Bu çalışmada C95200 ve C95300 alüminyum bronzlarının mikroyapı ve korozyon özelliklerinin incelenmesi amaçlanmıştır. C95200 ve C95300 alaşımları alüminyum bronz normlarında döküm olarak üretilmiştir. Üretilen alüminyum bronz ingotlarından mikroyapı ve korozyon numuneleri oluşturulmuştur. Optik mikroskop, SEM ve EDS araştırmaları yapıldı. Alaşımlara 72 saat %3,5 NaCl ortamında daldırma korozyon testi ve potansiyodinamik polarizasyon korozyon testi yapılmıştır. Mikroyapı incelemelerinde siyah bölgeler birincil α yapısını, tane sınırlarındaki beyaz bölgeler ikincil fazı (β) temsil etmektedir. Potansiyodinamik polarizasyon korozyon testinde C95200 alaşımının korozyon direncinin C95300 göre daha fazla olduğu tespit edilmiştir. Bu durum daldırma korozyon testinde de gözlemlenmiştir.
Karabük Üniversitesi (BAP) Bilimsel Araştırma Projeleri
KBÜBAP-21-YL-083
Bu çalışma Proje No: KBÜBAP-21-YL-083 numaralı proje ile Karabük Üniversitesi Bilimsel Araştırma Projeleri Koordinasyon Birimi tarafından desteklenmektedir.
In this study, it was aimed to investigate the microstructure and corrosion properties of C95200 and C95300 aluminium bronzes. C95200 and C95300 alloys are produced as cast in aluminium bronze norms. Microstructure and corrosion samples were formed from the produced aluminium bronze ingots.Optical microscope, SEM and EDS investigations were done. Corrosion test was performed on the alloys in 3,5% NaCl environment for 72 hours. In addition, potentiodynamic polarization corrosion test was performed. In microstructural studies, black areas represent primary α structure, white areas at grain boundaries represent secondary phase (β). In the potentiodynamic polarization corrosion test, it was determined that the corrosion resistance of the C95200 alloy was higher than the C95300. This was also observed in the immersion corrosion test.
KBÜBAP-21-YL-083
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Articles |
Authors | |
Project Number | KBÜBAP-21-YL-083 |
Publication Date | December 31, 2022 |
Submission Date | June 23, 2022 |
Acceptance Date | December 5, 2022 |
Published in Issue | Year 2022 Volume: 9 Issue: 2 |