İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması

Kemal Uray; Mustafa Koçer; Esra Uray; Hicran Açıkel

doi:10.29137/umagd.1239742

TR EN

İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması

Abstract

Küresel ısınma, dünya üzerindeki tüm canlıları etkileyen en önemli çevre sorunlarından biridir. Karbondioksit (CO2) gibi sera gazlarının atmosfere salınması küresel ısınmada önemli rol oynamaktadır. Dünya çapında yapıların inşası için her yıl büyük miktarda çimento üretilmektedir. Çimento üretiminden kaynaklı olarak atmosferde önemli ölçüde (%15-24) CO2 gazı oluşmaktadır. Bu nedenle çimento yerine daha çevreci, sürdürülebilir malzemelerin belirli oranlarda kullanılması çevresel sürdürülebilirlik açısından önemlidir. İnşaat mühendisliği alanında özellikle beton üretimi ve zemin iyileştirmede yoğun bir şekilde kullanılan çimento yerine bu malzemelerin ikame edilmesi durumunda, sürdürülebilir malzemeler de dayanım ve durabilite özelliklerini olumlu yönde etkilemelidir. İnşaat mühendisliğinde, deneysel ve analitik çalışmalarda birçok parametre etkili olabilmektedir. Uçucu kül, silis dumanı ve öğütülmüş yüksek fırın cürufu gibi malzemeler kullanarak sürdürülebilir geopolimer betonların üretiminde optimum mineral katkı miktarını belirlemek veya bu parametrelerin istenilen beton özelliklerine etkisini araştırmak için birçok deney yapılması gerekmektedir. Diğer yandan birçok parametrenin etkili olduğu analitik çalışmalarda ise çok sayıda analize ihtiyaç duyulmaktadır. Japon bilim insanı Dr. Genichi Taguchi tarafından geliştirilen ve kalite iyileştirmede kullanılan yöntem sayesinde birçok parametrenin ve bu parametre seviyelerinin hedeflenen tasarım üzerindeki etkisi güvenilir bir şekilde belirlenebilmekte ve parametre optimizasyonu sağlam bir şekilde yapılabilmektedir. Yöntem sayesinde zamandan, iş gücünden, maliyetten ve enerjiden tasarruf sağlanarak güvenilir sonuçlar elde edilmektedir.

Keywords

Beton tasarımı, Geoteknik tasarım, Analitik Tasarım, Deney Tasarımı, Optimizasyon, Taguchi Yöntemi

Investigation of Usability of Taguchi Method in Civil Engineering Experimental and Analytical Designs

Abstract

Global warming is one of the most critical environmental problems affecting all living things. The release of greenhouse gases such as carbon dioxide (CO2) into the atmosphere plays an important role in global warming. A large amount of cement is produced each year to construct structures worldwide. A significant amount (15-24%) of CO2 gas is formed in the atmosphere due to cement production. For this reason, environmental sustainability needs to use more environmentally friendly, sustainable materials in certain proportions instead of cement. These materials, which will be used instead of cement, which are used extensively in the field of civil engineering, especially in concrete production and soil improvement works, should also positively affect the strength and durability properties of these materials. Sustain materials should also positively affect the strength and durability properties in case of substituting these materials instead of cement which is intensively utilized in the field of civil engineering, especially in concrete production and soil improvement. Many parameters can be effective in civil engineering, experimental, and analytical studies. Many experiments are required to determine the optimum amount of mineral additives in the production of sustainable geopolymer concretes employing materials such as fly ash, silica fume, and ground blast furnace slag or to investigate the effect of these parameters on the desired concrete properties. On the other hand, many analyzes are needed in analytical studies where many parameters are effective. Thanks to the method developed by Genichi Taguchi and used in quality improvement, the effect of many parameters and these parameter levels on the targeted design can be determined reliably and parameter optimization can be conducted robustly. Thanks to the method, reliable results are obtained by saving time, labor, cost, and energy.

