Development and Performance Evaluation of a Solar Powered Lawn Mower

Yıl 2021, Cilt: 2 Sayı: 2, 348 - 362, 31.12.2021

Babatunde Soyoye

Öz

The continuous increase in the cost of fuel and the effect of emission of gases from burned fuel into the atmosphere when operating engine powered lawn mower has necessitated the use of the abundant solar energy from the sun as a power source of a lawn mower. A solar powered lawn mower was designed, fabricated and assembled on the basis of the general principle of mowing. The components of the lawn mower are; direct current (DC) motor, rechargeable battery, solar panel, galvanized steel blade of various thicknesses and shapes, and a speed controller. The required torque needed to drive the galvanized steel blade was achieved through the DC motor. The speed of the DC motor was controlled by the speed controller with the resistance in the circuit and allowed the motor to drive the blade at varied speeds. The battery recharged through the solar charging circuit, which comprises of a solar panel and charge controller. Performance evaluation was conducted on the developed mower with various thicknesses (1 mm, 1.5 mm and 2 mm) and shapes of the cutting blade (two, three and four blades). It was found that the cutting efficiency of the mower ranges from 70.50% - 84.10%, also the cutting capacity ranges from 0.05 ha h-1 - 0.27 ha h-1, the uncut area was also found to range from 15.90% - 29.50%.

Anahtar Kelimeler

Lawn mower, solar panel, environmental pollution, cutting efficiency, cutting capacity

Kaynakça

• Dalal SS, Sonune VS and Gawande DB (2016). Manufacturing of solar grass cutter. International Journal of Research in Advent Technology, 352–355. Special Issue. National Conference “CONVERGENCE 2016”, 06th-07th, April 2016.
• Dutta PP, Baruah A, Konwar A and Kumar VA (2016). Technical review of lawn mower technology. ADBU Journal of Engineering Technology, 4(1): 4-7.
• Fernandez G and Krishnasamy VA (2018). Fully automated lawn mower using solar panel. Journal of Advanced Research in Dynamical and Control Systems. 7(07): 977-983.
• Igbokwe JO, Okafor BE and Ehujuo US (2019). Development of a solar powered lawn mower. International Journal of Engineering and Technology, 6(03): 104-108.
• Mgbemu EN (2005). Modern physics, First Edition. Spectrum Limited, Ibadan. pp72.
• National Research Foundation (NRF) (2010). Communication astronomy in school. Astronomy Activities/Demostrations, Cape Town, South Africa.
• Prasanthi SG and Balaiah R (2017). Fabrication of solar powered lawnmower. International Journal of Scientific Research in Science, Engineering and Technology (IJSRSET). 3(8): 477-480.
• Satwik D, Rao NR and Reddy GS (2015). Design and Fabrication of lever operated solar lawn mower and contact stress analysis of spur gears. International Journal of Science, 4(8): 2815-2821.
• Sinha Y and Mathur SM (2020). Development and performance evaluation of solar powered lawn mower. International Journal of Current Microbiology and Applied Sciences, 9(5): 3378-3384.
• Tanimola O, Diabana P and Bankole Y (2014). Design and development of a solar powered lawn mower. International Journal of Science and Engineering Research, 5(6): 215-220.