Year 2019, Volume 15, Issue 1, Pages 125 - 130 2019-03-22

A Study on the Effects of Milling Strategy on Surface Roughness

Ayhan Etyemez [1] , Aziz Baran [2]

24 50

In this study, DIN 1.2344 hot work steel which was hardened at 51 HRC hardness value was processed by using high-speed milling technology, and different milling parameters with 6 mm-diameter spherical endmill and the surface qualities which were obtained as a result of milling were examined. Axial and radial feed values, feed value per tooth and depth of cut were changed between the range of 0.05 and 0.1 mm and the rate of cutting was changed between the range of 485 rpm and 4,000 rpm. These millings were carried out on material in the spherical form of which diameter was 21 mm, and the central angle was 150º. Also, milling directions were processed in different ways as climb milling, conventional milling and bidirectional milling in experimental cuttings. Surface roughness was examined in directions with 15º, 45º, 75º, 90º, 105º, 135º and 165º central angles on the material which was processed. The best surface quality was achieved in regions with 15º and 45º angles

High-speed milling, Surface quality, Milling strategy
  • 1. Dewes, R.C., Aspinwall, D.K. 1996. A review of ultra highspeed milling of hardened steels. Journal of Materials Processing Technology; 69: 1-17.
  • 2. Fallböhmer, P., Rodriguez, C. A., Özel. T., Altan, T. 2000. High-speed machining of cast iron and alloy steels for die and mold manufacturing. Journal of Materials Processing Technology; 98: 104-115.
  • 3. Vorasri, M., Jirapattarasilp, K., Kaewkuekool, S. 2011. The effect of high-speed milling on surface roughness of hardened tool steel, World Academy of Science, Engineering and Technology; 59: 469-472.
  • 4. Alam, S., Amin, A. N., Patwari, A. U. 2010. Surface texture investigation in high speed flat end milling of Ti-6Al-4V. International Conference on Industrial Engineering and Operations Management Dhaka, Bangladesh, January 9-10, 2010.
  • 5. Urbanski, J. P., Koshy, P., Dewes, R. C., Aspinwall, D. K. 2000. High speed machining of moulds and dies for net shape manufacture. Materials and Design; 21: 395-402.
  • 6. Toh, C. K. 2002. Surface topography analysis in high speed finish milling inclined hardened steel. Precision Engineering; 28: 386-398.
  • 7. Axinte, D. A., Dewes, R. C. 2002. Surface integrity of hot work tool steel after high speed milling-experimental data and empirical models. Journal of Material Processing Technology; 127: 325-335.
  • 8. Kasim, M. S., Che Haron, C. H., Ghani, J.A., Sulaiman, M.A. 2013. Prediction surface roughness in high-speed milling of inconel 718 under mql using rsm method. Middle-East Journal of Scientific Research; 13 (3): 264-272.
  • 9. Thangarasu, V. S., Sivasubramanian, R. 2012. High speed cnc machining of AISI 304 stainless steel; optimization of process parameters. International Journal of Mechanical Engineering and Robotics Research; 1 (3): 9-21.
  • 10. Baran, A. 2006. Sertleştirilmiş Kalıp Çeliklerinin Yüksek Hızda İşlenmesinde Uygun Kesme Parametrelerinin Seçimi. M. Ü. F. B. E. Yüksek Lisans Tezi.
  • 11. Yang Z., Xue Y., Li Y. Xu J., Wang Q. 2018. The effect of milling parameters on surface integrity in high-speed milling of ultrahigh strength steel. Procedia CIRP; 71:83-88
  • 12. Schulz, H., Moriwaki, T. 1992. High speed machining. Ann. CIRP; 41(2):637- 643.
  • 13. Nakagawa, T., 1992. Emerging new technologies in milling. 7th International Conference of Tool, Die and Mold Industry International Special Tooling Association, Bergamo, Italy;85
  • 14. Kauppinen, V., Paro J., Nieminen I. Application of high-speed milling to the finish manufacturing industry. Helsinki University of Technology, Technical Research Center of Finland, Espoo, Finland, 1993, pp 83.
  • 15. Eversheim, W., König, W., Bieker, R., Cobanoglu, M. 1989. Nc – frasbearbeitung on vergüteten schmiedegesenken. Technology & Engineering; 86: 99-103
  • 16. Field, M., Kahles, J. F., Koster, W. P. Surface Finish and Surface Integrity. ASM Handbook, Metcut Research Associates Inc., USA, 1980; pp 18 – 87.
  • 17. Vivancos, J., Luis, C.J., Costa, L., Ortiz, J.A. 2004. Optimal Machining Parameters Selection in High Speed Milling of Hardened Steels for Injection Molds. Journal of Material Processing Technology; pp 155-156:1505-1512.
Primary Language en
Subjects Engineering
Published Date 22-03-2019
Journal Section Articles
Authors

Orcid: 0000-0001-8188-2743
Author: Ayhan Etyemez (Primary Author)
Institution: Nikken Kesiciler Takımlar San. Tic. A.Ş.
Country: Turkey


Author: Aziz Baran
Institution: Metropolsoft
Country: Turkey


Bibtex @research article { cbayarfbe492270, journal = {Celal Bayar University Journal of Science}, issn = {1305-130X}, eissn = {1305-1385}, address = {Celal Bayar University}, year = {2019}, volume = {15}, pages = {125 - 130}, doi = {10.18466/cbayarfbe.492270}, title = {A Study on the Effects of Milling Strategy on Surface Roughness}, key = {cite}, author = {Etyemez, Ayhan and Baran, Aziz} }
APA Etyemez, A , Baran, A . (2019). A Study on the Effects of Milling Strategy on Surface Roughness. Celal Bayar University Journal of Science, 15 (1), 125-130. DOI: 10.18466/cbayarfbe.492270
MLA Etyemez, A , Baran, A . "A Study on the Effects of Milling Strategy on Surface Roughness". Celal Bayar University Journal of Science 15 (2019): 125-130 <http://dergipark.org.tr/cbayarfbe/issue/44005/492270>
Chicago Etyemez, A , Baran, A . "A Study on the Effects of Milling Strategy on Surface Roughness". Celal Bayar University Journal of Science 15 (2019): 125-130
RIS TY - JOUR T1 - A Study on the Effects of Milling Strategy on Surface Roughness AU - Ayhan Etyemez , Aziz Baran Y1 - 2019 PY - 2019 N1 - doi: 10.18466/cbayarfbe.492270 DO - 10.18466/cbayarfbe.492270 T2 - Celal Bayar University Journal of Science JF - Journal JO - JOR SP - 125 EP - 130 VL - 15 IS - 1 SN - 1305-130X-1305-1385 M3 - doi: 10.18466/cbayarfbe.492270 UR - https://doi.org/10.18466/cbayarfbe.492270 Y2 - 2019 ER -
EndNote %0 Celal Bayar University Journal of Science A Study on the Effects of Milling Strategy on Surface Roughness %A Ayhan Etyemez , Aziz Baran %T A Study on the Effects of Milling Strategy on Surface Roughness %D 2019 %J Celal Bayar University Journal of Science %P 1305-130X-1305-1385 %V 15 %N 1 %R doi: 10.18466/cbayarfbe.492270 %U 10.18466/cbayarfbe.492270
ISNAD Etyemez, Ayhan , Baran, Aziz . "A Study on the Effects of Milling Strategy on Surface Roughness". Celal Bayar University Journal of Science 15 / 1 (March 2019): 125-130. https://doi.org/10.18466/cbayarfbe.492270