Kolloidal Gümüş Suyunun Kompozit Rezinlerin Renk Stabilitesine Etkisi

Yıl 2023, , 390 - 396, 25.09.2023

Ahmet Hazar

https://doi.org/10.54617/adoklinikbilimler.1293984

Öz

Amaç: Bu çalışmanın amacı, kolloidal gümüş suyunun iki farklı kompozit rezinin renk stabilitesine olan etkisinin değerlendirilmesidir. Gereç ve yöntem: 2 mm kalınlığında ve 10 mm çapında disk şeklinde metal kalıplar kullanılarak iki farklı kompozit rezinden (Arabesk, G-aenial anterior) yirmişer örnek hazırlandı (n:20). Örnekler günde 2 kere 2 dakika süresince 30 gün boyunca kolloidal gümüş suyunda bekletildi ardından örneklere polisaj işlemi uygulandı. Başlangıç, 15, 30 gün sonrası ve polisaj işlemi arasındaki renk değişim değerleri (ΔE00) hesaplandı. İstatistiksel analiz için iki-yönlü ANOVA ve Tukey HSD testleri kullanıldı (p=0.05) Bulgular: Tüm gruplarda 15 gün sonraki ΔE00 değerleri, 30 gün sonraki ΔE00 değerlerine göre anlamlı derecede düşük bulundu (p<0.05). Kabul edilebilirlik değerinin üzerinde bulunan Arabesk grubunun 30 gün sonraki değerleri dışındaki tüm gruplarda renk değişimleri algılanabilirlik değerinin üzerindeydi. Örneklerin polisaj işlemi ile başlangıç renkleri arasındaki ΔE00 değerleri algılanabilirlik değerinin altındaydı. Sonuç: Kolloidal gümüş suyu kompozit restorasyonların renklerinde değişikliğe sebep olabilmektedir fakat polisaj işlemi bu renklenmelerin giderilmesinde etkilidir. Bu ürünleri düzenli kullanılan hastaların diş hekimi kontrollerini aksatmaması gerekmektedir.

Anahtar Kelimeler

Renk, Kompozit rezinler, Kolloidal gümüş

Effect of Colloidal Silver Water on the Color Stability of Composite Resins

Öz

Aim: The aim of this study is to evaluate the effect of colloidal silver water on the color stability of two different resin-based composites. Material and method: Twenty samples were prepared from two different composite resins (Arabesk, G-aenial anterior) using disc-shaped metal molds with a thickness of 2 mm and a diameter of 10 mm (n: 20). The samples were kept in colloidal silver water for 2 minutes twice a day for 30 days, then the samples were polished. Color change values (ΔE00) were calculated between initial, after-15, 30 days, and polishing procedure. Two-way ANOVA and Tukey HSD tests were used for statistical analysis (p=0.05). Results: The ΔE00 values measured after 15 days were found lower than the values measured after 30 days in all groups (p<0.05). ΔE00 values were above the perceptibility value in all groups except the after 30 days - Arabesk group, which was above the acceptability value. The ΔE00 values between the initial and after-polishing were below the perceptibility value. Conclusion: Colloidal silver water may cause changes in the colors of composite restorations, but the polishing process is effective in removing these discolorations. Patients who use these products regularly should not delay dental visits.

