Araştırma Makalesi
BibTex RIS Kaynak Göster

Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate

Yıl 2018, Cilt: 21 Sayı: 3, 587 - 589, 01.09.2018
https://doi.org/10.2339/politeknik.399077

Öz

In this study, effect of
melting temperatures of Sn-3Ag (SAC300), Sn-3Ag
-0.5Cu (SAC305) and Sn-0.3Ag-0.7Cu (SAC0307) ternary
Pb-free solder alloys on wettability were investigated. The sessile drop
technique was used in order to evaluate the contact angles of Pb-free solder
alloys on Cu substrate at predetermined temperatures (250, 280 and 310




















). The melting
temperatures of alloys were examined by differential scanning calorimeter (DSC)
that SAC305 Pb-free alloy has lower than those of SAC300 and SAC0307 alloys.
The best wettability was found for SAC305 and this was followed by SAC300 and
SAC0307. The lowest value of contact angle for SAC305 was 41.90


 at 310

 on Cu substrate.

Kaynakça

  • [1] Çağlarırmak, N., Hepçimen, A. Z., "Effect of Heavy Metal Soil Pollution on Food Chain and Human Health", Akademik Gıda, 8(2): 31-35 (2010).
  • [2] Das, S.K., Sharif, A., Chan, Y.C., Wong, N.B., Yung, W.K.C., " Influence of small amount of Al and Cu on the microstructure, microhardness and tensile properties of Sn–9Zn binary eutectic solder alloy", J. Alloys Comp., 481(1-2): 167-172 (2009).
  • [3] Yang M., Ji H., Wang S., Ko Y.H., Lee C. W., Wu J., Li M. "Effects of Ag content on the interfacial reactions between liquid Sn-Ag-Cu solders and Cu substrates during soldering" Journal of Alloys and Compounds, 679:18-25, (2016).
  • [4] Duong, N. B.,Ariga, T., Hussain,L. B. and Ismail, A. B., " Wettability of lead-free solders on gold-plated copper substrates", Materials Transactions, 49(6): 1462-1466 (2008).
  • [5] Yoon, S. W.,Choi,W. K. and Lee, H. M., "Interfacial reaction between Sn-1Bi-5In-9Zn solder and Cu substrate", Scripta Materialia, 40(3): 297–302 (1999).
  • [6] Yuan, Y., Lee, T. R., " Contact Angle and Wetting Properties", Surface Science Techniques, Springer Series in Surface Sciences, 51: 3-34 (2013).
  • [7] Kumar, G., Prabhu, K. N., "Review of non-reactive and reactive wetting of liquids on surfaces", Advances in Colloid and Interface Science, 133(2): 61–89 (2007).
  • [8] Zhang, X.,Yuan, Z., Zhao, H., Zang, L. and LI, J., "Wetting behavior and interfacial characteristic of Sn-Ag-Cu solder alloy on Cu substrate" Chinese Science Bulletin, 55(9): 797-801 (2010).
  • [9] Zhang, X., Matsuura, H.,Tsukihashi, F.and Yuan,Z., " Effect of Addition of Small Amount of Zinc on Microstructural Evolution and Thermal Shock Behavior in Low-Ag Sn¬Ag¬Cu Solder Joints during Thermal Cycling", Material Transactions, 53(5): 926-931 (2012).
  • [10] Omac, F., Ozyurek, D.and Erer, M., "Investigation of the Wetting Properties of Ternary Lead-Free Solder Alloys on Copper Substrate", Acta Physica Polonocia- A, 131(1):165-167 (2017).
  • [11] Erer, A. M., Candan, E., Güven, M. H., Turen, Y., “Measurement and prediction of contact angles of Pb-free SnAg solder alloys on Cu substrate”, Eur. Phys. J. Appl. Phys., 54(1), 1-4, (2011).

Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate

Yıl 2018, Cilt: 21 Sayı: 3, 587 - 589, 01.09.2018
https://doi.org/10.2339/politeknik.399077

Öz

In this study, effect of
melting temperatures of Sn-3Ag (SAC300), Sn-3Ag
-0.5Cu (SAC305) and Sn-0.3Ag-0.7Cu (SAC0307) ternary
Pb-free solder alloys on wettability were investigated. The sessile drop
technique was used in order to evaluate the contact angles of Pb-free solder
alloys on Cu substrate at predetermined temperatures (250, 280 and 310




















). The melting
temperatures of alloys were examined by differential scanning calorimeter (DSC)
that SAC305 Pb-free alloy has lower than those of SAC300 and SAC0307 alloys.
The best wettability was found for SAC305 and this was followed by SAC300 and
SAC0307. The lowest value of contact angle for SAC305 was 41.90


 at 310

 on Cu substrate.