Keywords

Concrete Design, Geotechnical Design, Analytical Design, Design of Experiment, Optimization, Taguchi Method

References

Adisa Olonade, K., Fitriani, H., & Toluwalase Kola, O. (2017). Regression models for compressive strength of concrete under different curing conditions. MATEC Web of Conferences, 101, 05013. https://doi.org/10.1051/MATECCONF/201710105013
Aksu, B., 2019, Kalite Geliştirmede Shainin ve Taguchi Uygulamaları, Detay Yayıncılık.
Alighardashi, A., Mehrani, M. J., Fakhravar, N., & Ramezanianpour, A. M. (2019). Material design and characterization of pervious concrete reactive barrier containing nano-silica and fine pumice aggregate. Asian Journal of Civil Engineering, 20(1), 49–56. https://doi.org/10.1007/S42107-018-0087-3/TABLES/8
Amer, I., Kohail, M., El-Feky, M. S., Rashad, A., & Khalaf, M. A. (2021). Characterization of alkali-activated hybrid slag/cement concrete. Ain Shams Engineering Journal, 12(1), 135–144. https://doi.org/10.1016/J.ASEJ.2020.08.003
Bowden, G. D., Pichler, B. J., & Maurer, A. (2019). A Design of Experiments (DoE) Approach Accelerates the Optimization of CopperMediated 18F-Fluorination Reactions of Arylstannanes. Scientific Reports 2019 9:1, 9(1), 1–10. https://doi.org/10.1038/s41598-019- 47846-6
Chithra, S., Kumar, S. R. R. S., Chinnaraju, K., & Alfin Ashmita, F. (2016). A comparative study on the compressive strength prediction models for High Performance Concrete containing nano silica and copper slag using regression analysis and Artificial Neural Networks. Construction and Building Materials, 114, 528–535. https://doi.org/10.1016/J.CONBUILDMAT.2016.03.214
Chong, B. W., Othman, R., Jaya, R. P., Hasan, M. R. M., Sandu, A. V., Nabiałek, M., Jeż, B., Pietrusiewicz, P., Kwiatkowski, D., Postawa, P., & Abdullah, M. M. A. B. (2021). Design of Experiment on Concrete Mechanical Properties Prediction: A Critical Review. Materials 2021, Vol. 14, Page 1866, 14(8), 1866. https://doi.org/10.3390/MA14081866
Cimbala, J. M. (2014). Taguchi Orthogonal Arrays.
Dave, S. V., Bhogayata, A., & Arora, N. K. (2021). Mix design optimization for fresh, strength and durability properties of ambient cured alkali activated composite by Taguchi method. Construction and Building Materials, 284, 122822. https://doi.org/10.1016/J.CONBUILDMAT.2021.122822
De Side, G. N., Kencanawati, N. N., & Hariyadi. (2020). An application of Taguchi experiment design methods on optimization of mortar mixture composition with Silica Fume as a partial substitute for cement. IOP Conference Series: Earth and Environmental Science, 413(1), 012012. https://doi.org/10.1088/1755-1315/413/1/012012

