Abstract
Seramik sağlık gereçlerinde kullanılan klozet kapakları büyük çoğunlukta üreformaldehit bazlı hammaddelerden üretilmektedir. Yenilikçi tasarımlar daha fonksiyonel, daha ince kapaklara doğru gitmektedir. Ancak üreformaldehit gerek işlenebilme zorluğu gerekse mukavemetin yeterli olmamasından dolayı günümüz ihtiyaçlarını karşılayacak özelliklerdeki kapak modellerinin tasarım ve üretimine olanak sağlayamaması, farklı özellikleri bir arada barındıran kompozit malzemelere olan talebi günden güne arttırmaktadır. Bu çalışmada üreformaldehit yerine uzun yıllardır otomotiv başta olmak üzere elektrik, inşaat, ev cihazları gibi sektörlerde yaygın kullanılan SMC (Sheet Moulding Compound) yöntemi ile üretilmiş kompozit malzemeler değerlendirilmiştir. İstenen ürün özelliklerini sağlayan uygun SMC kompozisyonlarının belirlenmesi konusunda çalışmalar yapılmıştır. Ayrıca Ansys yazılım programı kullanılarak klozet kapakları için maksimum deformasyon ve gerilme değerleri bulunmuştur. Bu sayede üreformaldehit ile yapılan klozet kapakları ile kıyaslandığında, daha yüksek darbe dayanımı (145 MPa), daha ince ürün kesiti (4 mm) elde edilmiştir.
Supporting Institution
Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
Project Number
3190373
Thanks
Tezkom Kompozit Teknolojileri Sanayi ve Tic. A.Ş Seramik Araştırma Merkezi
References
- Bruderick M, Denton D, Shinedling M, Kiesel M. Applications of carbon fiber SMC for the dodge viper. Proc. Second S.P.E. Automot. Compos. Conf. Exhib. 2002; 1:1–10.
- Feuillade V., Bergeret, A., Quantin, A., Crespy, J., C., Relationships Between the lass Fibre Sizing Composition and the Surface Quality of Shett Mouiding Compounds (SMC) Body Panels: Composites Science and Tecnology, 66 115-127, (2006).
- Green E. G. (2001). Fibre Reinforced Resin Composite Products. US Patent No. 6,242,090 B1.
- Marissen, R., Linsen, J., Variability of thr Flexural Strenght of Sheet Moulding Componds: Composites Science and Technology, 59 2093-2100, (1999).
- Narita M. (1995). Sheet molding compound. US patent No. 5,431,995.
- Oldenbo M., Fernberg S. P., Berglund L. A., Mechanical Behaviour of SMC Composites with Toughening and Low Density Additives: Composites Part A: Applied Science and Manufacturing, 875-885, (2003).
- Pickering, S.J., Recycling Technologies for Thermoset Composite Materials-Currentb Status: Composites, Part A 37 1206-1215, (2006).
- Trauth, A., Weidenmann, K., Continuous- Discontinuous Sheet Moulding Compounds-Effect of Hybridisation on Mechanical Material Properties: Composite Structures, 1087-1098 (2018).
- Tröster, S., Henning, F., Eyerer, P., A New Process Tecnology for Cost Reduction of Large Scale Production of Fiber Reinforced Thermoplastic Components: 15th Annual Technical Conference of the American Society of Composires Collage Station, Texas, USA, 689-698.
- Voorn, B.V., Smith, H.H.G., Sinke, R.J., Klerk B D., Natural Fibre Reinfiorced Sheet Moulding Compound, Composites, Part A 32 1271-1279, (2001).
- Watanabe T., Yasuda M., Fracture Behaviour of Sheet Moulding compounds Part 1. Under Tensile Load: Composites, 13:54 (1982).
Abstract
Toilet seat covers used in ceramic sanitary ware is currently produced from urea formaldehyde-based raw materials. Innovative designs are moving towards more functional; tinner covers. However, the demand for composite materials with different properties is increasing day by day, as urea formaldehyde cannot allow the design and production of cover models that meet today’s needs due to both the difficulty in processing and its insufficient strength. In this study, instead of urea-formaldehyde, composite materials were produced with SMC (Sheet Moulding Compound) method, which has been widely used in sectors such as electricity, construction, and household appliances and especially in automotive many years, were evaluated. Studies have been carried out to determine suitable SMC compositions that provide the desired product properties. In addition, maximum deformation and stress values of toilet seat covers were found in the Ansys software program. In this way, higher impact strength (145 MPa) and thinner product cross-section (4 mm) were obtained when compared to toilet seat covers made with urea-formaldehyde.
Project Number
3190373
References
- Bruderick M, Denton D, Shinedling M, Kiesel M. Applications of carbon fiber SMC for the dodge viper. Proc. Second S.P.E. Automot. Compos. Conf. Exhib. 2002; 1:1–10.
- Feuillade V., Bergeret, A., Quantin, A., Crespy, J., C., Relationships Between the lass Fibre Sizing Composition and the Surface Quality of Shett Mouiding Compounds (SMC) Body Panels: Composites Science and Tecnology, 66 115-127, (2006).
- Green E. G. (2001). Fibre Reinforced Resin Composite Products. US Patent No. 6,242,090 B1.
- Marissen, R., Linsen, J., Variability of thr Flexural Strenght of Sheet Moulding Componds: Composites Science and Technology, 59 2093-2100, (1999).
- Narita M. (1995). Sheet molding compound. US patent No. 5,431,995.
- Oldenbo M., Fernberg S. P., Berglund L. A., Mechanical Behaviour of SMC Composites with Toughening and Low Density Additives: Composites Part A: Applied Science and Manufacturing, 875-885, (2003).
- Pickering, S.J., Recycling Technologies for Thermoset Composite Materials-Currentb Status: Composites, Part A 37 1206-1215, (2006).
- Trauth, A., Weidenmann, K., Continuous- Discontinuous Sheet Moulding Compounds-Effect of Hybridisation on Mechanical Material Properties: Composite Structures, 1087-1098 (2018).
- Tröster, S., Henning, F., Eyerer, P., A New Process Tecnology for Cost Reduction of Large Scale Production of Fiber Reinforced Thermoplastic Components: 15th Annual Technical Conference of the American Society of Composires Collage Station, Texas, USA, 689-698.
- Voorn, B.V., Smith, H.H.G., Sinke, R.J., Klerk B D., Natural Fibre Reinfiorced Sheet Moulding Compound, Composites, Part A 32 1271-1279, (2001).
- Watanabe T., Yasuda M., Fracture Behaviour of Sheet Moulding compounds Part 1. Under Tensile Load: Composites, 13:54 (1982).
Details
| Primary Language | Turkish |
|---|---|
| Subjects | Mechanical Engineering, Materials Engineering (Other) |
| Journal Section | Articles |
| Authors | |
| Project Number | 3190373 |
| Publication Date | July 31, 2022 |
| Submission Date | February 28, 2022 |
| Published in Issue | Year 2022 Volume: 14 Issue: 2 |
All Rights Reserved. Kırıkkale University, Faculty of Engineering and Natural Science.