Anahtar Kelimeler

Color, Composite resins, Colloidal silver

Kaynakça

• 1. Bharti S, Mukherji S, Mukherji S. Antiviral application of colloidal and immobilized silver nanoparticles. Nanotechnology. 2021;14:205102.
• 2. Noronhaa VT, Paula AJ, Durán G, Galembeck A, Cogo-MüllerK, Franz-Montan M, et al. Silver nanoparticles in dentistry. Dent Mater 2017;33:1110–26.
• 3. Tiwari DK, Behari J, Sen P. Time and dose-dependent antimicrobial potential of Ag nanoparticles synthesized bytop-down approach. Current Sci 2008;95:647–55.
• 4. Ginjupalli K, Shaw T, Tellapraga C, Alla R, Gupta L,Perampalli NU. Does the size matter? Evaluation of effect ofincorporation of silver nanoparticles of varying particle sizeon the antimicrobial activity and properties of irreversiblehydrocolloid impression material. Dent Mater 2018;34:158–65.
• 5. Lv X, Wang P, Bai R, Cong Y, Suo S, Ren X, et al. Inhibitoryeffect of silver nanomaterials on transmissiblevirus-induced host cell infections. Biomater 2014;35:4195–203.
• 6. Rogers JV, Parkinson CV, Choi YW, Speshock JL, Hussain SM, Preliminary A. Assessment of silver nanoparticle inhibition of monkeypox virus plaque formation. Nanoscale Res Lett 2008;3:129–33.
• 7. Murdock RC, Braydich-Stolle L, Schrand AM, Schlager JJ, Hussain SM. Characterization of nanomaterial dispersion in solution prior to in vitro exposure using dynamic light scattering technique. Toxicol Sci 2008;101:239-53.
• 8. Kumar A, Goia DV. Comparative Analysis of Commercial Colloidal Silver Products [published correction appears in Int J Nanomedicine 2020;15:10425-34.
• 9. Baker CD, Federico MJ, Accurso FJ. Case report: skindiscoloration following administration of colloidal silver incystic fibrosis. Curr Opinion Pedi 2007;19:733–5.
• 10. Guler AU, Yilmaz F, Kulunk T, Guler A, Kurt S. Effects of different drinks on stainability of resin composite provisional restorative materials. J Prosthet Dent 2005;94:118-24.
• 11. Malekipour MR, Sharafi A, Kazemi S, Khazaei S, Shirani F. Comparison of color stability of a composite resin in different color media. Dent Res J (Isfahan) 2012;9:441-6.
• 12. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent 2019;31:103-12.
• 13. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
• 14. Lee YK, Yu B, Lee SH, Cho MS, Lee CY, Lim HN. Shade compatibility of esthetic restorative materials--A review. Dent Mater 2010;26:1119-26.
• 15. Herrera LJ, Pulgar R, Santana J, Cardona JC, Guillen A, Rojas I, et al. Prediction of color change after tooth bleaching using fuzzy logic for Vita Classical shades identification. Appl Opt 2010;49:2-9.
• 16. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent 2010;38:57-64.
• 17. Leino V, Airaksinen R, Viluksela M, Vähäkangas K. Toxicity of colloidal silver products and their marketing claims in Finland. Toxicol Rep 2020;8:106-13.
• 18. Arzani FA, Dos Santos JHZ. Biocides and techniques for their encapsulation: a review. Soft Matter 2022;18:5340-58.
• 19. Chu CH, Lo EC, Lin HC. Effectiveness of silver diamine fluoride and sodium fluoride varnish in arresting dentin caries in Chinese pre-school children. J Dent Res 2002;81:767-70.
• 20. Llodra JC, Rodriguez A, Ferrer B, Menardia V, Ramos T, Morato M. Efficacy of silver diamine fluoride for caries reduction in primary teeth and first permanent molars of schoolchildren: 36-month clinical trial. J Dent Res 2005;84:721-4.
• 21. Kasraei S, Azarsina M. Addition of silver nanoparticles reduces the wettability of methacrylate and silorane-based composites. Braz Oral Res 2012;26:505-10.
• 22. Chang JY, Chen WC, Huang TK, Wang JC, Fu PS, Chen JH, et al. Evaluating the accuracy of tooth color measurement by combining the Munsell color system and dental colorimeter. Kaohsiung J Med Sci 2012;28:490-4.
• 23. Ardu S, Gutemberg D, Krejci I, Feilzer AJ, Di Bella E, Dietschi D. Influence of water sorption on resin composite color and color variation amongst various composite brands with identical shade code: an in vitro evaluation. J Dent 2011;39:37–44.
• 24. Bagheri R, Burrow MF, Tyas M. Influence of foodsimulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389–98
• 25. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomater 2003;24:655-65.
• 26. Gonulol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent 2012;40:64-70.
• 27. Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: An in vitro study. Dent Mater 1994;10:353-62.
• 28. Fontes ST, Fernández MR, de Moura CM, Meireles SS. Color stability of a nanofill composite: Effect of different immersion media. J Appl Oral Sci 2009;17:388-91.