Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı

Yunus Sayan; Jung-sik Kim; Houzheng Wu

EN TR

Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı

Abstract

Bu çalışmada, tek aşamalı ortak sinterleme yöntemiyle yapılan anot destekli, düzlemsel tek odacıklı katı oksit yakıt pilinin performansı test edilmiştir. Ek olarak, azaltılmış elektrolit kalınlığının ve arttırılan anot kalınlığının (sinterleme sırasında düşük eğrilik elde edilmesinde faydalı olduğu kanıtlandığından dolayı) pil performansı üzerindeki etkileri araştırılmıştır. Tüm piller katot, elektrolit ve anot olarak: gadolinyum katkılı seryum-lantan stronsiyum kobaltit ferrit CGO-LSCF, gadolinyum katkılı seryum (CGO) ve nikel oksit- gadolinyum katkılı seryumdan (NiO-CGO) oluşmuştur. Her bir pil farklı kalınlıkta ve farklı kalınlık oranlarında gözenekli ve çok katmanlı yapılar halinde yapılmıştır. Bu pillerin performansları 600˚C sıcaklıkta tek haznede metan-oksijen karışımlarında test edilmiştir. Bu çalışma kapsamında anot kalınlığı 800 µm, elektrolit kalınlığı 20 µm ve katot kalınlığı 40 µm olan nihai düzlemsel pilin maksimum güç yoğunluğu ve açık devre voltajı, metan-oksijen oranı (R)’nın 1 olduğu ortamda sırasıyla 30.69 mW cm-2 ve 0.71 V olarak elde edilmiştir.

Keywords

Katı oksit yakıt pili, Tek odacıklı, Ortak sinterleme, Pil imalatı, Pil performansı

Supporting Institution

Çalışma; TC Milli Eğitim Bakanlığı, EPSRC'nin Hindistan-İngiltere İşbirliğine Dayalı Araştırma Girişiminin “ Katı Oksit Yakıt Pillerinin Hızlandırılmış Yaşlanma ve Bozulmasının Modellenmesi” Projesi (EP/I037059/1) ve EPSRC'nin İngiltere-Kore Ortak Araştırma Etkinliğinin “KOYP Yığınlarının İzlenmesi ve Kontrolü İçin Yeni Tanılama Araçları ve Teknikleri” Pprojesi (EP/M02346X/1) tarafından desteklenmiştir

References

Briault, P., Rieu, M., Laucournet, R., Morel, B., & Viricelle, J.-P. (2014). Anode supported single chamber solid oxide fuel cells operating in exhaust gases of thermal engine. Journal of Power Sources, 268, 356–364. https://doi.org/10.1016/j.jpowsour.2014.06.061
Bucher, E., & Sitte, W. (2004). Defect chemical modeling of (La, Sr)(Co, Fe)O3-δ. Journal of Electroceramics, 13(1–3), 779–784. https://doi.org/10.1007/s10832-004-5192-x
Bucher, E., & Sitte, W. (2011). Long-term stability of the oxygen exchange properties of (La,Sr)1−z(Co,Fe)O3−δ in dry and wet atmospheres. Solid State Ionics, 192(1), 480–482. https://doi.org/10.1016/j.ssi.2010.01.006
Bucher, E., Sitte, W., Klauser, F., & Bertel, E. (2012). Impact of humid atmospheres on oxygen exchange properties, surface-near elemental composition, and surface morphology of La0.6Sr0.4CoO3-δ. Solid State Ionics, 208, 43–51. https://doi.org/10.1016/j.ssi.2011.12.005
Ding, C., Lin, H., Sato, K., Amezawa, K., Kawada, T., Mizusaki, J., & Hashida, T. (2010). Effect of thickness of Gd0.1Ce0.9O1.95 electrolyte films on electrical performance of anode-supported solid oxide fuel cells. Journal of Power Sources, 195(17), 5487–5492. https://doi.org/10.1016/j.jpowsour.2010.03.075
Guo, Y., Bessaa, M., Aguado, S., Steil, M. C., Rembelski, D., Rieu, M., … Farrusseng, D. (2013). An all porous solid oxide fuel cell (SOFC): a bridging technology between dual and single chamber SOFCs. Energy & Environmental Science, 6(7), 2119. https://doi.org/10.1039/c3ee40131f
Hao, Y., Shao, Z., Mederos, J., Lai, W., Goodwin, D. G., & Haile, S. M. (2006). Recent advances in single-chamber fuel-cells: Experiment and modeling. Solid State Ionics, 177(19–25), 2013–2021. https://doi.org/10.1016/j.ssi.2006.05.008
Hayd, J., Dieterle, L., Guntow, U., Gerthsen, D., & Ivers-Tiffée, E. (2011). Nanoscaled La0.6Sr0.4CoO3-δ as intermediate temperature solid oxide fuel cell cathode: Microstructure and electrochemical performance. Journal of Power Sources, 196(17), 7263–7270. https://doi.org/10.1016/j.jpowsour.2010.11.147
Hibino, T., Hashimoto, A., Inoue, T., Tokuno, J., Yoshida, S., & Sano, M. (2000). Single-chamber solid oxide fuel cells at ıntermediate temperatures with various hydrocarbon-air mixtures. Journal of The Electrochemical Society, 147(8), 2888–2892. https://doi.org/10.1149/1.1393621
Hibino, T., Tsunekawa, H., Tanimoto, S., & Sano, M. (2000). Improvement of a single-chamber solid-oxide fuel cell and evaluation of new cell designs. Journal of The Electrochemical Society, 147(4), 1338. https://doi.org/10.1149/1.1393359

