Derin Maden Sondajlarında Ön İnceleme Aşaması Mühendislik Yaklaşımları ve Fizibilite Etütlerinin Gerçekleştirilmesi
Abstract
Bu çalışmada toz metalurjisi yöntemi ile
üretilen alümina (Al2O3) takviyeli alüminyum esaslı kompozit malzemelerde
mekanik alaşımlama süresinin tuzlu ortamdaki korozyon davranışına etkileri
incelenmiştir. Numunelerin toz metalurjisi yöntemi ile üretiminde, takviye
malzemesi olan Al2O3 tozları ve ana malzeme olan alüminyum tozları
karışımına 1 saat karıştırma veya 2, 4, 6, 10 saat mekanik alaşımlama işlemleri
uygulanmıştır. Presleme ve sinterleme işlemleri sonrasında elde edilen Al2O3 takviyeli alüminyum
esaslı kompozit numunelere tuzlu ortamında (%3,5 NaCl) potansiyodinamik yöntem
ile elektrokimyasal korozyon testleri uygulanmıştır. Çalışma sonucunda, mekanik
alaşımlama süresinin artması ile Al2O3 takviyeli alüminyum
esaslı kompozit malzemenin korozyon dayanımının azaldığı belirlenmiştir.
Keywords
References
- Canoglu, M. C. (2018). Investigation of the Suitability of a Pipe Stock Site in Terms of Geotechnical Characterization and Engineering Design Parameters Considering the Economic Aspects. Hittite Journal of Science and Engineering, 5(2), 147-154.
- Canoglu, M.C. & Gökkurt Baki, O. (2018). Feasibility stage design assessment for transforming an unproductive dam into a sanitary landfill site. Fresenius Environmental Bulletin, 27(12A), 9179-9188.
- Canoglu, M.C. & Kurtuluş, B. (2017a). Determination of the dam axis permeability for the design and the optimization of grout curtain: An example from Orhanlar Dam (Kütahya-Pazarlar). Periodicals of Engineering and Natural Sciences, 5(1), 37-43.
- Canoglu, M.C. ve Kurtuluş, B. (2017b). Permeability of Savcıbey Dam (Bilecik) axis location and design of grout curtain. Bulletin of Mineral Research and Exploration, 154, 157-168.
- Cao, P., Liu, M., Chen, Z., Chen, B. & Zhao, Q. (2018). Theory calculation and testing of air injection parameters in ice core drilling with air reverse circulation. Polar Science, 17, 23-32.
- Kurtuluş, C. & Bozkurt, A. (2010). Geophysical and Drill-hole Investigations for Detecting Groundwater Aquifers Around Başiskele-Kocaeli. Applied Geoscience, 2, 1-9.
- Navarro, J., Segarra, P., SanchidriánJ.A., Castedo, R. & López, L.M. (2019). Assessment of drilling deviations in underground operations. Tunneling and Underground Space Tecnology, 83, 254-261.
- Özbayoğlu, Y. (1979). Elmaslı Sondajlarda Kuyu Sapmaları. Bilimsel Madencilik Dergisi, 18 (2), 33-40.
- Sneddon, A., Mearns, K. & Flin, R. (2013). Stress, fatigue, situation awareness and safety in offshore drilling crews. Safety Science, 56, 80-88.