Design Optimization of Machining Parameters for AWJ Turning Operations of 718 Inconel Super alloy Based on the Taguchi
Abstract
Inconel Alloy 718 super alloy was machined using abrasive water jet (AWJ) in this study. Following the cutting process, average surface roughness (Ra µm) and material removal rate (MRR) were investigated and operating parameters were optimized using Taguchi method. Among the machining parameters were pump pressure (PP) (200, 350 MPa), nozzle feed rate (NFR) (5, 105 and 205 mm/min); abrasive flow rate (AFR) (50, 200 and 350 g/min); spindle speed (SS) (25, 50 and 75 RPM) and standoff distance (SOD) (2, 8 and 14 mm). Taguchi L18 (21 x34) orthogonal factorial experiment organization is adopted as experiment design. The effect of parameters on Ra and depth of cut (DoC) was investigated statistically using the outcomes of the variance analysis and S/N rates. As a result of the empirical studies, PP proved to have the highest effect on Ra by 42.35%. On the other hand, NFR proved to have the highest effect on DoC by 72.85%. Increasing SS has improved Ra value while increasing DoC.
Keywords
Material Removal Rate,Inconel,Taguchi,Surface Roughness and Water Jet Turning
References
- Ansari, A. I., & Hashish, M. (1995). Effect of abrasive waterjet parameters on volume removal trends in turning. Journal of engineering for industry, 117(4), 475-484.
- Ay, M., Çaydaş, U., & Hascalik, A. (2010). Effect of traverse speed on abrasive waterjet machining of age hardened Inconel 718 nickel-based super alloys. Materials and Manufacturing Processes, 25(10), 1160-1165.
- Ay, M., Çaydaş, U., Hasçalık, A., (2013). Optimization of micro EDM drilling of inconel 718 superalloy. The International Journal of Advanced Manufacturing Technology, 66(5-8),1015-1023.
- Bhattacharya, S.K., Javaid, A., Lewis, M.H., Walbank, J. (1983). Wear Mechanisms of Syalon Ceramic Tools when Machining Nickel-Based Materials, Metals Technology, 10: 482-483.
- Bradley, E. (1988) Super alloys A Technical Guide, ASM Internatıonal, USA, 1-29.
- Çaydaş, U., Ay, M., (2016). WEDM cutting of Inconel 718 nickel based superalloy effects of cutting parameters on the cutting quality. Materiali in tehnologije, 50(1),117-125.
- E. Lima, C. E. D. A., Lebrón, R., de Souza, A. J., Ferreira, N. F., & Neis, P. D. (2016). Study of influence of traverse speed and abrasive mass flowrate in abrasive water jet machining of gemstones. The International Journal of Advanced Manufacturing Technology, 83(1-4), 77-87.
- Escobar-Palafox, G. A., R. S. Gault, and K. Ridgway. (2012). Characterization of abrasive water-jet process for pocket milling in Inconel 718. Procedia CIRP 1: 404-408.
- Ezugwu, E. O., Wanga, Z. M., Machadop A. R. (1998). The Machinability of Nickel- Based Alloys: A Review, Journal of materials Processing Technology, Volume 86, Issues 1-3, 1-16.
- Field, M. (1968). Machining Aerospace Alloy, Iron and Steel Institute, Special Report 94, 151-160,.