Ii, J. C. F., & Chuang, S. S. C. (2009). Investigating the CH4 reaction pathway on a novel LSCF anode catalyst in the SOFC. Catalysis Communications, 10(6), 772–776. https://doi.org/10.1016/j.catcom.2008.11.035
Kuhn, M., & Napporn, T. W. (2010). Single-Chamber Solid Oxide Fuel Cell Technology – From its origins to today’s state of the art. Energies, 3(1), 57–134. https://doi.org/10.3390/en30x000x
Leng, Y., Chan, S. H., & Liu, Q. (2008). Development of LSCF-GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte. International Journal of Hydrogen Energy, 33(14), 3808–3817. https://doi.org/10.1016/j.ijhydene.2008.04.034
Liu, M., & Lü, Z. (2013). Effect of stack configurations on single chamber solid oxide fuel cell, anode-cathode, anode-anode, and cathode-cathode configuration. Electrochimica Acta, 104, 64–68. https://doi.org/10.1016/j.electacta.2013.04.092
Liu, R. R., Kim, S. H., Taniguchi, S., Oshima, T., Shiratori, Y., Ito, K., & Sasaki, K. (2011). Influence of water vapor on long-term performance and accelerated degradation of solid oxide fuel cell cathodes. Journal of Power Sources, 196(17), 7090–7096. https://doi.org/10.1016/j.jpowsour.2010.08.014
Maryland Tape Casting Ltd, ABD. (2017). http://www.marylandtapecasting.com/
Meunier, M. (2016). Performance and ageing of an anode-supported SOFC operated in single-chamber conditions. Journal of Power Sources, 153(1), 108–113. https://doi.org/10.1016/j.jpowsour.2005.03.138
Morel, B., Roberge, R., Savoie, S., Napporn, T. W., & Meunier, M. (2007). An experimental evaluation of the temperature gradient in solid oxide fuel cells. Electrochemical and solid-state letters, 10(2), 2006–2008. https://doi.org/10.1149/1.2398729
Nagao, M., Yano, M., Okamoto, K., Tomita, A., Uchiyama, Y., Uchiyama, N., & Hibino, T. (2008). A single-chamber SOFC stack: Energy recovery from engine exhaust. Fuel Cells, 8(5), 322–329. https://doi.org/10.1002/fuce.200800017
Riess, I. (2008). On the single chamber solid oxide fuel cells. Journal of Power Sources, 175(1), 325–337. https://doi.org/10.1016/j.jpowsour.2007.09.041
Sayan, Y., Venkatesan, V., Guk, E., Wu, H., & Kim, J. S. (2018). Single-step fabrication of an anode supported planar single-chamber solid oxide fuel cell. International Journal of Applied Ceramic Technology, 15(6), 1375–1387. https://doi.org/10.1111/ijac.13012
Shimada, H., Suzuki, T., Yamaguchi, T., Sumi, H., Hamamoto, K., & Fujishiro, Y. (2016). Challenge for lowering concentration polarization in solid oxide fuel cells. Journal of Power Sources, 302, 53–60. https://doi.org/10.1016/j.jpowsour.2015.10.024
Shri Prakash, B., Senthil Kumar, S., & Aruna, S. T. (2014). Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: A review. Renewable and Sustainable Energy Reviews, 36, 149–179. https://doi.org/10.1016/j.rser.2014.04.043
Singhal, S. C., & Kendall, K. (2003). High Temperature Solid Oxide Fuel Cells:Fundementals, design and Applications. (S. C. Singhal & K. Kendall, Ed.). Oxford: Elsevier Advanced Technology.