Dejaegher, B., & Vander Heyden, Y. (2011). Experimental designs and their recent advances in set-up, data interpretation, and analytical applications. Journal of Pharmaceutical and Biomedical Analysis, 56(2), 141–158. https://doi.org/10.1016/J.JPBA.2011.04.023
Erkan, İ. H. (2013). Jet grout kolonların performansını etkileyen faktörlerin deneysel olarak araştırılması. Doktora Tezi. Konya Teknik Üniversitesi, Lisansüstü Eğitim Enstitüsü, İnşaat Mühendisliği Ana Bilim Dalı.
F. M. Zain, M., M. Abd, S., F. M. Zain, M., & M. Abd, S. (2009). Multiple Regression Model for Compressive Strength Prediction of High Performance Concrete. JApSc, 9(1), 155–160. https://doi.org/10.3923/JAS.2009.155.160
Gao, L., Adesina, A., & Das, S. (2021). Properties of eco-friendly basalt fibre reinforced concrete designed by Taguchi method. Construction and Building Materials, 302, 124161. https://doi.org/10.1016/J.CONBUILDMAT.2021.124161
Hinislioǧlu, S., & Bayrak, O. Ü. (2004). Optimization of early flexural strength of pavement concrete with silica fume and fly ash by the Taguchi method. Civil Engineering and Environmental Systems, 21(2), 79–90. https://doi.org/10.1080/10286600410001684562
Jafari, K., Tabatabaeian, M., Joshaghani, A., & Ozbakkaloglu, T. (2018). Optimizing the mixture design of polymer concrete: An experimental investigation. Construction and Building Materials, 167, 185–196. https://doi.org/10.1016/J.CONBUILDMAT.2018.01.191
Jin, R., Chen, Q., & Soboyejo, A. B. O. (2018). Non-linear and mixed regression models in predicting sustainable concrete strength. Construction and Building Materials, 170, 142–152. https://doi.org/10.1016/J.CONBUILDMAT.2018.03.063
Karthik, S., Saravana, K., Mohan, R., & Ledesma, F. (2021). A Taguchi Approach for Optimizing Design Mixture of Geopolymer Concrete Incorporating Fly Ash, Ground Granulated Blast Furnace Slag and Silica Fume. Crystals 2021, Vol. 11, Page 1279, 11(11), 1279. https://doi.org/10.3390/CRYST11111279
Kate, G. K., Nayak, C. B., & Thakare, S. B. (2021). Optimization of sustainable high-strength–high-volume fly ash concrete with and without steel fiber using Taguchi method and multi-regression analysis. Innovative Infrastructure Solutions, 6(2), 1–18. https://doi.org/10.1007/S41062-021-00472-6/TABLES/24
Kocáb, D., Misák, P., & Cikrle, P. (2019). Characteristic Curve and Its Use in Determining the Compressive Strength of Concrete by the Rebound Hammer Test. Materials 2019, Vol. 12, Page 2705, 12(17), 2705. https://doi.org/10.3390/MA12172705
Lee, S., & Shin, S. (2019). Prediction on Compressive and Split Tensile Strengths of GGBFS/FA Based GPC. Materials 2019, Vol. 12, Page 4198, 12(24), 4198. https://doi.org/10.3390/MA12244198
Olivia, M., & Nikraz, H. (2012). Properties of fly ash geopolymer concrete designed by Taguchi method. Materials & Design (1980- 2015), 36, 191–198. https://doi.org/10.1016/J.MATDES.2011.10.036
Raj, S. R., Arulraj, P. G., Anand, N., Balamurali, K., & Gokul, G. (2021). Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method. International Journal of Engineering, 34(10), 2351–2359. https://doi.org/10.5829/IJE.2021.34.10A.16
Ramana, N. V., Harathi, R., Narasimha Babu, S., & Vinay Babu, S. (2013). Regression Models to Evaluate Compressive Strength of Polyethylene Terephthalate (PET) Fibre Reinforced Recycle Aggregate Concrete. International Journal of Engineering Research, 8(5), 11–16. www.ijerd.com
Ramasamy, N. G., Lakshmipathy, M., & Kannan Rajkumar, P. R. (2020). Optimization and Experimental investigation of HighPerformance concrete. IOP Conference Series: Materials Science and Engineering, 912(6), 062051. https://doi.org/10.1088/1757- 899X/912/6/062051
Ross, P. J. (1988). Taguchi techniques for quality engineering: loss function, orthogonal experiments, parameter and tolerance design.
Roy, R. K. (2010). A Primer on the Taguchi Method. https://doi.org/10.13140/RG.2.2.21506.84163
Sabarish, K. V., & Paul, P. (2020). Optimizing the concrete materials by L9 orthogonal array. Materials Today: Proceedings, 22, 460– 464. https://doi.org/10.1016/J.MATPR.2019.07.720
Sahoo, S., Das, B. B., & Mustakim, S. (2016). Acid, Alkali, and Chloride Resistance of Concrete Composed of Low Carbonated Fly Ash. Journal of Materials in Civil Engineering, 29(3), 04016242. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001759
Serencam, H., & Uçurum, M. (2019). Taguchi Deney Tasarımı Kullanılarak Uçucu Kül İle Ni (II) Gideriminde Bazı Adsorpsiyon Parametrelerinin Etkinliğinin İrdelenmesi. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 8(1), 336–344. https://doi.org/10.28948/NGUMUH.517135
Sevinç, A. H., Durgun, M. Y., & Eken, M. (2017). A Taguchi approach for investigating the engineering properties of concretes incorporating barite, colemanite, basaltic pumice and ground blast furnace slag. Construction and Building Materials, 135, 343–351. https://doi.org/10.1016/J.CONBUILDMAT.2016.12.209
