Yıl 2020, Cilt 12 , Sayı 1, Sayfalar 83 - 89 2020-01-31

Sintering and Characterization of SiC Reinforced Ni Powders in Microwave Furnace

Ahmet YONETKEN [1] , Ayhan EROL [2]


SiC reinforced nickel matrix composites, microwave at different temperatures It is produced by sintering in oven. Nickel deposition on SiC powders was achieved by using electroless nickel plating technique.  It is sintered at temperatures between 500°C, 600 °C, 700°C, 800°C and 900°C under Ar atmosphere. XRD, SEM (Scanning Electron Microscope), pressure test and hardness measurements were used to characterize the properties of sintered samples in microwave furnace. The experimental results, maximum compressive strength (σmax) and hardness (HV) were carried out at 800 °C.  Microwave sintering of Ni-coated SiC powders without electric current can be a promising technique for producing ceramic-reinforced nickel composites.
Microwave sintering, Powder metallurgy, Composites, Nickel plating
  • Chatterjee A., Tanmay B., and K. G. Ayappa, (1998) ‘Analysis of Microwave Sintering of Ceramics’ Materials, Interfaces, and Electrochemical Phenomena October 1998 Vol. 44, No. 10
  • Chen Y., Cao M.,, Xu Q., Zhu J., (2**3) ‘Electroless nickel plating on silicon carbide nanoparticles’ Surface and Coatings Technology 172 , 90–94
  • Changhong Dai and Xianpeng Zhang , (1997) “Microwave Synthesis of Ultrafine Silicon Carbide Whiskers” J.Am.Ceram Soc. 80 [5] 1274-1276
  • Horatiu Niciu and others (2007). ‘The SiC-SiO2-Al2O3-Al6Si2O13 Ceramic Composites Microwave Heating’ Ceex 2007 Conference
  • Kidder, T. (1981). The soul of a new machine. Boston, MA: Little, Brown & Company.
  • Mandal S , Seal A, Daluı, S K., Dey, A K., Ghatak S and Mukhopadhyay A K., (2001)‘‘Mechanical characteristics of microwave sintered silicon carbide’ Bull. Mater. Sci., Vol. 24, No. 2, April 2001, pp. 121–124.
  • Somiya, S.; Inomata, Y., Silicon Carbide Ceramics, Ed. Elsevier Applied Science, 1991
  • Sverdel V. V. , Shatov A. V. , Yurchuk N. A. and Bakun O. V. , (1995)‘Finely disperse cemented carbides WC-Ni I. Mechanical properties’, Powder Metallurgy and Metal Ceramics, Volume 33, Numbers 1-2 / January,
  • Zhang Q., Wu1, M., and Z. Wen, (2005) ‘Electroless nickel plating on hollow glass microspheres’ ‘Surface & Coatings Technology’ 192 213– 219
Birincil Dil en
Konular Mühendislik, Ortak Disiplinler
Bölüm Makaleler
Yazarlar

Yazar: Ahmet YONETKEN (Sorumlu Yazar)
Kurum: FACULTY OF ENGINEERING
Ülke: Turkey


Yazar: Ayhan EROL
Ülke: Turkey


Tarihler

Yayımlanma Tarihi : 31 Ocak 2020

APA YONETKEN, A , EROL, A . (2020). Sintering and Characterization of SiC Reinforced Ni Powders in Microwave Furnace. International Journal of Engineering Research and Development , 12 (1) , 83-89 . DOI: 10.29137/umagd.474003