Suzuki, T., Jasinski, P., Petrovsky, V., Anderson, H. U., & Dogan, F. (2004). Anode supported single chamber solid oxide fuel cell in CH4-air mixture. Journal of The Electrochemical Society, 151(9), A1473–A1476. https://doi.org/10.1149/1.1782141
Tian, Y., Lü, Z., Liu, M., Zhu, X., Wei, B., Zhang, Y., … Su, W. (2013). Effect of gas supply method on the performance of the single-chamber SOFC micro-stack and the single cells. Journal of Solid State Electrochemistry, 17(1), 269–275. https://doi.org/10.1007/s10008-012-1865-6
Tomita, A., Namekata, Y., Nagao, M., & Hibino, T. (2007). Room-temperature hydrogen sensors based on an In3+-Doped SnP2O7 Proton Conductor. Journal of the Electrochemical Society, 154(5), 172–176. https://doi.org/10.1149/1.2713702
Van Rij, L. N., Le, J., Van Landschoot, R. ., & Schoonman, J. (2001). A novel Ni-CERMET electrode based on a proton conducting electrolyte. Journal of materials science, 6, 1069–1076.
Viricelle, J.-P., Udroiu, S., Gadacz, G., Pijolat, M., & Pijolat, C. (2010). Development of single chamber solid oxide fuel cells (SCFC). Fuel Cells, 10(4), 683–692. https://doi.org/10.1002/fuce.200900146
Wang, S., Kobayashi, T., Dokiya, M., & Hashimoto, T. (2000). Electrical and ionic conductivity of Gd-doped ceria. Journal of The Electrochemical Society, 147(10), 3606–3609.
Yang, Z., Guo, M., Wang, N., Ma, C., Wang, J., & Han, M. (2017). A short review of cathode poisoning and corrosion in solid oxide fuel cell. International Journal of Hydrogen Energy, 42(39), 24948–24959. https://doi.org/10.1016/j.ijhydene.2017.08.057
Yano, M., Tomita, A., Sano, M., & Hibino, T. (2007). Recent advances in single-chamber solid oxide fuel cells: A review. Solid State Ionics, 177(39–40), 3351–3359. https://doi.org/10.1016/j.ssi.2006.10.014
Yin, J.-W., Zhang, C., Yin, Y.-M., Shi, H., Lin, Y., Lu, J., & Ma, Z.-F. (2015). Anode-supported single-chamber solid oxide fuel cell based on cobalt-free composite cathode of Nd0.5Sr0.5Fe0.8Cu0.2O3−δ–Sm0.2Ce0.8O1.9 at intermediate temperatures. Journal of Power Sources, 286, 217–223. https://doi.org/10.1016/j.jpowsour.2015.03.173
Zhang, C., Lin, Y., Ran, R., & Shao, Z. (2010). Improving single-chamber performance of an anode-supported SOFC by impregnating anode with active nickel catalyst. International Journal of Hydrogen Energy, 35(15), 8171–8176. https://doi.org/10.1016/j.ijhydene.2009.12.164 Zhao, T. S., & Ni, M. (2013). Solid Oxide Fuel Cell:From Materials to System Modelling. (T. S. Zhao & M. Ni, Ed.) (The Royal). Cambridge: The Royal Society of Chemistry. https://doi.org/10.1039/9781849737777
Zhao, Z., Liu, L., Zhang, X., Wu, W., Tu, B., Cui, D., … Cheng, M. (2013). High and low temperature behaviors of La0.6Sr0.4Co0.2Fe0.8O3-δ cathode operating under CO2/H2O-containing atmosphere. International Journal of Hydrogen Energy, 38(35), 15361–15370. https://doi.org/10.1016/j.ijhydene.2013.09.089
Zhu, X., Lü, Z., Wei, B., Zhang, Y., Huang, X., & Su, W. (2010). Fabrication and evaluation of a Ni/La0.75Sr0.25Cr0.5Fe0.5O3−δ co-impregnated yttria-stabilized zirconia anode for single-chamber solid oxide fuel cells. International Journal of Hydrogen Energy, 35(13), 6897–6904. https://doi.org/10.1016/j.ijhydene.2010.04.028

