BibTex RIS Kaynak Göster

INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL

Yıl 2016, Cilt: 6 Sayı: 1, 33 - 39, 23.07.2016

Mustafa Ay Gültekin Basmacı

Öz

In this study, an experimental investigation on cutting forces, surface roughness and the hardness of material after machining in turning of 17-4 PH stainless steel using wiper and conventional insert cutting tools with dry cutting condition werepresented. The influences of feed rate, depth of cut, and corner radius on surface roughness, cutting force and material hardnesswere examined. In order to optimize the turning process, Taguchi optimization method has been used. The influence of each parameter on obtained results was determined by using analysis of variance(ANOVA). The relationship between dependent parameters and independent parameters were modeled by Regression analysis. The optimal machinability of 17-4PH stainless steel with coated carbide insert was successfully determined in this study

Anahtar Kelimeler

Anova Taguchi method wiper and conventional tools Surface roughness cutting force Hardness

Yıl 2016, Cilt: 6 Sayı: 1, 33 - 39, 23.07.2016

Mustafa Ay Gültekin Basmacı

Öz

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA56CJ36BM
Bölüm Makaleler
Yazarlar

Mustafa Ay Bu kişi benim

Gültekin Basmacı Bu kişi benim

Yayımlanma Tarihi 23 Temmuz 2016
Yayımlandığı Sayı Yıl 2016 Cilt: 6 Sayı: 1

Kaynak Göster

APA Ay, M., & Basmacı, G. (2016). INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT, 6(1), 33-39.
AMA Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. Temmuz 2016;6(1):33-39.
Chicago Ay, Mustafa, ve Gültekin Basmacı. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT 6, sy. 1 (Temmuz 2016): 33-39.
EndNote Ay M, Basmacı G (01 Temmuz 2016) INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT 6 1 33–39.
IEEE M. Ay ve G. Basmacı, “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”, TOJSAT, c. 6, sy. 1, ss. 33–39, 2016.
ISNAD Ay, Mustafa - Basmacı, Gültekin. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT 6/1 (Temmuz 2016), 33-39.
JAMA Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. 2016;6:33–39.
MLA Ay, Mustafa ve Gültekin Basmacı. “INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL”. TOJSAT, c. 6, sy. 1, 2016, ss. 33-39.
Vancouver Ay M, Basmacı G. INVESTIGATION OF THE EFFECTS OF CONVENTIONAL AND WIPER COATED CARBIDE TOOLS WITH DRY CUTTING ON CUTTING FORCES, SURFACE ROUGHNESS, AND MATERIAL HARDNEES IN TURNING 17-4 PH STAINLESS STEEL. TOJSAT. 2016;6(1):33-9.