Kaynakça

  • [1] Çağlarırmak, N., Hepçimen, A. Z., "Effect of Heavy Metal Soil Pollution on Food Chain and Human Health", Akademik Gıda, 8(2): 31-35 (2010).
  • [2] Das, S.K., Sharif, A., Chan, Y.C., Wong, N.B., Yung, W.K.C., " Influence of small amount of Al and Cu on the microstructure, microhardness and tensile properties of Sn–9Zn binary eutectic solder alloy", J. Alloys Comp., 481(1-2): 167-172 (2009).
  • [3] Yang M., Ji H., Wang S., Ko Y.H., Lee C. W., Wu J., Li M. "Effects of Ag content on the interfacial reactions between liquid Sn-Ag-Cu solders and Cu substrates during soldering" Journal of Alloys and Compounds, 679:18-25, (2016).
  • [4] Duong, N. B.,Ariga, T., Hussain,L. B. and Ismail, A. B., " Wettability of lead-free solders on gold-plated copper substrates", Materials Transactions, 49(6): 1462-1466 (2008).
  • [5] Yoon, S. W.,Choi,W. K. and Lee, H. M., "Interfacial reaction between Sn-1Bi-5In-9Zn solder and Cu substrate", Scripta Materialia, 40(3): 297–302 (1999).
  • [6] Yuan, Y., Lee, T. R., " Contact Angle and Wetting Properties", Surface Science Techniques, Springer Series in Surface Sciences, 51: 3-34 (2013).
  • [7] Kumar, G., Prabhu, K. N., "Review of non-reactive and reactive wetting of liquids on surfaces", Advances in Colloid and Interface Science, 133(2): 61–89 (2007).
  • [8] Zhang, X.,Yuan, Z., Zhao, H., Zang, L. and LI, J., "Wetting behavior and interfacial characteristic of Sn-Ag-Cu solder alloy on Cu substrate" Chinese Science Bulletin, 55(9): 797-801 (2010).
  • [9] Zhang, X., Matsuura, H.,Tsukihashi, F.and Yuan,Z., " Effect of Addition of Small Amount of Zinc on Microstructural Evolution and Thermal Shock Behavior in Low-Ag Sn¬Ag¬Cu Solder Joints during Thermal Cycling", Material Transactions, 53(5): 926-931 (2012).
  • [10] Omac, F., Ozyurek, D.and Erer, M., "Investigation of the Wetting Properties of Ternary Lead-Free Solder Alloys on Copper Substrate", Acta Physica Polonocia- A, 131(1):165-167 (2017).
  • [11] Erer, A. M., Candan, E., Güven, M. H., Turen, Y., “Measurement and prediction of contact angles of Pb-free SnAg solder alloys on Cu substrate”, Eur. Phys. J. Appl. Phys., 54(1), 1-4, (2011).
Toplam 11 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Ahmet Mustafa Erer

Yayımlanma Tarihi 1 Eylül 2018
Gönderilme Tarihi 26 Nisan 2017
Yayımlandığı Sayı Yıl 2018 Cilt: 21 Sayı: 3

Kaynak Göster

APA Erer, A. M. (2018). Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate. Politeknik Dergisi, 21(3), 587-589. https://doi.org/10.2339/politeknik.399077
AMA Erer AM. Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate. Politeknik Dergisi. Eylül 2018;21(3):587-589. doi:10.2339/politeknik.399077
Chicago Erer, Ahmet Mustafa. “Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate”. Politeknik Dergisi 21, sy. 3 (Eylül 2018): 587-89. https://doi.org/10.2339/politeknik.399077.
EndNote Erer AM (01 Eylül 2018) Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate. Politeknik Dergisi 21 3 587–589.
IEEE A. M. Erer, “Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate”, Politeknik Dergisi, c. 21, sy. 3, ss. 587–589, 2018, doi: 10.2339/politeknik.399077.
ISNAD Erer, Ahmet Mustafa. “Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate”. Politeknik Dergisi 21/3 (Eylül 2018), 587-589. https://doi.org/10.2339/politeknik.399077.
JAMA Erer AM. Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate. Politeknik Dergisi. 2018;21:587–589.
MLA Erer, Ahmet Mustafa. “Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate”. Politeknik Dergisi, c. 21, sy. 3, 2018, ss. 587-9, doi:10.2339/politeknik.399077.
Vancouver Erer AM. Effect of Melting Temperature on Wettability of Sn-Ag-Cu Alloys on Cu Substrate. Politeknik Dergisi. 2018;21(3):587-9.
 
TARANDIĞIMIZ DİZİNLER (ABSTRACTING / INDEXING)
181341319013191 13189 13187 13188 18016 

download Bu eser Creative Commons Atıf-AynıLisanslaPaylaş 4.0 Uluslararası ile lisanslanmıştır.