Details

Primary Language

Turkish

Subjects

Engineering, Mechanical Engineering

Journal Section

Research Article

Authors

Yunus Sayan ^*
0000-0002-0871-6842
Türkiye

Jung-sik Kim
0000-0002-3696-7251
United Kingdom

Houzheng Wu
0000-0002-7628-3890
United Kingdom

Publication Date

January 31, 2023

Submission Date

November 16, 2022

Acceptance Date

January 10, 2023

Published in Issue

Year 2023 Volume: 15 Number: 1

IZ

https://izlik.org/JA53KU95FD

APA

Sayan, Y., Kim, J.- sik, & Wu, H. (2023). Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı. International Journal of Engineering Research and Development, 15(1), 195-211. https://izlik.org/JA53KU95FD

AMA

1.Sayan Y, Kim J sik, Wu H. Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı. IJERAD. 2023;15(1):195-211. https://izlik.org/JA53KU95FD

Chicago

Sayan, Yunus, Jung-sik Kim, and Houzheng Wu. 2023. “Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı”. International Journal of Engineering Research and Development 15 (1): 195-211. https://izlik.org/JA53KU95FD.

EndNote

Sayan Y, Kim J- sik, Wu H (January 1, 2023) Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı. International Journal of Engineering Research and Development 15 1 195–211.

IEEE

[1]Y. Sayan, J.- sik Kim, and H. Wu, “Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı”, IJERAD, vol. 15, no. 1, pp. 195–211, Jan. 2023, [Online]. Available: https://izlik.org/JA53KU95FD

ISNAD

Sayan, Yunus - Kim, Jung-sik - Wu, Houzheng. “Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı”. International Journal of Engineering Research and Development 15/1 (January 1, 2023): 195-211. https://izlik.org/JA53KU95FD.

JAMA

1.Sayan Y, Kim J- sik, Wu H. Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı. IJERAD. 2023;15:195–211.

MLA

Sayan, Yunus, et al. “Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı”. International Journal of Engineering Research and Development, vol. 15, no. 1, Jan. 2023, pp. 195-11, https://izlik.org/JA53KU95FD.

Vancouver

1.Yunus Sayan, Jung-sik Kim, Houzheng Wu. Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı. IJERAD [Internet]. 2023 Jan. 1;15(1):195-211. Available from: https://izlik.org/JA53KU95FD

Kırıkkale University, Faculty of Engineering and Natural Science, 71450 Yahşihan / Kırıkkale, Türkiye.

ijerad@kku.edu.tr

Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı

Performance of Anode Supported Single Chamber Solid Oxide Fuel Cells Produced in Various Thicknesses by Single-step Co-sintering

Abstract

Keywords

Tek Aşamalı Ortak Sinterleme Yapılarak Çeşitli Kalınlıklarda Üretilen Tek Odacıklı Anot Destekli Katı Oksit Yakıt Pillerinin Performansı

Abstract

Keywords

Supporting Institution

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

IZ

Cite