Modification of Morphological, Structural and Optical Properties of CBD-Based Growth of PbS Films on Glass Substrates by Addition of Saccharin

Yıl 2018, Cilt: 22 Sayı: 1, 134 - 140, 17.03.2018

Yasin Yücel , Ersin Yücel

https://doi.org/10.19113/sdufbed.30879

Cited By: 1

Öz

Saccharin which so-called as benzoic sulfimide is an artificial sweetener. In this paper, nanostructured lead sulfide (PbS) thin films were produced in the presence of additive known as saccharin via chemical bath deposition (CBD). Effect of the saccharin content on the morphological, optical and structural properties of the films has been investigated. Lead sulfide (PbS) films that included additive were prepared at five different concentrations of saccharin (from 0 to 5%). The fabricated samples were characterized by surface roughness, scanning electron microscopy (SEM), X-Ray diffraction and UV-vis spectroscopy. It was found that the presence of saccharin highly affected the optical and structural properties of PbS thin films. According to the X-Ray diffraction results, crystallite size values of the films decreased from 12.88 to 5.25 nm with increasing of saccharin content. UV-vis measurements showed that both the band gap and transmission properties of the films increased as a result of increasing saccharin concentration. Further, Surface roughness measurements exhibited that average surface roughness was diminished with increasing saccharin content. As a result, it has been found that the presence of saccharin in growth solution played a significant mission in adjusting the main physical properties of the samples.

Anahtar Kelimeler

Surface roughness, Lead sulphide; Saccharin; Chemical bath deposition

Kaynakça

• [1] Yücel, E., Yücel, Y. 2015. Optimization of synthesis conditions of PbS thin films grown by chemical bath deposition using response surface methodology. Journal of Alloys and Compounds, 642(2015), 63-69.
• [2] Yücel, E., Yücel, Y. 2017. Fabrication and characterization of Sr-doped PbS thin films grown by CBD. Ceramics International, 43(2017), 407-413.
• [3] Lee, S. M., Yeon, D. H., Chon, S. S., Cho, Y. S. 2016. Effect of double substitutions of Cd and Cu on optical band gap and electrical properties of non-colloidal PbS thin films, Journal of Alloys and Compounds, 685(2016), 129-134.
• [4] Raniero, L., Ferreira, C. L., Cruz, L. R., Pinto, A. L., Alves, R. M. P. 2010. Photoconductivity activation in PbS thin films grown at room temperature by chemical bath deposition. Physica B, 405(2010), 1283-1286.
• [5] Beddek, L., Messaoudi, M., Attaf, N., Aida, M. S., Bougdira, J. 2016. Sulfide precursor concentration and lead source effect on PbS thin films properties. Journal of Alloys and Compounds, 666(2016), 327-333.
• [6] Wang, G. L., Liu, K. L., Shu, J. X., Gu, T. T., Wu, X. M., Dong, Y. M., Li, Z. J. 2015. Glycerol Capped PbS/CdS Core/Shell Nanoparticles at Different Molar Ratio And Its Application In Biosensors: An Optical Properties Study. Biosensors and Bioelectronics, 69(2015), 106-112.
• [7] Zheng, X., Lei, H., Yang, G., Ke, W., Chen, Z., Chen, C., Ma, J., Guo, Q., Yao, F., Zhang, Q., Xu, H., Fang, G. 2017. Enhancing efficiency and stability of perovskite solar cells via a high mobility p-type PbS buffer layer. Nano Energy 38 (2017), 1-11.
• [8] Martucci, A., Fick, J., Leblanc, S. E., Locascio, M., Hache, A. 2004. Optical properties of PbS quantum dot doped sol-gel films. Journal of Non-Crystalline Solids, 345(2004), 639-642.
• [9] Yücel, E., Yücel, Y., Beleli, B. 2015. Process optimization of deposition conditions of PbS thin films grown by successive ionic layer adsorption and reaction (SILAR) method using response surface methodology. Journal of Crystal Growth, 422(2015), 1-7.
• [10] Lallemand, R. F., Ricq, L., Berçot, P., Pagetti, J. 2002. Effects of the structure of organic additives in the electrochemical preparation and characterization of CoFe film. Electrochimica Acta, 47(2002), 4149-4156.
• [11] Lokhande, A. C., Bagi, J. S. 2014. Studies on enhancement of surface mechanical properties of electrodeposited Ni-Co alloy coatings due to saccharin additive. Surface and Coatings Technology, 258(2014), 225-231.
• [12] Kim, S. H., Sohn, H. J., Joo, Y. C., Kim, Y. W., Yim, T. H., Lee, H. Y., Kang, T. 2005. Effect of saccharin addition on the microstructure of electrodeposited Fe-36 wt.% Ni alloy, Surface and Coatings Technology, 199(2005), 43-48.
• [13] Yücel, E., Yücel, Y. 2017. Effect of doping concentration on the structural, morphological and optical properties of Ca-doped PbS thin films grown by CBD. Optik, 142(2017), 82-89.
• [14] Bai, R., Kumar, D., Chaudhary, S., Pandya, D. K. 2017. Highly crystalline p-PbS thin films with tunable optical and hole transport parameters by chemical bath deposition. Acta Materialia, 131(2017), 11-21.
• [15] Verde, M., Peiteado, M., Villegas, M., Ferrari, B., Caballero, A. C. 2013. Soft solution processing of ZnO nanoarrays by combining electrophoretic deposition and hydrothermal growth. Chemical Physics, 140(2013), 75-80.
• [16] Mrazek, J., Spanhel, L., Surynek, M., Potel, M., Matejec, V. 2011. Crystallization properties of RE-doped (RE = Eu, Er, Tm) Zn2TiO4 prepared by the sol-gel method. Journal of Alloys and Compounds, 509(2011), 4018-4024.
• [17] Akl., A. A., Hassanien, A. S. 2015. Microstructure and crystal imperfections of nanosized CdSxSe1-x thermally evaporated thin films. Superlattices and Microstructures, 85(2015), 67-81.
• [18] Thangavel, S., Ganesan, S., Chandramohan, S., Sudhagar, P., Kang, Y. S., Hong, C. H. 2010. Band gap engineering in PbS nanostructured thin films from near-infrared down to visible range by in situ Cd-doping. Journal of Alloys and Compounds, 495 (2010), 234-237.
• [19] You, Q., Cai, H., Hu, Z., Liang, P., Prucnal, S., Zhou, S., Sun, J., Xu, N., Wu, J. 2015. Blue shift in absorption edge and widening of band gap of O by Al doping and Al-N co-doping. Journal of Alloys and Compounds, 644 (2015), 528-53.