Sharifi, E., Sadjadi, S. J., Aliha, M. R. M., & Moniri, A. (2020). Optimization of high-strength self-consolidating concrete mix design using an improved Taguchi optimization method. Construction and Building Materials, 236, 117547. https://doi.org/10.1016/J.CONBUILDMAT.2019.117547
Taguchi, G., Elsayed, E. A., & Hsiang, T. C. (1989). Quality engineering in production systems. McGraw-Hill College.
Taguchi, G., & Phadke, M. S. (1986). Quantity Engineering Through Design Optimization. Proceedings of the National Electronics Conference, 40(pt 1), 32–39. https://doi.org/10.1007/978-1-4684-1472-1_5
Tan, O. (2006). Investigation of soil parameters affecting the stability of homogeneous slopes using the Taguchi method. Eurasian Soil Science, 39(11), 1248–1254. https://doi.org/10.1134/S1064229306110135
Tan, O., Gungormus, G., & Zaimoglu, A. S. (2014). Effect of Bentonite, Fly Ash and Silica Fume cement injections on uniaxial compressive strength of granular bases. KSCE Journal of Civil Engineering, 18(6), 1650–1654. https://doi.org/10.1007/S12205-014- 0227-6/METRICS
Tanco, M., Viles, E., Ilzarbe, L., & Alvarez, M. J. (2008). Is design of experiments really used? A survey of Basque industries. http://dx.doi.org/10.1080/09544820701749124, 19(5), 447–460. https://doi.org/10.1080/09544820701749124
Tang, C. W., Cheng, C. K., & Ean, L. W. (2022). Mix Design and Engineering Properties of Fiber-Reinforced Pervious Concrete Using Lightweight Aggregates. Applied Sciences 2022, Vol. 12, Page 524, 12(1), 524. https://doi.org/10.3390/APP12010524
Tanyildizi, H. (2021). Investigation of mechanical properties of polymer impregnated concrete containing polypropylene fiber by taguchi and anova methods. Revista de la construcción, 20(1), 52–61. https://doi.org/10.7764/RDLC.20.1.52
Thawing Durability of a Fine-Grained Soil. International Journal of Civil and Environmental Engineering, 9(8), 1116–1120. https://doi.org/10.5281/ZENODO.1110309
Uray, E., Carbas, S., Geem, Z. W., & Kim, S. (2022). Parameters Optimization of Taguchi Method Integrated Hybrid Harmony Search Algorithm for Engineering Design Problems. Mathematics 2022, Vol. 10, Page 327, 10(3), 327. https://doi.org/10.3390/MATH10030327
Uray, E., Tan, O., Carbas, S., & Erkan, I. H. (2021). Metaheuristics-based Pre-Design Guide for Cantilever Retaining Walls. Teknik Dergi, 32(4). https://doi.org/10.18400/tekderg.561956
Uysal, M. (2012). Taguchi and Anova approach for optimisation of design parameters on the compressive strength of HSC. Magazine of Concrete Research, 64(8), 727–735. https://doi.org/10.1680/MACR.11.00156
Uysal, M., Akyuncu, V., Tanyildizi, H., Sumer, M., & Yildirim, H. (2019). Optimization of durability properties of concrete containing fly ash using Taguchi’s approach and Anova analysis. Revista de la Construccion, 17(3), 364–382. https://doi.org/10.7764/RDLC.17.3.364
Warda, M. A., Khalil, H. S., Ahmad, S. S. E., & Mahdi, I. M. (2020). Optimum Sustainable Mix Proportions of High Strength Concrete by Using Taguchi Method. Frattura ed Integrità Strutturale, 14(54), 211–225. https://doi.org/10.3221/IGF-ESIS.54.16
WOS-1. (2023). Web of Science. https://www.webofscience.com/wos/woscc/summary/24c4417b-991a-4b1a a632-f9fe2b81c565- 571adfc7/relevance/1
WOS-2. (2023). Web of Science. https://www.webofscience.com/wos/woscc/summary/5873ee75-bca9-49b0 8ace-aa049a92b8c2- 5729300f/relevance/1
WOS-3. (2023). Web of Science. https://www.webofscience.com/wos/woscc/summary/42b3a50d-ee06-4c9d 8f26-8ea425b5fe75- 572b595e/relevance/1
WOS-4. (2023). Web of Science. https://www.webofscience.com/wos/woscc/summary/a120a56e-59fe-4a35 ba37-86c9deb3e337- 74dfdf5b/relevance/1(overlay:export/ext)
Wu, S. S., Li, B. Z., Yang, J. G., & Shukla, S. K. (2010). Predictive modeling of high-performance concrete with regression analysis. IEEM2010 - IEEE International Conference on Industrial Engineering and Engineering Management, 1009–1013. https://doi.org/10.1109/IEEM.2010.5674229
Yeh, I. C. (1998). Modeling of strength of high-performance concrete using artificial neural networks. Cement and Concrete Research, 28(12), 1797–1808. https://doi.org/10.1016/S0008-8846(98)00165-3
Yenginar, Y. (2020). Derin karıştırma kolonlarının performansını etkileyen faktörlerin model deneylerle araştırılması. Doktora Tezi. Konya Teknik Üniversitesi, Lisansüstü Eğitim Enstitüsü, İnşaat Mühendisliği Ana Bilim Dalı. Science and Humanity. https://www.researchgate.net/publication/259589822
Zaimoğlu, A. Ş. (2015). The Effect of Randomly Distributed Polypropylene Fibers Borogypsum Fly Ash and Cement on Freezing- Yenginar, Y., Mobark, A. A. a. m., & Olgun, M. (2021). Investigating the construction parameters of deep mixing columns in silty soils. International Advanced Researches and Engineering Journal, 5(3), 464–474. https://doi.org/10.35860/IAREJ.978978 Zahraee, S. M., Memari, A. ;, Rezaei, G. ;, Afshar, J. ;, & Rohani, J. B. M. (2013). Teaching the Design of Experiment and Response Surface Methodology Using Paper Helicopter Experiment. Paper presented at 4th International Graduate conference on Engineering.

Details

Primary Language

Turkish

Subjects

Civil Engineering

Journal Section

Review

Authors

Kemal Uray ^*
0000-0003-1973-7865
Türkiye

Mustafa Koçer
0000-0002-5505-2065
Türkiye

Esra Uray
0000-0002-1121-2880
Türkiye

Hicran Açıkel
0000-0002-2027-7723
Türkiye

Early Pub Date

July 7, 2023

Publication Date

July 14, 2023

Submission Date

January 20, 2023

Acceptance Date

March 5, 2023

Published in Issue

Year 2023 Volume: 15 Number: 2

DOI

https://doi.org/10.29137/umagd.1239742

IZ

https://izlik.org/JA36DZ53PZ

APA

Uray, K., Koçer, M., Uray, E., & Açıkel, H. (2023). İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması. International Journal of Engineering Research and Development, 15(2), 429-445. https://doi.org/10.29137/umagd.1239742

AMA

1.Uray K, Koçer M, Uray E, Açıkel H. İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması. IJERAD. 2023;15(2):429-445. doi:10.29137/umagd.1239742

Chicago

Uray, Kemal, Mustafa Koçer, Esra Uray, and Hicran Açıkel. 2023. “İnşaat Mühendisliği Deneysel Ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması”. International Journal of Engineering Research and Development 15 (2): 429-45. https://doi.org/10.29137/umagd.1239742.

EndNote

Uray K, Koçer M, Uray E, Açıkel H (July 1, 2023) İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması. International Journal of Engineering Research and Development 15 2 429–445.

IEEE

[1]K. Uray, M. Koçer, E. Uray, and H. Açıkel, “İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması”, IJERAD, vol. 15, no. 2, pp. 429–445, July 2023, doi: 10.29137/umagd.1239742.

ISNAD

Uray, Kemal - Koçer, Mustafa - Uray, Esra - Açıkel, Hicran. “İnşaat Mühendisliği Deneysel Ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması”. International Journal of Engineering Research and Development 15/2 (July 1, 2023): 429-445. https://doi.org/10.29137/umagd.1239742.

JAMA

1.Uray K, Koçer M, Uray E, Açıkel H. İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması. IJERAD. 2023;15:429–445.

MLA

Uray, Kemal, et al. “İnşaat Mühendisliği Deneysel Ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması”. International Journal of Engineering Research and Development, vol. 15, no. 2, July 2023, pp. 429-45, doi:10.29137/umagd.1239742.

Vancouver

1.Kemal Uray, Mustafa Koçer, Esra Uray, Hicran Açıkel. İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması. IJERAD. 2023 Jul. 1;15(2):429-45. doi:10.29137/umagd.1239742

Kırıkkale University, Faculty of Engineering and Natural Science, 71450 Yahşihan / Kırıkkale, Türkiye.

ijerad@kku.edu.tr

İnşaat Mühendisliği Deneysel ve Analitik Tasarımlarında Taguchi Yönteminin Kullanılabilirliğinin Araştırılması

Abstract

Keywords

Investigation of Usability of Taguchi Method in Civil Engineering Experimental and Analytical Designs

Abstract

Keywords

References

Details

Primary Language

Subjects

Journal Section

Authors

Early Pub Date

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite