Ballistic Impact Simulation of Ceramic/Metal Armor Structures

Yıl 2017, Cilt: 9 Sayı: 3, 12 - 20, 26.12.2017

Kemal Arslan Recep Güneş

https://doi.org/10.29137/umagd.371100

Cited By: 3

Öz

The study presents a comparative numerical
investigation on ballistic performance of ceramic/metal armor structures. 2D
axisymmetric numerical model was developed for ballistic impact simulations
using LS-DYNA^® finite element software. The armor structures
included combinations of boron carbide (B₄C), Al6061-T6 and 4340
steel constituents. The interfaces in the armor structure were modelled with an
epoxy resin adhesive. In order to define proper material behavior,
Johnson-Holmquist-Ceramics material model for B₄C and
Plastic-Kinematic material model for Al6061-T6, 4340 steel and epoxy resin was used. The armor structures were subjected to
7.62 mm ogive-nosed steel projectile impact. In the first section, the
influence of back plate material on the ballistic performance of the armor
structure for bi-layers ceramic/metal configuration (ceramic front face and
metal back plate) was investigated for Al6061-T6 and 4340 steel materials under
same thickness and areal density. In the second section, the effect of removing
half thickness of the metal constituent from the back plate and placing on the
front face was investigated for both Al6061-T6 and 4340 steel materials.
Finally, the influence of adhesive thickness on the ballistic performance of
the armor structure was investigated. Perforation response of the armor
structures were examined in terms of residual velocity of the projectile and
damage mechanisms of the armor structure.

Anahtar Kelimeler

Ballistic impact, Finite element analysis, Ceramic/Metal armor, Perforation

Kaynakça

• Arias, A., Zaera, R., López-Puente, J., & Navarro, C. (2003). Numerical modeling of the impact behavior of new particulate-loaded composite materials. Composite Structures, 61, 151-159.
• Cronin, D.S., Bui, K., Kaufmann, C., Mclntosh, G., & Berstad, T. (2003). Implementation and validation of the Johnson-Holmquist ceramic material model in LS-DYNA. 4th European LS-DYNA Users Conference, 22-23 May, Ulm/Germany, 47-59.
• Chi, R., Serjouei, A., Sridhar, I., & Tan, G.E.B. (2013). Ballistic impact on bi-layer alumina/aluminium armor: A semi-analytical approach. International Journal of Impact Engineering, 52, 37-46.
• Flanagan, D.P., & Belytschko, T. (1981). A uniform strain hexahedron and quadrilateral and orthogonal hourglass control. International Journal for Numerical Methods in Engineering, 17, 679-706.
• Fawaz, Z., Zheng, W., & Behdinan, K. (2004). Numerical simulation of normal and oblique ballistic impact on ceramic composite armours. Composite Structures, 63, 387-395.
• Gonçalves, D.P., de Melo, F.C.L., Klein, A.N., & Al-Qureshi, H.A. (2004). Analysis and investigation of ballistic impact on ceramic/metal composite armour. International Journal of Machine Tools & Manufacture, 44, 307-316.
• Huang, C., & Chen, Y. (2016). Design and impact resistant analysis of functionally graded Al2O3–ZrO2 ceramic composite. Materials and Design, 91, 294-305.
• Johnson, G.R., & Holmquist, T.J. (1993). An improved computational model for brittle materials. High-Pressure Science and Technology, 981-984.
• Johnson, G.R., & Holmquist, T.J. (1999). Response of boron carbide subjected to large strains, high strain rates and high pressures. Journal of Applied Physics, 85, 8060-8073.
• Kreig, R.D., & Key, S.W. (1976). Implementation of a time dependent plasticity theory into structural computer programs. Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, eds., J.A. Stricklin and K.J. Saczalski, ASME, New York, 125-137.
• López-Puente, J., Arias, A., Zaera, R., & Navarro, C. (2005). The effect of the thickness of the adhesive layer on the ballistic limit of ceramic/metal armours. An experimental and numerical study. International Journal of Impact Engineering, 32, 321-336.
• Lee, M., & Yoo, Y.H. (2001). Analysis of ceramic/metal armour systems. International Journal of Impact Engineering, 25, 819-829.
• Mahdu, V., Ramanjaneyulu, K., Bhat, T.B., & Gupta, N.K. (2005). An experimental study of penetration resistance of ceramic armour subjected to projectile impact. International Journal of Impact Engineering, 32, 337-350.
• Nechitailo, N.V., & Batra, R.C. (1998). Penetration/Perforation of aluminum, steel and tungsten plates by ceramic rods. Computers & Structures, 66, 571-583.
• Serjouei, A., Chi, R., Zhang, Z., & Sridhar, I. (2015). Experimental validation of BLV model on bi-layer ceramic-metal armor. International Journal of Impact Engineering, 77, 30-41.
• Tang, R.T., & Wen, H.M. (2017). Predicting the perforation of ceramic-faced light armors subjected to projectile impact. International Journal of Impact Engineering, 102, 55-61.
• Tasdemirci, A., Tunusoglu, G., & Guden, M. (2012). The effect of the interlayer on the ballistic performance of ceramic/composite armors: Experimental and numerical study. International Journal of Impact Engineering, 44, 1-9.
• Zaera, R., & Sánchez-Gálvez, V. (1998). Analytical modelling of normal and oblique ballistic impact on ceramic/metal lightweight armours. International Journal of Impact Engineering, 21, 133-148.
• Zaera, R., Sánchez-Sáez, S., Pérez-Castellanos, J.L., & Navarro, C. (2000). Modelling of the adhesive layer in mixed ceramic/metal armours subjected to impact. Composites Part A: Applied Science and Manufacturing, 31, 823-833.