand Kushwah , Abdhesh Kumar , M. K. Gaur

Page : 476-492

Research Article

15. Influence of curved trapezoidal winglet vortex generators on thermal-hydraulic performance in fin-and-tube heat exchangers

Alisan Gonul

Page : 493-507

Research Article

16. Performance improvement of a decayed flow heat exchanger using spiral flow and nanofluid

Walaa M. Hashim , Faten N. Al Zubaidi , Huda A. Al Salihi

Page : 508-518

Research Article

17. Thermal analysis and energy requirement of wall and window components for buildings with different orientations

Meral Ozel , Serhat Sengur

Page : 519-549

Research Article

18. Enhancing flat plate collectors’ efficiency by minimizing optical losses through vacuum glazing and ethylene glycol-diamond-alumina nanofluid

Muhammad Shehram , Muhammad Najwan Hamidi , Aeizaal Azman A. Wahab , M. K. Mat Desa

Page : 550-576

Research Article

19. Hydrothermal investigation of a nanofluid flow in a compound microchannels

Sarab Salih Shekho , Ahmed Fouad Al Neama

Page : 577-602

Reviews

Review

20. Demolition wastes in the global construction industry: An overview of research perspective from 2001 to 2020

Abubakar Sadiq Mahmoud , Mahmoud Hijab Abubakar , Zulfikar Adamu , Jamilu Adamu Garkuwa

Page : 603-621

Aim and Vision: Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Type of Publications: Research, Review, Short communications, Technical notes, Letters, Editorials, Case reports, Lecture notes, Keynote speeches, Conference extended papers, Book reviews etc., Please contact us for any other types.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering


http://eds.yildiz.edu.tr/journal-of-thermal-engineering/ForAuthors

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Free.

Download Cover Image

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering