Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance

Burcu Didem Çorbacıoğlu

doi:10.29137/umagd.398895

EN

Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance

Abstract

In this study, the chemical plating parameters for Ni-P-acetylacetonate-TiO₂ composite particles and the corrosion resistances of the deposition layer obtained by electroless plating are investigated. The effects of the TiO₂ concentration, process time, temperature, and pH of the plating materials are examined, and optimal parameters are determined. The corrosion resistance of samples obtained by Ni-P-acetylacetonate-TiO₂ composite plating is assessed by comparison to a Ni plating layer, and it is found to be superior to that of Ni-P plating layers in a 3.5% NaCl salt spray, as well as in 15% H₂SO₄ and 20% HCl solutions. The origin of this corrosion resistance in composite plating layers is discussed.

Keywords

chemical plating,composite material,deposition rate,corrosion resistance,Ni plating

References

Balaraju, J. N., Narayanan, T. S., & Seshadri, S. (2001): Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coatings by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5, 334–338. doi:10.1007/s100080000159
Balaraju, J. N., Narayanan, T. S., & Seshadri, S. K. (2003): Electroless Ni–P composite coatings. Journal of Applied Electrochemistry, 33, 807–816. doi:10.1023/A:1025572410205
Chen, W., Gao, W., & He, Y. (2010): A novel electroless plating of Ni–P–TiO2 nano-composite coatings. Surface and Coatings Technology, 204, 2493–2498. doi:10.1016/j.surfcoat.2010.01.032
Farzaneh, A., Ehteshamzadeh, M., & Cobley, A. J. (2017): Modelling of surfactants and chemistry for electroless Ni-P plating. Surface Engineering, in press. 1–8. doi:10.1080/02670844.2017.1287621
Gawad, S. A., Baraka, A. M., Morsi, M. S., & Eltoum, M. A. (2013): Development of electroless Ni–P–Al2O3 and Ni–P–TiO2 composite coatings from alkaline hypophosphite gluconate baths and their properties. International Journal of Electrochemical Science, 8, 1722–1734.
Gezerman A. O. & Çorbacıoglu, B. D. (2013): Iron (II) acetylacetonate containing brightener and sulphur containing carrier in nickel plating. Surface Engineering, 29, 516–521. doi:10.1179/1743294413Y.0000000154
Han, C., Shao, Q., Lei, J., Zhu, Y. & Ge, S. (2017): Preparation of NiO/TiO2 pn heterojunction composites and its photocathodic protection properties for 304 stainless steel under simulated solar light. Journal of Alloys and Compounds, 703, 530–537. doi:10.1016/j.jallcom.2017.01.349
Hoye, R. & Gao, W. (2012): Oxidation behaviour of Ni-Cr-Y2O3 composite coatings synthesised by sol enhanced pulse electroplating. Journal of Materials Science Research, 1, 133-149. doi:10.5539/jmsr.v1n2p133
Kolev, K., Jadin, A., Benbakoura, S., & Laude, L. D. (1999): Excimer laser-induced modification in PMMA/Ni-acetylacetonate films for selective metallization. Applied Surface Science, 138, 434–438. doi:10.1016/S0169-4332(98)00437-1
Kumar, S., Pande, S., & Verma, P. (2015): Adhesion failure behavior of Ni-TiO2-Al2O3 & Ni-Al2O3 composite layers coatings evaluated using microscratch testing. International Journal of Current Engineering and Technology, 5, 704- 707, 2015.

Promphet, N., Rattanawaleedirojn, P., & Rodthongkum, N. (2017): Electroless NiP-TiO2 sol-RGO: A smart coating for enhanced corrosion resistance and conductivity of steel. Surface and Coatings Technology, 325, 604–610. doi:10.1016/j.surfcoat.2017.07.018
Ru, J., Jia, Y., Jiang, Y., Feng, J., Zhou, R., Hua, Y., & Wang, D. (2017): Modification of ZTA particles with Ni coating by electroless deposition. Surface Engineering , 33, 353–361. doi:10.1080/02670844.2016.1248119
Sahu, G. & Tarr, M. A. (2013): Improved performance of three-dimensional Ni–TiO2 core–shell nanowire photoanodes in dye-sensitized solar cells. MRS Communications, 3, 199–205. doi:10.1557/mrc.2013.42
Soares, M. E., Soares, P., Souza, P. R., Souza, R. M., & Torres, R. D. (2017): The effect of nitriding on adhesion and mechanical properties of electroless Ni–P coating on AISI 4140 steel. Surface Engineering, 33, 116–121. doi:10.1080/02670844.2016.1148831
Suiyuan, C., Ying, S., Hong, F., Jing, L., Changsheng, L., & Kai, S. (2012): Synthesis of Ni-P-PTFE-nano-Al2O3 composite plating coating on 45 steel by electroless plating. Journal of Composite Materials, 46, 1405–1416. doi:10.1177/0021998311420312
Takeda, E., Todoroki, N., Kitamoto, Y., Abe, M., Inoue, M., Fujii, T., & Arai, K. I. (2000): Faraday effect enhancement in Co–ferrite layer incorporated into one-dimensional photonic crystal working as a Fabry–Pérot resonator. Journal of Applied Physics, 87, 6782–6784. doi:10.1063/1.372840
Xu, Y., Zhou, M., Wen, L., Wang, C., Zhao, H., Mi, Y., & Lei, Y. (2015): Highly ordered three-dimensional Ni-TiO2 nanoarrays as sodium ion battery anodes. Chemistry of Materials, 27, 4274–4280. doi:10.1021/acs.chemmater.5b00633
Yongfeng, L., Limin, Z., Zhankui, W., Lijie, M., Jianxiu, S., Chang, L., & MingChao, J. (2017): Ni-P TiO2 nanoparticle composite formed by chemical plating: Deposition rate and corrosion resistance. International Journal of Electrochemical Science, 12, 3385–3397. doi: 10.20964/2017.04.41
Zou, G., Cao, M., Lin, H., Jin, H., Kang, Y., & Chen, Y. (2006): Nickel layer deposition on SiC nanoparticles by simple electroless plating and its dielectric behaviors. Powder Technology, 168, 84–88. doi:10.1016/j.powtec.2006.07.002
Ranganatha, S., Venkatesha, T. V., & Vathsala, K. (2010): Development of electroless Ni–Zn–P/nano-TiO2 composite coatings and their properties. Applied Surface Science, 256, 7377–7383. doi:10.1016/j.apsusc.2010.05.076

Details

Primary Language

English

Subjects

-

Journal Section

Research Article

Authors

Burcu Didem Çorbacıoğlu ^*
Yıldız Teknik Üniversitesi
Türkiye

Publication Date

January 31, 2019

Submission Date

February 26, 2018

Acceptance Date

December 4, 2018

Published in Issue

Year 2019 Volume: 11 Number: 1

DOI

https://doi.org/10.29137/umagd.398895

IZ

https://izlik.org/JA57DA43GM

APA

Çorbacıoğlu, B. D. (2019). Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance. International Journal of Engineering Research and Development, 11(1), 192-199. https://doi.org/10.29137/umagd.398895

AMA

1.Çorbacıoğlu BD. Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance. IJERAD. 2019;11(1):192-199. doi:10.29137/umagd.398895

Chicago

Çorbacıoğlu, Burcu Didem. 2019. “Ni-P-Acetylacetonate-TiO2 Composite Plating With Electroless Plating: Plating Parameters and Corrosion Resistance”. International Journal of Engineering Research and Development 11 (1): 192-99. https://doi.org/10.29137/umagd.398895.

EndNote

Çorbacıoğlu BD (January 1, 2019) Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance. International Journal of Engineering Research and Development 11 1 192–199.

IEEE

[1]B. D. Çorbacıoğlu, “Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance”, IJERAD, vol. 11, no. 1, pp. 192–199, Jan. 2019, doi: 10.29137/umagd.398895.

ISNAD

Çorbacıoğlu, Burcu Didem. “Ni-P-Acetylacetonate-TiO2 Composite Plating With Electroless Plating: Plating Parameters and Corrosion Resistance”. International Journal of Engineering Research and Development 11/1 (January 1, 2019): 192-199. https://doi.org/10.29137/umagd.398895.

JAMA

1.Çorbacıoğlu BD. Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance. IJERAD. 2019;11:192–199.

MLA

Çorbacıoğlu, Burcu Didem. “Ni-P-Acetylacetonate-TiO2 Composite Plating With Electroless Plating: Plating Parameters and Corrosion Resistance”. International Journal of Engineering Research and Development, vol. 11, no. 1, Jan. 2019, pp. 192-9, doi:10.29137/umagd.398895.

Vancouver

1.Burcu Didem Çorbacıoğlu. Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance. IJERAD. 2019 Jan. 1;11(1):192-9. doi:10.29137/umagd.398895

Kırıkkale University, Faculty of Engineering and Natural Science, 71450 Yahşihan / Kırıkkale, Türkiye.

ijerad@kku.edu.tr

Ni-P-Acetylacetonate-TiO2 Composite Plating with Electroless Plating: Plating Parameters and Corrosion Resistance

Abstract

Keywords

Abstract

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite